رد: في برمجة داكرة g532f جديدة
عليك كتابة فلاشة mtk scatter
write by vendor mediatek
عليك كتابة فلاشة mtk scatter
write by vendor mediatek
[LEFT]Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2283 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111106.extcsd
EMMC Init completed.
Opening file: MT6752_Android_scatter (new_format).txt
The new format of scatter
config_version: V1.1.1
platform: MT6752
preloader.bin
Found 4 supported eMMC CID:
name = 'QN16MB' hex = 0x514E31364D42 [SAMSUNG]
name = 'H8G4u' hex = 0x483847347592 [SKHYNIX]
name = 'FN12MB' hex = 0x464E31324D42 [SAMSUNG]
name = 'QN16BB' hex = 0x514E31364242 [SAMSUNG]
The size of the last section has been updated
Large file size: C:\Users\gsm\Desktop\SM-G532F Scatter self read By sky mobile\param.bin
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2285 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111209.extcsd
EMMC Init completed.
Operation: Repairing eMMC CID...
Success!
Now Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0] to finalize CID Patch !
[/LEFT]
[LEFT]Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2285 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111725.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000 (4,00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8,00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2,00 MB)
Partition: bota1, [000001200000 - 000001400000], size: 000000200000 (2,00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7,00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512 KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512 KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6,00 MB)
Partition: bota2, [000002200000 - 000002800000], size: 000000600000 (6,00 MB)
Partition: efs, [000002800000 - 000003000000], size: 000000800000 (8,00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32,0 MB)
Partition: param, [000005000000 - 000005800000], size: 000000800000 (8,00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16,0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16,0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32,0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4,00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8,00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3,50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2,50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512 KB)
Partition: persistent, [00000AA80000 - 00000AB00000], size: 000000080000 (512 KB)
Partition: steady, [00000AB00000 - 00000AC00000], size: 000000100000 (1,00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8,00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8,00 MB)
Partition: reserve2, [00000BC00000 - 00000C000000], size: 000000400000 (4,00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3,01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400 MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60,0 MB)
Partition: userdata, [0000E9400000 - 0003A3DFBE00], size: 0002BA9FBE00 (10,9 GB)
GPT header successfully parsed
Get firmware version
Firmware info not found
[/LEFT]
eMMC_tool Suite ver. 1.6.6.0 (release date: 05.05.2021)
Microsoft Windows 10 (64 bit) build 19043 (10.0.19041.1466)
Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 05C0FEBDF87226CC
Card Serial = AA047E54
EasyJTAG Box Firmware = 2.5302
Changelog:
05.05.2021 (ver 1.6.6.0)
Add: New keys for Oppo unpack
Fix: Bugs that have been found through your crash report
05.05.2021 (ver 2.0.1.0)
Add: Vendor LG
Add: Mediatek Preloader Parser
Add: OnePlus Unpacker
Add: Xiaomi Custom EDL Authorization
Add: Xiaomi Remove Mi Account (only Qualcomm)
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A483847347592011F17291AC181
EMMC CSD: D02701320F5903FFF6DBFFEF92404009
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1F17291A , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1F17291A_20220210_201834.extcsd
EMMC Init completed.
Warning: BusWidth is automatically set to 1 Bit
Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000 (4,00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8,00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2,00 MB)
Partition: bota1, [000001200000 - 000001400000], size: 000000200000 (2,00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7,00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512 KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512 KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6,00 MB)
Partition: bota2, [000002200000 - 000002800000], size: 000000600000 (6,00 MB)
Partition: efs, [000002800000 - 000003000000], size: 000000800000 (8,00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32,0 MB)
Partition: param, [000005000000 - 000005800000], size: 000000800000 (8,00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16,0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16,0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32,0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4,00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8,00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3,50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2,50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512 KB)
Partition: persistent, [00000AA80000 - 00000AB00000], size: 000000080000 (512 KB)
Partition: steady, [00000AB00000 - 00000AC00000], size: 000000100000 (1,00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8,00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8,00 MB)
Partition: reserve2, [00000BC00000 - 00000C000000], size: 000000400000 (4,00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3,01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400 MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60,0 MB)
Partition: userdata, [0000E9400000 - 0003A3DFBE00], size: 0002BA9FBE00 (10,9 GB)
GPT header successfully parsed
Get firmware version
Firmware info not found