طلب مساعدة في برمجة داكرة g532f جديدة

dahmani med · 26 جانفي 2022

رد: في برمجة داكرة g532f جديدة

عليك كتابة فلاشة mtk scatter

write by vendor mediatek

sempal · 26 جانفي 2022

رد: في برمجة داكرة g532f جديدة

بعد ما كتبة تصليح بوت سكاتر ظهرت لي رسالة تطلب مني تغيير cid عملت موافقة ووضعت cid وحده الدي وجدته مصحوب مع سكاتر (H8G4u_0E24D0DC_info)
)
cid الدي وضعته

90014A483847347592010E24D0DC2594

كود:

[LEFT]Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2283 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111106.extcsd
EMMC Init completed.

Opening file: MT6752_Android_scatter (new_format).txt

The new format of scatter
config_version: V1.1.1
platform: MT6752
preloader.bin
Found 4 supported eMMC CID:
name = 'QN16MB'     hex = 0x514E31364D42     [SAMSUNG]
name = 'H8G4u'     hex = 0x483847347592     [SKHYNIX]
name = 'FN12MB'     hex = 0x464E31324D42     [SAMSUNG]
name = 'QN16BB'     hex = 0x514E31364242     [SAMSUNG]

The size of the last section has been updated
Large file size: C:\Users\gsm\Desktop\SM-G532F Scatter self read By sky mobile\param.bin

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2285 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111209.extcsd
EMMC Init completed.

Operation: Repairing eMMC CID...

Success!
Now Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0] to finalize CID Patch !
[/LEFT]

وهدا انفو بعد تصليح

كود:

[LEFT]Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 MHz
CMD Pullup Level: 2132 mV
CMD Active Level: 2285 mV
EMMC Device Information :
EMMC CID: 150100513331364242021D9CCC57753F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: Q316BB , HEX: 513331364242 , S/N: 1D9CCC57 , rev. 0x02
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 7/2018
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: Q316BB_1D9CCC57_20220126_111725.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000 (4,00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8,00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2,00 MB)
Partition: bota1, [000001200000 - 000001400000], size: 000000200000 (2,00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7,00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512 KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512 KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6,00 MB)
Partition: bota2, [000002200000 - 000002800000], size: 000000600000 (6,00 MB)
Partition: efs, [000002800000 - 000003000000], size: 000000800000 (8,00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32,0 MB)
Partition: param, [000005000000 - 000005800000], size: 000000800000 (8,00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16,0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16,0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32,0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4,00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8,00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3,50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2,50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512 KB)
Partition: persistent, [00000AA80000 - 00000AB00000], size: 000000080000 (512 KB)
Partition: steady, [00000AB00000 - 00000AC00000], size: 000000100000 (1,00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8,00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8,00 MB)
Partition: reserve2, [00000BC00000 - 00000C000000], size: 000000400000 (4,00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3,01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400 MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60,0 MB)
Partition: userdata, [0000E9400000 - 0003A3DFBE00], size: 0002BA9FBE00 (10,9 GB)
GPT header successfully parsed

Get firmware version

Firmware info not found
[/LEFT]

dahmani med · 26 جانفي 2022

رد: في برمجة داكرة g532f جديدة

احيانا لابد من تمرير دامب full dump
موجود في سيبور البوكس :bup:

.:: Sebti _ Gsm ::. · 26 جانفي 2022

رد: في برمجة داكرة g532f جديدة

اعتقد ان المشكل في الادبتر المستعمل او في التلحيم

الله يصبرك. اعد نزع الذاكرة وعدل cid مباشرة E-Socket
بدون تغيير cid لن يقلع البوت

sempal · 30 جانفي 2022

رد: في برمجة داكرة g532f جديدة

نفس المشكل اخواني كل العمليات بأت بفشل هل من حل

mohamed_nv · 6 فيفري 2022

رد: في برمجة داكرة g532f جديدة

الذاكرة من نوع 5.1 عليك بعمل ابديت فرموار اولا للذاكرة لتقبل التغيير
ثم من خانة change cid تجدها في advance غير الاسم فقط إلى QN16MB
ثم اضبط مسار الإقلاع أو حمل دامب مباشرة من shell الخاص بz3x
بإذن الله سيقلع معك اذا اتبعت هده الخطوات بالترتيب

sempal · 10 فيفري 2022

رد: في برمجة داكرة g532f جديدة

كود:

eMMC_tool Suite  ver. 1.6.6.0 (release date: 05.05.2021)
Microsoft Windows 10 (64 bit) build 19043 (10.0.19041.1466)

Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 05C0FEBDF87226CC
Card Serial = AA047E54
EasyJTAG Box Firmware = 2.5302

Changelog:

05.05.2021 (ver 1.6.6.0)
   Add:   New keys for Oppo unpack
   Fix:   Bugs that have been found through your crash report
05.05.2021 (ver 2.0.1.0)
   Add:   Vendor LG
   Add:   Mediatek Preloader Parser
   Add:   OnePlus Unpacker
   Add:   Xiaomi Custom EDL Authorization
   Add:   Xiaomi Remove Mi Account (only Qualcomm)

Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A483847347592011F17291AC181
EMMC CSD: D02701320F5903FFF6DBFFEF92404009
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 1F17291A , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 12/2014
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Maybe not clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01) 
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_1F17291A_20220210_201834.extcsd
EMMC Init completed.

Warning: BusWidth is automatically set to 1 Bit

Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000 (4,00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8,00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2,00 MB)
Partition: bota1, [000001200000 - 000001400000], size: 000000200000 (2,00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7,00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512 KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512 KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6,00 MB)
Partition: bota2, [000002200000 - 000002800000], size: 000000600000 (6,00 MB)
Partition: efs, [000002800000 - 000003000000], size: 000000800000 (8,00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32,0 MB)
Partition: param, [000005000000 - 000005800000], size: 000000800000 (8,00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16,0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16,0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32,0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4,00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8,00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3,50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2,50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512 KB)
Partition: persistent, [00000AA80000 - 00000AB00000], size: 000000080000 (512 KB)
Partition: steady, [00000AB00000 - 00000AC00000], size: 000000100000 (1,00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8,00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8,00 MB)
Partition: reserve2, [00000BC00000 - 00000C000000], size: 000000400000 (4,00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3,01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400 MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60,0 MB)
Partition: userdata, [0000E9400000 - 0003A3DFBE00], size: 0002BA9FBE00 (10,9 GB)
GPT header successfully parsed

Get firmware version

Firmware info not found

andi-gsm · 10 فيفري 2022

رد: في برمجة داكرة g532f جديدة

استعمل ال pit و bl

sempal · 10 فيفري 2022

رد: في برمجة داكرة g532f جديدة

هل تم التصحيح هكذا لاني غيرت ذاكرة اخرى وشكرالكم على متابعة وخاصتنا اخ محمد بارك الله فيه

طلب مساعدة في برمجة داكرة g532f جديدة

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::

sempal

عضو أساسي

dahmani med

:: مراقب قسم العام + قسم الهاردوير والصيانة ::

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::

sempal

عضو أساسي

mohamed_nv

عضو

sempal

عضو أساسي

andi-gsm

:: عضو مميز ::

sempal

عضو أساسي