تجارب الأعضاء الناجحة على واجهة UMT Dongle

pera · 5 أفريل 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

• حدف حساب GOOGLE ACCENT Caceleon C6 •

كود:

Brand : AccentModel : Cameleon C6
Operation : Reset FRP
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : ACCENT
Manufacturer : ACCENT
Model : CAMELEON_C6
Prod. Name : CAMELEON_C6
Device : CAMELEON_C6
Platform : mt6580
Android Ver. : 7.0
Display ID : YK668_BSF36B_ACCENT_CAMELEON_C6_V05_20170913
Patch Level : 2017-07-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.7]

فيصل16 · 7 أفريل 2020

Huawei MediaPad T3 BG2-U01 Reset FRP

Ahmed-GsM · 13 أفريل 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Starlight Star_Plus Reset FRP

Ahmed-GsM · 18 أفريل 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Oppo F3 CPH1609 FRP And Pattern Remove Done

كود:

[B][FONT=Arial Black][SIZE=2]Brand : [COLOR="#FF0000"]Oppo[/COLOR]
Model : [COLOR="#FF0000"]F3 (CPH1609)[/COLOR]
Operation : [COLOR="#FF0000"]Format FS[/COLOR]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM20)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connecting to HighSpeed Port...
Waiting for HighSpeed Port..
Port : MediaTek DA USB VCOM (Android) (COM19)
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : OPPO
Manufacturer : OPPO
Model : CPH1609
Prod. Name : CPH1609
Device : CPH1609
Board : full_oppo6750_16391
Platform : mt6750
Android Ver. : 6.0
Display ID : CPH1609EX_11_A.32_191228
Patch Level : 2018-06-05
Userdata is ENCRYPTED
Formatting userdata...
[COLOR="#FF0000"]- Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.8][/SIZE][/FONT][/B]

فيصل16 · 22 أفريل 2020

Samsung Galaxy J5 J500H FRP Reset

Ahmed-GsM · 24 أفريل 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

wiko sunny Format FS done

كود:

[B][FONT=Arial][SIZE=2]Brand : [COLOR="#FF0000"]Wiko[/COLOR]
Model : [COLOR="#FF0000"]Sunny[/COLOR]
Operation : [COLOR="#FF0000"]Format FS[/COLOR]
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : WIKO
Manufacturer : WIKO
Model : SUNNY
Prod. Name : V2502AN
Device : V2502AN
Platform : mt6580
Android Ver. : 6.0
Display ID : MRA58K release-keys
Patch Level : 2017-06-05
Userdata is NOT ENCRYPTED
Formatting userdata...
[COLOR="#FF0000"]- Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.8][/SIZE][/FONT][/B]

Ahmed-GsM · 28 أفريل 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Redmi 2 LTE Read Pattern Lock

كود:

[B]Operation	: [COLOR="#FF0000"]Read Pattern Lock[/COLOR]
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info	: Quanta Wireless Corp, qcusbser.sys, 2.1.0.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1507000 [8916] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8916, eMMC, 8 GB
LU Count	: 1 [0x00E90000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi 2014811 [msm8916] [HM2014811]
Software	: KTU84P, V66.44.33.00.KHJCNCB [Sat Apr  4 19:24:09 CST 2015]
Android Ver.	: 4.4.4
USERDATA	: Normal
Reading Pattern Data...Done
Pattern	: [COLOR="#FF0000"]1258963[/COLOR]
Operation Finished.
QcFire Ver. 5.5 [/B]

pera · 1 ماي 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

• [ Remove FRP Altice Startrail 7 [ fastboot mode •

فيصل16 · 3 ماي 2020

SAMSUNG J1 ACE NEO SM-J111F FRP Reset

فيصل16 · 15 ماي 2020

Samsung J5 2016 (SM-J510FN/DS) FRP Reset

Samsung J5 2016 (SM-J510FN) FRP Reset (U2) 7.1.1

(By Downgrade To 6.0 (U2

فيصل16 · 21 ماي 2020

Samsung J7 J700H/DS FRP Reset

فيصل16 · 30 ماي 2020

Huawei Mate 10 ALP-L29 FRP Reset

فيصل16 · 30 ماي 2020

Oppo A5s CPH1909 Factory Reset

Ahmed-GsM · 4 جوان 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Infinix s3x x622 Format FS

كود:

[B]Operation	: Read Information
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM52)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1F00400 [8937] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: INFINIX MOBILITY LIMITED Infinix X622 [Infinix-X622]
Software	: X622-QL1818BCDE-O-181110V56, BCDE-181110V56 [Sat Nov 10 16:47:32 CST 2018]
Android Ver.	: 8.1.0
Patch Level	: 2018-11-01
USERDATA	: Encrypted
You can use DISABLE LOCKS to Disable Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 5.6[/B]

كود:

[B]Operation	: Format FS
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM52)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1F00400 [8937] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: INFINIX MOBILITY LIMITED Infinix X622 [Infinix-X622]
Software	: X622-QL1818BCDE-O-181110V56, BCDE-181110V56 [Sat Nov 10 16:47:32 CST 2018]
Android Ver.	: 8.1.0
Patch Level	: 2018-11-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 5.6[/B]

Ahmed-GsM · 23 جوان 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Samsung Galaxy J3 (2016) SM-J320FN FRP Reset

Brand : Samsung
Model : J320FN
Operation : Reset FRP
Searching for Phone...Found
Port: : COM67 : SAMSUNG Mobile USB Modem #21
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : SPRD8735 [HiSpeed]
Loading Data...OK
Resetting FRP Data...OK
Closing Session...Done
---------------- IMPORTANT ----------------
Wait for phone to turn on completely.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Operation Finished.
UltimateFRP Ver. 0.5

Ahmed-GsM · 27 جوان 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

OPPO A37F Format FS

كود:

[B]Device	: [COLOR="#FF0000"]Oppo A37f[/COLOR]
Operation	: [COLOR="#FF0000"]Read Information[/COLOR]
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM52)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1507000 [8916] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8916, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: OPPO A37f [msm8916]
Software	: A37fEX_11_171008, 1480422943 [Sun Oct  8 17:26:49 CST 2017]
Android Ver.	: 5.1.1
Patch Level	: 2017-09-01
USERDATA	: Normal
You can use RESET LOCKS to remove Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 5.6[/B]

كود:

[B]Device	: [COLOR="#FF0000"]Oppo A37f[/COLOR]
Operation	: [COLOR="#FF0000"]Format FS[/COLOR]
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM52)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1507000 [8916] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8916, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: OPPO A37f [msm8916]
Software	: A37fEX_11_171008, 1480422943 [Sun Oct  8 17:26:49 CST 2017]
Android Ver.	: 5.1.1
Patch Level	: 2017-09-01
[COLOR="#FF0000"]Formatting userdata [SafeMode]...Done
Resetting FRP Lock......Done[/COLOR]
Operation Finished.
QcFire Ver. 5.6[/B]

Ahmed-GsM · 28 جوان 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Infinix X626 Format FS Done

كود:

[B] Brand : Infinix
Model : [COLOR="#FF0000"]Hot S4 (X626B)[/COLOR]
Operation : [COLOR="#FF0000"]Read Info[/COLOR]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM30)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : [COLOR="#FF0000"]Infinix X626[/COLOR]
Prod. Name : [COLOR="#FF0000"]H624[/COLOR]
Device : [COLOR="#FF0000"]Infinix-X626[/COLOR]
Android Ver. : 9
Display ID : X626-H624JK-P-190530V277
Patch Level : 2019-06-05
Userdata is ENCRYPTED
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.0][/B]

كود:

[B]Brand : Infinix
Model : [COLOR="#FF0000"]Hot S4 (X626B)[/COLOR]
Operation : [COLOR="#FF0000"]Format FS[/COLOR]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM30)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Infinix
Manufacturer : INFINIX MOBILITY LIMITED
Model : Infinix X626
Prod. Name : H624
Device : Infinix-X626
Android Ver. : 9
Display ID : X626-H624JK-P-190530V277
Patch Level : 2019-06-05
Userdata is ENCRYPTED
[COLOR="#FF0000"]Formatting userdata...
- Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.0]
[/B]

Ahmed-GsM · 1 جويلية 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

LENOVO A319 STOP ON LOGO FORMAT FS DONE

كود:

[B]Brand : [COLOR="#FF0000"]Lenovo[/COLOR]
Model : [COLOR="#FF0000"]A319[/COLOR]
Operation : [COLOR="#FF0000"]Read Info[/COLOR]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM30)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Lenovo
Manufacturer : LENOVO
Model : Lenovo A319
Prod. Name : A319
Device : A319
Board : A319
Android Ver. : 4.4.2
Display ID : A319_ROW_DS_S313_MOD_V1.2
Userdata is NOT ENCRYPTED
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.0][/B]

كود:

[B]Brand : [COLOR="#FF0000"]Lenovo[/COLOR]
Model : [COLOR="#FF0000"]A319[/COLOR]
Operation : [COLOR="#FF0000"]Format FS[/COLOR]
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM30)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : Lenovo
Manufacturer : LENOVO
Model : Lenovo A319
Prod. Name : A319
Device : A319
Board : A319
Android Ver. : 4.4.2
Display ID : A319_ROW_DS_S313_MOD_V1.2
Userdata is NOT ENCRYPTED
[COLOR="#FF0000"]Formatting userdata...
- Done.[/COLOR]
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.0][/B]

Ahmed-GsM · 6 جويلية 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Condor SP-622 FORMAT FS

Ahmed-GsM · 6 جويلية 2020

رد: تجارب الأعضاء الناجحة على واجهة UMT Dongle

Samsung J111H FRP Reset

تجارب الأعضاء الناجحة على واجهة UMT Dongle

:: عضو محترف ::, ,

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: عضو محترف ::, ,

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مشرف قسم Sigma/Z3x/Octoplus ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::

:: مراقب قسم السوفت ويير والبرمجة ::