تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة فوق
- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Condor T5 (SP630) FRP Reset
Condor T5 (SP630) FRP Reset
كود:
Operation : Format FS / Reset Settings [ v2.14 ]Mode : Reset FRP
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:29- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Wise Tech (Tech A1 Plus) Read Firmware
Wise Tech (Tech A1 Plus) Read Firmware
كود:
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : Wise_Tech
Product Device : Tech_A1_Plus
Product Model : Tech_A1_Plus
Product Name : Tech_A1_Plus
Patch Level : QP1A.190711.020
Display ID : Tech_A1_Plus_20201222_V1.0
Ver. Incmt : 2020125
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 22.12.2020
Product Info : Tech_A1_Plus
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Manfct : incar
AndroidVer : 10
VlnrLevel : 0x02
SP9832E__10__Tech_A1_Plus_20201222_V1.0__QP1A.190711.020__Tech_A1_Plus
Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : deltanv_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 2%
Read : socko.img
ExtSparse : Compression ratio : 34%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin
Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Found vodka!
Just some noise around. Wait ...
Found bear!
Firmware size : 0x7E1FCC1C ( 1.97 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:15:55- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Tecno Pop 2F - B1G - Hard Reset & FRP Reset
[/CODE]
Tecno Pop 2F (B1G) Hard Reset & FRP Reset
كود:
Operation : Identify [ v2.14 ]BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : W6003-F3108
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : TECNO
Product Name : B1g-OP
Product Device : TECNO-B1g
Product Model : TECNO B1g
Product Board : B1g
Patch Level : QP1A.190711.020
Display ID : B1g-SP559ABC-QGo-OP-210402V010
Ver. Incmt : ABC-OP-210402V010
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-03-05
Build Time : 02.04.2021
Product Info : sp7731e_1h10
Product Board : sp7731e_1h10
Board Platform : sp7731e
Product Manfct : TECNO
Product Manfct : TECNO MOBILE LIMITED
Platform Version: MOCORTM_17C_W20.45.5_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W20.45.5
HW Version: sc7731e_modem
CMP_Time : 11-06-2020 00:00:59
MODEM TAG : MOCORTM_17C_W20.45.5_Debug_FM_BASE_17C_W20.45.5_sc7731e_modem_pike2_pub
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:02:03
[CODE]Card found : 00000000 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : W6003-F3108
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable![/CODE]
- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Oppo A16s (CPH2271) FRP Reset
Oppo A16s (CPH2271) FRP Reset
كود:
Operation : Reset Settings/Format FS [ v2.32 ]
Mode : FRP [ RESET PROTECTION ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM278)
MODE : PRELOADER PORT
PORT : 278
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM245)
MODE : BOOTROM
PORT : 245
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 40E570EF3CB1F0F49BF2546EBEB6D742
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 0BD8EAD812F36776F5FD2AC4C22798E9B7E7783B89B06F3C7348D4F4B54ED392
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_oppo6765.bin
EMI : CNT : 0009
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]
EMMC: CID : 13014E47314A395238101B41FE202951
EMMC: VEN : MICRON : OEM : 78 : ID : 47314A395238
EMMC: VEN : MICRON : G1J9R8
EMMC: SNN : 457309728 ( 0x1B41FE20) , MF : 2/2022
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : C745890D148C1E8FA82AC58BD844273B
DA : USB : HIGH-SPEED
Boot done!
Format Ok : RESET PROTECTION
Done!
Elapsed: 00:02:03
Reconnect Power/Cable!
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة
CONDOR- T4-SP531-SMART RESET
CONDOR- T4-SP531-SMART RESET
كود:
Operation: Identify Device [ v2.45 ]Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM10)
MODE [0]: PRELOADER PORT; PORT: 10
Waiting for BOOT ACK...
PRELOADER ACK Ok
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 484A0190613447381200A192DF63AE50
DA v4.2.156
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC CID: 90014A483847346192A1001250AE63DF
VEN: Hynix OEM: 330 ID: 483847346192 [H8G4a’] PRV: 0xA1
SNN: 1200302 [0x001250AE]
MM/YY: 6/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x1D2000000 [ 7.28 Gb ]
SRAM: 0x00020000 [ 128.00 Kb ]
DRAM: 0x40000000 [ 1.00 Gb ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: DFEFB090A886DF2435658E7C0E11D3A2
DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT
USB: HIGH-SPEED
Boot done LEGACY [MTK]
Analyze PMT... Ok
PMT: LGPT [0x06] Records: 24
Select info source... Ok
Patch Level: NRD90M
Display ID: SP531_V11_20180320
SW Version: 1521508189
Ver. CodeName: REL
Ver. Release: 7.0
Sec. Patch: 2017-10-05
Build Time: 3/20/2018 1:09:48 AM
Product Model: SP531
Product Brand: Condor
Product Name: SP531
Product Device: SP531
CPU: armeabi-v7a,armeabi
Product Manfct: SPA Condor Electronics
Board Platform: mt6580
Product Info: aeon6580_we_n
SW: full_aeon6580_we_n-user 7.0 NRD90M 1521508189 release-keys
Strategy: [none|generic]
Firmware ID: MT6580_SPA_Condor_Electronics_SP531_OSv7.0_SP531_V11_20180320_NRD90M_aeon6580_we_n
Verify firmware [MT6580_SPA_Condor_Electronics_SP531_OSv7.0_SP531_V11_20180320_NRD90M_aeon6580_we_n]...
Finished
Analyze userdata...
userData: fileSystem [ext4] with FDE [encryptable]
Analyze modem... Nothing
Analyze nvram...
NVRAM: Items: 0x75 Size: 0x0292D8 State: Ok
WiFi MAC: 2A23B5221CAE
BlTh MAC: 2B23F5226C63
IMEI[1]: 353895091867156
IMEI[2]: 353895091867164
Verify device config...
Finished
Backup to C:\InfinityBox\CM2MT2\backup\MT6580__DFEFB090A886DF2435658E7C0E11D3A2\
Items to check: 20
Read [3] NVRAM
Read [14] NVDATA
Read [2] PROINFO
Read [7] LK
Read [4] PROTECT1
lda-pt: pgpt
Read [0] PRELOADER
Done 6 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6580__DFEFB090A886DF2435658E7C0E11D3A2\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6580__DFEFB090A886DF2435658E7C0E11D3A2.7z
Finished
Analyze preloader...
EMI: MT6752 preloader_aeon6580_we_n.bin with 8 memory type(s)
1. eMMC DDR3 ID: 90014A483847346132 Ven: Hynix | Dev: H8G4a2 RAM: 1.00 Gb
2. eMMC DDR3 ID: 700100563130303038 Ven: Kingston | Dev: V10008 RAM: 1.00 Gb
3. eMMC DDR3 ID: 150100464E58324D42 Ven: Samsung | Dev: FNX2MB RAM: 1.00 Gb
4. eMMC DDR3 ID: 90014A483847316505 Ven: Hynix | Dev: H8G1e RAM: 1.00 Gb
5. eMMC DDR3 ID: 150100513732534D42 Ven: Samsung | Dev: Q72SMB RAM: 1.00 Gb
6. eMMC DDR3 ID: FE014E50314A39354B Ven: Micron | Dev: P1J95K RAM: 1.00 Gb
7. eMMC DDR3 ID: 13014E51324A393554 Ven: Micron | Dev: Q2J95T RAM: 1.00 Gb
8. eMMC DDR3 ID: 90014A483847346192 Ven: Hynix | Dev: H8G4a’ RAM: 1.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_aeon6580_we_n.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_aeon6580_we_n.bin [d30914da]...
Finished
Done: 00:01:58
Reconnect Power/Cable now
Operation: Reset Settings/Format FS [ v2.45 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port_V1633 (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
MEID: F196E584890335F628BA2DD4B4C8E58F
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0x05 BL: 0xFE [BOOTROM]
BROM: EMI: Search
EMI: Found
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6580
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 484A0190613447381200A192DF63AE50
DA v4.2.156
EXT_RAM NOT initialized
EMMC: OK
CID: 90014A483847346192A1001250AE63DF
NAND: DEVICE NOT FOUND
DRAM: 0x00BC
EMI: FireFly preloader_aeon6580_we_n.bin with 8 memory type(s)
1. ID: 90014A483847346132 Ven: Hynix | Dev: H8G4a2 RAM: 1.00 Gb
2. ID: 700100563130303038 Ven: Kingston | Dev: V10008 RAM: 1.00 Gb
3. ID: 150100464E58324D42 Ven: Samsung | Dev: FNX2MB RAM: 1.00 Gb
4. ID: 90014A483847316505 Ven: Hynix | Dev: H8G1e RAM: 1.00 Gb
5. ID: 150100513732534D42 Ven: Samsung | Dev: Q72SMB RAM: 1.00 Gb
6. ID: FE014E50314A39354B Ven: Micron | Dev: P1J95K RAM: 1.00 Gb
7. ID: 13014E51324A393554 Ven: Micron | Dev: Q2J95T RAM: 1.00 Gb
8. ID: 90014A483847346192 Ven: Hynix | Dev: H8G4a’ RAM: 1.00 Gb
INIT: 0x00BC DRAM [ 0x00000000 [ 0 B ] ]
DRAM: DRAM: 0x40000000 [ 1.00 Gb ]
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC CID: 90014A483847346192A1001250AE63DF
VEN: Hynix OEM: 330 ID: 483847346192 [H8G4a’] PRV: 0xA1
SNN: 1200302 [0x001250AE]
MM/YY: 6/2016
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x1D2000000 [ 7.28 Gb ]
SRAM: 0x00020000 [ 128.00 Kb ]
DRAM: 0x40000000 [ 1.00 Gb ]
CHIP: MT6580 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x6580
TYPE: LEGACY [MTK]
RNID: DFEFB090A886DF2435658E7C0E11D3A2
MEID: F196E584890335F628BA2DD4B4C8E58F
DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT
USB: FULL-SPEED
Change Port Speed
PTFN: MediaTek DA USB VCOM (Android) (COM9)
MODE: PRELOADER PORT; PORT: 9
Boot done LEGACY [MTK]
Analyze PMT... Ok
PMT: LGPT [0x06] Records: 24
Select info source... Ok
Patch Level: NRD90M
Display ID: SP531_V11_20180320
SW Version: 1521508189
Ver. CodeName: REL
Ver. Release: 7.0
Sec. Patch: 2017-10-05
Build Time: 3/20/2018 1:09:48 AM
Product Model: SP531
Product Brand: Condor
Product Name: SP531
Product Device: SP531
CPU: armeabi-v7a,armeabi
Product Manfct: SPA Condor Electronics
Board Platform: mt6580
Product Info: aeon6580_we_n
SW: full_aeon6580_we_n-user 7.0 NRD90M 1521508189 release-keys
Strategy: [none|generic]
SmartInfo: Android Ver: 7 UserDataFS: 0x01 [ext4|4+] CacheFS: 0x01 [ext4|4+]
Verify device config...
Finished
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6580__F196E584890335F628BA2DD4B4C8E58F
Stage a: SMART RESET
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Verified
Stage c: SMART RESET
Stage d: SMART RESET
In case of "DL IMAGE FAIL" message after reset use Service -> [Fix DL] button
Done: 00:00:28
Reconnect Power/Cable now- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
WISE TECH A7 Read User Code
WISE TECH A7 Read User Code
كود:
Operation : Read UserCode [ v1.57 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 283 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 55E2B38BF7D3AED71397B0AF7A192A54
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Read ExtData
Sorting ExtData
Reading UserCode
Active : Yes , Code : 1111
PLock|MobTrack : Not active
Done!
Elapsed: 00:00:17
Reconnect Power/Cable!
izawa2008
عضو أساسي
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة
Redmi A2 Plus
23028RNCAG
SMART RESET+ frp
Redmi A2 Plus
23028RNCAG
SMART RESET+ frp
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة
CONDOR- L3 SMART- SMART RESET
CONDOR- L3 SMART- SMART RESET
كود:
Chinese Miracle II - MT2 Service Tool v2.45[B][I]Init log engine... Ok[/I][/B]
[B][I]Build directories tree... Ok[/I][/B]
[B][I]Firmware files: C:\Users\ALI-CHAIMA-88\Desktop\[/I][/B]
[B][I]Backup files: C:\InfinityBox\CM2MT2\backup\[/I][/B]
[B][I]Backup files: 6 dirs: 0[/I][/B]
[B][I]Verify device database...[/I][/B]
[B][I]BuiltIn: 28 Custom: 0[/I][/B]
[B][I]Build device list... Ok[/I][/B]
[B][I]Scan 76 profiles... Ok[/I][/B]
[B][I]Init environment... Ok[/I][/B]
[B][I]Load IDBase v418494 Ok[/I][/B]
[B][/B]
[B][I]DA selected: 0_base | base_v1812 | MTK_AllInOne_DA.bin[/I][/B]
[B][/B]
[B][I]Operation: Identify Device [ v2.45 ][/I][/B]
[B][I]Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X[/I][/B]
[B][I]Mode: FLASH[/I][/B]
[B][I]Port: Both [ B + P ][/I][/B]
[B][I][+] Read Deep info: PRL, HW, DEBUG[/I][/B]
[B][I][+] Auto-EMI[/I][/B]
[B][I][+] FireFly UNI-Proto[/I][/B]
[B][I][+] Vendor-Specific Analyzer[/I][/B]
[B][I][-] Local SLA[/I][/B]
[B][I][-] Force BROM[/I][/B]
[B][I]Wait...[/I][/B]
[B][/B]
[B][I]1. Power Off the device[/I][/B]
[B][I]2. Wait 20 seconds[/I][/B]
[B][I]3. Connect USB cable to device [remember Vol+ | Vol-][/I][/B]
[B][I]Waiting for device connection...[/I][/B]
[B][/B]
[B][I]PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM10)[/I][/B]
[B][I]MODE [0]: PRELOADER PORT; PORT: 10[/I][/B]
[B][I]Waiting for BOOT ACK...[/I][/B]
[B][I]PRELOADER ACK Ok[/I][/B]
[B][I]BROM: Init... Ok[/I][/B]
[B][I]CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766[/I][/B]
[B][I] CODE: Cervino[/I][/B]
[B][I] TYPE: MODERN [RAPHAEL][/I][/B]
[B][I]BROM: Sec Level: 0x00000000 Mode: PLAIN[/I][/B]
[B][I] VER: 0xFF BL: 0x03 [PRELOADER PORT][/I][/B]
[B][I]AGENT: AUTO: 0_base: base_v1812[/I][/B]
[B][I] [8b87e966] C:\InfinityBox\CM2MT2\boot\0_base\base_v1812\MTK_AllInOne_DA.bin[/I][/B]
[B][I]Looking for suitable BootChain in DA...[/I][/B]
[B][I]Found MT6765[/I][/B]
[B][I]AGENT: MTK_DOWNLOAD_AGENT[/I][/B]
[B][I]BROM: Sending 1st DA...[/I][/B]
[B][I] DA sent[/I][/B]
[B][I]Jump to DA... Ok[/I][/B]
[B][I]DA: Sync...[/I][/B]
[B][I]DA: AGENT started[/I][/B]
[B][I]DA: SYNC[/I][/B]
[B][I] MODE: PRELOADER[/I][/B]
[B][I] EXT_RAM initialized[/I][/B]
[B][I]DA: Boot to 2nd DA...[/I][/B]
[B][I] 2nd stage confirmed[/I][/B]
[B][I]DA: SYNC passed[/I][/B]
[B][/B]
[B][I]Load HW info...[/I][/B]
[B][I]SRAM: 0x00040000 [ 256.00 Kb ][/I][/B]
[B][I]DRAM: 0x30000000 [ 768.00 Mb ][/I][/B]
[B][/B]
[B][I]EMMC CID: 150100474436424D420112209BD29501[/I][/B]
[B][I] VEN: Samsung OEM: 256 ID: 474436424D42 [GD6BMB] PRV: 0x01[/I][/B]
[B][I] SNN: 304126930 [0x12209BD2][/I][/B]
[B][I] MM/YY: 9/2018[/I][/B]
[B][I] BOOT1: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] BOOT2: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] RPMB: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] USER: 0x747C00000 [ 29.12 Gb ][/I][/B]
[B][/B]
[B][I]CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766[/I][/B]
[B][I] CODE: Cervino[/I][/B]
[B][I] TYPE: MODERN [RAPHAEL][/I][/B]
[B][I] RNID: 90B6104CB98D2EABDD576D9D92523E29[/I][/B]
[B][/B]
[B][I]USB: HIGH-SPEED[/I][/B]
[B][I]Boot done MODERN [RAPHAEL][/I][/B]
[B][/B]
[B][I]Analyze PMT...[/I][/B]
[B][I]Loaded 0x8000 bytes[/I][/B]
[B][I]PMT: PGPT [0x64] Records: 35[/I][/B]
[B][I]Select info source... Ok[/I][/B]
[B][I] Patch Level: O11019[/I][/B]
[B][I] Display ID: SP638_V11_20190122[/I][/B]
[B][I] SW Version: 1547692115[/I][/B]
[B][I] Ver. CodeName: REL[/I][/B]
[B][I] Ver. Release: 8.1.0[/I][/B]
[B][I] Sec. Patch: 2019-01-05[/I][/B]
[B][I] Build Time: 1/22/2019 2:17:22 AM[/I][/B]
[B][I] Product Model: Plume L3 Smart[/I][/B]
[B][I] Product Brand: Condor[/I][/B]
[B][I] Product Name: SP638[/I][/B]
[B][I] Product Device: SP638[/I][/B]
[B][I] CPU: arm64-v8a,armeabi-v7a,armeabi[/I][/B]
[B][I] CPU: armeabi-v7a,armeabi[/I][/B]
[B][I] CPU: arm64-v8a[/I][/B]
[B][I] Product Manfct: SPA Condor Electronics[/I][/B]
[B][I] Product Info: SP638[/I][/B]
[B][I] SW: SP638-user 8.1.0 O11019 1547692115 release-keys[/I][/B]
[B][I] Product Board: k62v1_64_bsp[/I][/B]
[B][I] Board Platform: mt6765[/I][/B]
[B][/B]
[B][I]Strategy: [none|generic][/I][/B]
[B][I]Firmware ID: MT6765_SPA_Condor_Electronics_Plume_L3_Smart_OSv8.1.0_SP638_V11_20190122_O11019_SP638[/I][/B]
[B][I]Verify firmware [MT6765_SPA_Condor_Electronics_Plume_L3_Smart_OSv8.1.0_SP638_V11_20190122_O11019_SP638]...[/I][/B]
[B][I]Firmware is unknown[/I][/B]
[B][I]Please upload https://infinity-box.com/?r=100020[/I][/B]
[B][/B]
[B][I]Analyze userdata...[/I][/B]
[B][I]userData: fileSystem [ext4] with FDE [forced encrypt][/I][/B]
[B][/B]
[B][I]Analyze modem...[/I][/B]
[B][I]TK_MD_BASIC_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V41[/I][/B]
[B][I]Analyze nvram...[/I][/B]
[B][I]NVRAM: Items: 0x9F Size: 0x08BE77 State: Ok[/I][/B]
[B][I] WiFi MAC: 000000000000[/I][/B]
[B][I] BlTh MAC: 000046000001[/I][/B]
[B][I] IMEI[1]: *******[/I][/B]
[B][I] IMEI[2]: *******[/I][/B]
[B][I]Verify device config...[/I][/B]
[B][I]Ok[/I][/B]
[B][I]Loaders Ok[/I][/B]
[B][I]Backup to C:\InfinityBox\CM2MT2\backup\MT6765__90B6104CB98D2EABDD576D9D92523E29\[/I][/B]
[B][I]Items to check: 20[/I][/B]
[B][I]Read [23] NVRAM[/I][/B]
[B][I]Read [8] NVDATA[/I][/B]
[B][I]Read [14] PROINFO[/I][/B]
[B][I]Read [24] LK[/I][/B]
[B][I]Read [7] NVCFG[/I][/B]
[B][I]Read [10] PROTECT1[/I][/B]
[B][I]Read [1] PGPT[/I][/B]
[B][I]Read [0] PRELOADER[/I][/B]
[B][I]Done 8 files[/I][/B]
[B][I]Compress: C:\InfinityBox\CM2MT2\backup\MT6765__90B6104CB98D2EABDD576D9D92523E29\[/I][/B]
[B][I]Cleanup...[/I][/B]
[B][I]Ok[/I][/B]
[B][I]Verify C:\InfinityBox\CM2MT2\backup\MT6765__90B6104CB98D2EABDD576D9D92523E29.7z[/I][/B]
[B][I]Verified[/I][/B]
[B][/B]
[B][I]STORAGE : Life Status : eMMC : NOT implemented in selected DA![/I][/B]
[B][I]STORAGE : OTP Status : NOT Enabled![/I][/B]
[B][I]STORAGE : RPMB Status : eMMC : RPMB KEY NOT PROGRAMMED [USABLE][/I][/B]
[B][/B]
[B][I]Analyze preloader...[/I][/B]
[B][I]EMI: MT6765 preloader_k62v1_64_bsp.bin with 1 memory type(s)[/I][/B]
[B][I] 1. eMMC DDR3 ID: 150100474436424D42 Ven: Samsung | Dev: GD6BMB RAM: 3.00 Gb[/I][/B]
[B][I]Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_k62v1_64_bsp.bin[/I][/B]
[B][I]Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_k62v1_64_bsp.bin [815d6e79]...[/I][/B]
[B][I]Exist[/I][/B]
[B][I]Done: 00:00:51[/I][/B]
[B][I]Reconnect Power/Cable now[/I][/B]
[B][/B]
[B][/B]
[B][I]Operation: Reset Settings/Format FS [ v2.45 ][/I][/B]
[B][I]Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X[/I][/B]
[B][I]Format: SMART RESET[/I][/B]
[B][I]Wait...[/I][/B]
[B][I]WARNING: Format FS WILL RESET ALL USER DATA! [/I][/B]
[B][I]Make sure about correct format mode selection![/I][/B]
[B][I]Continue? Yes[/I][/B]
[B][I]1. Power Off the device[/I][/B]
[B][I]2. Wait 20 seconds[/I][/B]
[B][I]3. Connect USB cable to device [remember Vol+ | Vol-][/I][/B]
[B][I]Waiting for device connection...[/I][/B]
[B][/B]
[B][I]PTFN: MediaTek PreLoader USB VCOM_V1633 (Android) (COM10)[/I][/B]
[B][I]MODE [0]: PRELOADER PORT; PORT: 10[/I][/B]
[B][I]Waiting for BOOT ACK...[/I][/B]
[B][I]PRELOADER ACK Ok[/I][/B]
[B][I]BROM: Init... Ok[/I][/B]
[B][I]CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766[/I][/B]
[B][I] CODE: Cervino[/I][/B]
[B][I] TYPE: MODERN [RAPHAEL][/I][/B]
[B][I]BROM: Sec Level: 0x00000000 Mode: PLAIN[/I][/B]
[B][I] VER: 0xFF BL: 0x03 [PRELOADER PORT][/I][/B]
[B][I]AGENT: AUTO: 0_base: base_v1812[/I][/B]
[B][I] [8b87e966] C:\InfinityBox\CM2MT2\boot\0_base\base_v1812\MTK_AllInOne_DA.bin[/I][/B]
[B][I]Looking for suitable BootChain in DA...[/I][/B]
[B][I]Found MT6765[/I][/B]
[B][I]AGENT: MTK_DOWNLOAD_AGENT[/I][/B]
[B][I]BROM: Sending 1st DA...[/I][/B]
[B][I] DA sent[/I][/B]
[B][I]Jump to DA... Ok[/I][/B]
[B][I]DA: Sync...[/I][/B]
[B][I]DA: AGENT started[/I][/B]
[B][I]DA: SYNC[/I][/B]
[B][I] MODE: PRELOADER[/I][/B]
[B][I] EXT_RAM initialized[/I][/B]
[B][I]DA: Boot to 2nd DA...[/I][/B]
[B][I] 2nd stage confirmed[/I][/B]
[B][I]DA: SYNC passed[/I][/B]
[B][/B]
[B][I]Load HW info...[/I][/B]
[B][I]SRAM: 0x00040000 [ 256.00 Kb ][/I][/B]
[B][I]DRAM: 0x30000000 [ 768.00 Mb ][/I][/B]
[B][/B]
[B][I]EMMC CID: 150100474436424D420112209BD29501[/I][/B]
[B][I] VEN: Samsung OEM: 256 ID: 474436424D42 [GD6BMB] PRV: 0x01[/I][/B]
[B][I] SNN: 304126930 [0x12209BD2][/I][/B]
[B][I] MM/YY: 9/2018[/I][/B]
[B][I] BOOT1: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] BOOT2: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] RPMB: 0x00400000 [ 4.00 Mb ][/I][/B]
[B][I] USER: 0x747C00000 [ 29.12 Gb ][/I][/B]
[B][/B]
[B][I]CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766[/I][/B]
[B][I] CODE: Cervino[/I][/B]
[B][I] TYPE: MODERN [RAPHAEL][/I][/B]
[B][I] RNID: 90B6104CB98D2EABDD576D9D92523E29[/I][/B]
[B][/B]
[B][I]USB: HIGH-SPEED[/I][/B]
[B][I]Boot done MODERN [RAPHAEL][/I][/B]
[B][/B]
[B][I]Analyze PMT...[/I][/B]
[B][I]Loaded 0x8000 bytes[/I][/B]
[B][I]PMT: PGPT [0x64] Records: 35[/I][/B]
[B][I]Select info source... Ok[/I][/B]
[B][I] Patch Level: O11019[/I][/B]
[B][I] Display ID: SP638_V11_20190122[/I][/B]
[B][I] SW Version: 1547692115[/I][/B]
[B][I] Ver. CodeName: REL[/I][/B]
[B][I] Ver. Release: 8.1.0[/I][/B]
[B][I] Sec. Patch: 2019-01-05[/I][/B]
[B][I] Build Time: 1/22/2019 2:17:22 AM[/I][/B]
[B][I] Product Model: Plume L3 Smart[/I][/B]
[B][I] Product Brand: Condor[/I][/B]
[B][I] Product Name: SP638[/I][/B]
[B][I] Product Device: SP638[/I][/B]
[B][I] CPU: arm64-v8a,armeabi-v7a,armeabi[/I][/B]
[B][I] CPU: armeabi-v7a,armeabi[/I][/B]
[B][I] CPU: arm64-v8a[/I][/B]
[B][I] Product Manfct: SPA Condor Electronics[/I][/B]
[B][I] Product Info: SP638[/I][/B]
[B][I] SW: SP638-user 8.1.0 O11019 1547692115 release-keys[/I][/B]
[B][I] Product Board: k62v1_64_bsp[/I][/B]
[B][I] Board Platform: mt6765[/I][/B]
[B][I]Strategy: [none|generic][/I][/B]
[B][I]SmartInfo: Android Ver: 8 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+][/I][/B]
[B][/B]
[B][I]Verify device config...[/I][/B]
[B][I]Ok[/I][/B]
[B][I]Loaders Ok[/I][/B]
[B][I]Backup exist: C:\InfinityBox\CM2MT2\backup\MT6765__90B6104CB98D2EABDD576D9D92523E29[/I][/B]
[B][I]Stage a: SMART RESET[/I][/B]
[B][I][1] Process RESET PROTECTION... Ok[/I][/B]
[B][I][2] Process USERDATA... Ok[/I][/B]
[B][I][3] Process CACHE... Ok[/I][/B]
[B][I][4] Verified[/I][/B]
[B][I][5] Verified[/I][/B]
[B][I][6] Process USERDATA... Ok[/I][/B]
[B][I][7] Verified[/I][/B]
[B][I]Stage b: SMART RESET[/I][/B]
[B][I][1] Verified[/I][/B]
[B][I][2] Verified[/I][/B]
[B][I]Stage c: SMART RESET[/I][/B]
[B][I]Stage d: SMART RESET[/I][/B]
[B][I]Done: 00:00:29[/I][/B]
[B][I]Reconnect Power/Cable now[/I][/B]رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة
OPPO -A16K-[CPH2349]-FRP-SMART RESET
\
\
كود:
Operation: Identify Device [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: BROM Only
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Vendor-Specific Analyzer
[+] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: EFD6CDEA55A3DE809CA25B8CAD3181482931E8341E31B4DFBA084751E6D447EE
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
FF: Looking for EMI Not Found
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\base_v2112\MTK_AllInOne_DA.2021-07-12.0656ff20.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
EMI: Init [0] via Internal database
EMI: Init Ok
EMI: INFINITY PRELOADER_INFINITY_0 with 4 memory type(s)
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed
Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: 6BFDFCD557885E160DF204E703A9A76F
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
EMI settings has been stored.
Connect device again with the same operation!
Another way <a href="https://infinity-box.com/?r=100233">see here</a>
Done: 00:00:50
Reconnect Power/Cable now
Operation: Reset Settings/Format FS [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Reset may clear ALL USER DATA!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init...
Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
- Try again
Reconnect Power/Cable now
Operation: Identify Device [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init...
Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
- Try again
Reconnect Power/Cable now
Operation: Identify Device [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init...
Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
- Try again
Reconnect Power/Cable now
Operation: Identify Device [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: EFD6CDEA55A3DE809CA25B8CAD3181482931E8341E31B4DFBA084751E6D447EE
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
FF: Looking for EMI Not Found
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\base_v2112\MTK_AllInOne_DA.2021-07-12.0656ff20.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC with DA FAIL
Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
- Try again
Reconnect Power/Cable now
DA selected: 0_base | base_v2112 | DA_PL.2021-03-21.545cd3be.bin
Operation: Identify Device [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: EFD6CDEA55A3DE809CA25B8CAD3181482931E8341E31B4DFBA084751E6D447EE
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
FF: Looking for EMI Not Found
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[545cd3be] C:\InfinityBox\CM2MT2\boot\0_base\base_v2112\DA_PL.2021-03-21.545cd3be.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
EMI: Init [0] via Internal database
EMI: Init Ok
EMI: INFINITY PRELOADER_INFINITY_0 with 4 memory type(s)
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed
Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: 6BFDFCD557885E160DF204E703A9A76F
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 48
Select info source...
Analyze userdata...
userData: fileSystem : [f2fs] with FBE [file based encryption]
Analyze modem...
OPPO6765_21281_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_TC16_SP_V3_P22
Analyze nvram...
NVRAM: Items: 0xA9 Size: 0x08F94F State: Ok
WiFi MAC: AA0036004400
BlTh MAC: 9C7403651E76
Verify device config...
Ok
Loaders Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6765__B979C2C8A3DEB2AB517F3E765F6DDC80\
Items to check: 20
Read [35] NVRAM
Read [14] NVDATA
Read [22] PROINFO
Read [36] LK
Read [13] NVCFG
Read [17] PROTECT1
Read [1] PGPT
Read [20] PERSIST
Read [0] PRELOADER
Read [7] OPPORESERVE3
ZERO CONTENT file [64.00 Mb] deleted: C:\InfinityBox\CM2MT2\backup\MT6765__B979C2C8A3DEB2AB517F3E765F6DDC80\opporeserve3.bin
Read [8] OPPO_CUSTOM
Read [23] OCDT
Read [26] CDT_ENGINEERING
Done 12 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6765__B979C2C8A3DEB2AB517F3E765F6DDC80\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6765__B979C2C8A3DEB2AB517F3E765F6DDC80.7z
Finished
STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY PROGRAMMED [UNUSABLE]
Analyze preloader...
EMI: MT6765 preloader_oppo6765.bin with 5 memory type(s)
1. eMMC LP_DDR4X ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
3. eMMC LP_DDR4X ID: 90014A68433861503E Hynix hC8aP> RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 150100445036444242 Samsung DP6DBB RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100445836384D42 Samsung DX68MB RAM: 3.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6765.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6765.bin [a1b24a0e]...
Exist
Done: 00:01:14
Reconnect Power/Cable now
Operation: Reset Settings/Format FS [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Reset may clear ALL USER DATA!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init...
Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
- Try again
Reconnect Power/Cable now
Operation: Reset Settings/Format FS [ v2.47 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: SMART RESET
Wait...
WARNING: Reset may clear ALL USER DATA!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM3)
MODE [0]: BOOTROM; PORT: 3
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: EFD6CDEA55A3DE809CA25B8CAD3181482931E8341E31B4DFBA084751E6D447EE
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
FF: Looking for EMI Not Found
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2112
[545cd3be] C:\InfinityBox\CM2MT2\boot\0_base\base_v2112\DA_PL.2021-03-21.545cd3be.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
EMI: Init [0] via Internal database
EMI: Init Ok
EMI: INFINITY PRELOADER_INFINITY_0 with 4 memory type(s)
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed
Load HW info...
RAM: SRAM: 0x0003A000 [ 232.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: 90014A68433861503E03105129C3987D
Ven: Hynix OEM: 330 ID: 68433861503E [hC8aP>] PRV: 0x03
SNN: 273754563 [0x105129C3]
MM/YY: 9/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: 6BFDFCD557885E160DF204E703A9A76F
MEID: B979C2C8A3DEB2AB517F3E765F6DDC80
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 48
Select info source...
Strategy: [none|generic]
SmartInfo: Android Ver: 11 UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Verify device config...
Ok
Loaders Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6765__B979C2C8A3DEB2AB517F3E765F6DDC80
Stage: ANDROID OS
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Process USERDATA... Ok
Stage: FRP
Stage: SMART
Done: 00:00:38
Reconnect Power/Cable now- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
ITEL A56 (W6004) Reset Settings + FRP
ITEL A56 (W6004) Reset Settings + FRP
كود:
Operation : Format FS / Reset Settings [ v2.14 ]Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : iTel : A56-W6004-SP591 [2]
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0006
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0001
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:58- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
LOGICOM LA TAB 74 Remove FRP
كود:
Card found : 0E*****A , v0151
Infinity-Box RockChip Service Tool [RKT] v2.02
Operation : Reset Settings [ v2.02 ]
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Device mode : 0x0006
SoC CPU : 312A
Flash CSx : 0x00
Flash Type : 2C84643CA9 [ NAND ]
Flash Vend : MICRON
Flash Size : 0x0000000400000000 ( 16.00 GiB )
Flash Info : 8388608/16384/32/40/1
Connect Ok!
Remove FRP 0 ...
FRP removed!
Wiping UserData ...
Wipe DATA Ok!
Done!
Elapsed: 00:00:11- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Xiaomi Redmi 9A (M2006C3LG) FRP Reset
كود:
Operation: Reset Settings/Format FS [ v2.72 ]
WARNING: Reset may delete ALL USER DATA!
Wipe Off; Userdata Off; FRP On; Accounts Off; Smart Analyzer On
Wait...
Connection: Boot [FF] FireFly
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; Local SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
PTFN: MediaTek USB Port (COM281)
MODE: BOOTROM; PORT: 281
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
Code: Cervino
Type: MODERN [RAPHAEL]
MEID: C9EF476086656FE35CE187F921F34C77
BROM: Sec Level: 0x000000E7; Mode: SBC+SLA+SDA+EXT
Ver: 0x05 BL: 0xFE [BOOTROM]
SOCID: 09A60605A6F4F878972EA44C81591D8ACEF88CBF6C3A925BD64824B6833C58A4
[FF] Init
Start Auth... Ok
Continue Auth... Ok
Start... Ok
Init Core... Ok
FireFly: Running: v06.05.06 on MT6765
EMMC init passed
extcsd stored: C:\InfinityBox\CM2MT2\backup\ext_csd\MT6765__extcsd_0045-Sandisk_DA4064_5.1_2024-10-22.bin
EMMC CID: 45010044413430363401C26AF84519E5 crc Ok
Vendor: Sandisk OEM: 256 ID: 444134303634 [DA4064] PRV: 0x01
Serial: 3261790277 0xC26AF845
MM/YY: 1/2022
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CSD: D00F00328F5903FFFFFFFFEF8A404023
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
EXTCSD rev1.8 EMMC 5.1 FW:
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x02
PARTITION_CONFIG: 0x48
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 64 Gb Actual 0xE8F800000 58.24 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
Boot done MODERN [RAPHAEL] 7 min 17 sec
Analyze PMT... Ok
Partition table: PGPT [0x64] with 43 records
Probe boot... Ok 9 sec
AndroidInfo: recovery;gzip;bootimage|loaded ramsidk size 0xBE34A6|15C6000;
SW: Redmi/dandelion_global/dandelion:11/RP1A.200720.011/V12.5.6.0.RCDMIXM:user/release-keys
Product Brand: Redmi
Product Device: dandelion
Product Model: M2006C3LG
Product Name: dandelion_global
Market Name: Redmi 9A
Patch Level: RP1A.200720.011
Display ID: RP1A.200720.011
SW Version: V12.5.6.0.RCDMIXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-07-01
Build Time: 7/27/2022 1:08:32 PM
CPU: armeabi-v7a,armeabi
Product Info: dandelion
SW: dandelion-user 11 RP1A.200720.011 V12.5.6.0.RCDMIXM release-keys
Product Manfct: Xiaomi
Product Board: dandelion
Board Platform: mt6765
Device ID: xiaomi-m2006c3lg-dandelion-dandelion-global-redmi-9a
Strategy: [xiaomi]
Firmware ID: MT6765_Xiaomi_M2006C3LG_OSv11_V12.5.6.0.RCDMIXM_RP1A.200720.011_dandelion_Redmi
Android ver: 11
UserDataFS: 0x03 [f2fs] CacheFS: 0x02 [ext4|8+]
Backup 23 items to C:\InfinityBox\CM2MT2\backup\MT6765__C9EF476086656FE35CE187F921F34C77\
Read [31] nvram Ok 49 sec
Read [13] nvdata Ok 49 sec
Read [21] proinfo Ok 2 sec
Read [32] lk Ok 1 sec lk [b174c73d]
Read [12] nvcfg Ok 24 sec
Read [16] protect1 Ok 6 sec
Read [1] pgpt Ok 47 us
Read [19] persist Ok 37 sec
Read [0] preloader Ok 3 sec
Done 9 files 2 min 55 sec
Compress: C:\InfinityBox\CM2MT2\backup\MT6765__C9EF476086656FE35CE187F921F34C77\ Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6765__C9EF476086656FE35CE187F921F34C77.7z Enough [xiaomi-m2006c3lg-dandelion-dandelion-global-redmi-9a]
Stage: Android OS Off
Stage: FRP...
process [frp]... Ok
Completed
Stage: Vendor... Noting for [xiaomi]
If FRP still active after reset, set [Userdata] On and make reset again
Reset port...
Trying to reboot...
Finished 11 min 46 sec- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Condor Griffe T9 Plus Reset FRP
كود:
CM2 - SP3 Service Tool v2.30
probe UAC... Ok
Wait...
S/N: ********** v0163
initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Check for updates [CM2SP3]...
You have latest version [2.30] installed
Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: https://infinity-box.com/buy/
Account: https://infinity-box.com/service/
Get list of devices... Ok
Loaded 2 new of 1630 devices
Build device list... Ok 1638
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Condor/Griffe-T9-plus
Install... Ok
Get loader info... Ok
Finished 1 min 35 sec
Selected: Condor Griffe-T9-plus Boot [FF] FireFly nor
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory
Operation: Connect Condor Griffe-T9-plus Boot [FF] FireFly [v2.30]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) vid 0x1782 pid 0x4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec Ok
Dev UID: 91af57f96ceb8c263c54343be906b946732a320fe6023d690bc07951debe8be7
stored 6 hwid cache items
get storage info... MMC
EMMC CID: 70010054423238313620125F5371465D crc Ok
Vendor: Kingston OEM: 256 ID: 544232383136 [TB2816] PRV: 0x20
Serial: 308237169 0x125F5371
MM/YY: 4/2019
CSD: D04F01320F5903FFFFFFFFEF8A400001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 20
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 16 Gb Actual 0x3A8000000 14.63 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: End of Life (READ-ONLY)
EOL_B: MLC status: End of Life (READ-ONLY)
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_91af57f96ceb8c26_extcsd_0070-Kingston_TB2816_5.1_2024-11-09.bin
get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 38
Connected
get sw info... 4 sec
Patch Level: PPR1.180610.011
Display ID: SP647_V9.0_20190511
SW: SP647_V9.0_20190511
SW Version: 14510
Ver. CodeName: REL
Ver. Release: 9
Sec. Patch: 2019-04-01
Build Time: 5/13/2019 6:57:19 AM
Product Model: Griffe T9 Plus
Product Brand: Condor
Product Name: Griffe_T9_Plus
Product Device: Griffe_T9_Plus
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Manfct: SPA Condor Electronics
Product Info: Griffe_T9_Plus
Product Board: sp9863a_1h10
Board Platform: sp9863a
Android ver: 9
UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]
Device ID: spa-condor-electronics-griffe-t9-plus-sp9863a-1h10
Strategy: [none|generic]
Firmware ID: SP9863A_SPA_Condor_Electronics_Griffe_T9_Plus_OSv9_SP647_V9.0_20190511_PPR1.180610.011_Griffe_T9_Plus
Backup 7 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_91af57f96ceb8c26\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_91af57f96ceb8c26\
Reading...
Read [1/38] prodnv 5.00 Mb Ok
Read [2/38] miscdata 1024.00 Kb Ok
Read [10/38] uboot_bak 1024.00 Kb Ok
Read [14/38] l_fixnv1 2.00 Mb Ok
Read [15/38] l_fixnv2 2.00 Mb Ok
Read [37/38] splloader 4.00 Mb Ok
Read [38/38] splloader_bak 4.00 Mb Ok
Saved 7 of 7 images. 19.00 Mb of 19.00 Mb
Done 7 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_91af57f96ceb8c26\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_91af57f96ceb8c26.7z Verified [f4621b3a]
[MemTool] load 38 items
Finished 53 sec
Operation: Reset | Format Condor Griffe-T9-plus Boot [FF] FireFly [v2.30]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[+] Smart
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Partitions: 38
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_91af57f96ceb8c26\
Process FRP...
Looking for items... 1 items found
[1] Writing... Ok
Process nvram...
[16] Format... Ok
[17] Format... Ok
Completed
Finished 15 sec- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Realme Note 50 (RMX3834) Unlock Network
كود:
CM2 - SP3 Service Tool v2.30
probe UAC... Ok
Wait...
S/N: 030******* v0163
initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Build device list... Ok 1638
Ready
Selected: SoC T612 Boot [FF] FireFly
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory
Operation: Connect SoC T612 Boot [FF] FireFly [v2.30]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) vid 0x1782 pid 0x4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec Ok
Dev UID: 803216fe49046811f2141dd0f68a6e0460d1da527417fa97d400539ccca8d29d
stored 6 hwid cache items
get storage info... MMC
EMMC CID: F4012241524A3431581033381C943B87 crc Ok
Vendor: Biwin OEM: 290 ID: 41524A343158 [ARJ41X] PRV: 0x10
Serial: 859315348 0x33381C94
MM/YY: 3/2024
CSD: D02701328F5903FFFFFFFFFF8A404001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x20 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x1000000 16.00 Mb
Size: Market 128 Gb Actual 0x1CD0000000 115.25 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_803216fe49046811_extcsd_00F4-Biwin_ARJ41X_5.1_2024-11-12.bin
get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 79
Connected
get sw info... 24 sec
Product Brand: realme
Product Device: RE5C9F
Product Model: ums9230_hulk_Natv
Product Name: RMX3834
SW OTA Version: RMX3834export_14.C.62_3620_202409092136
SW: realme/RMX3834/RE5C9F:13/TP1A.220624.014/T.R4T2.1725890314:user/release-keys
Patch Level: TP1A.220624.014
Display ID: RMX3834export_14_C.62
SW Version: 315
Ver. CodeName: REL
Ver. Release: 13
Sec. Patch: 2023-11-05
Build Time: 9/9/2024 2:31:31 PM
Product Info: ums9230_hulk
SW: ums9230_hulk_Natv-user 13 TP1A.220624.014 315 release-keys
Product Manfct: realme
Board Platform: ums9230
Product Board: ums9230_hulk
Android ver: 13
UserDataFS: 0x03 [f2fs] CacheFS: 0x03 [f2fs]
Device ID: realme-ums9230-hulk-natv-re5c9f-rmx3834
Strategy: [oppo]
Firmware ID: UMS9230_realme_ums9230_hulk_Natv_OSv13_RMX3834export_14_C.62_TP1A.220624.014_ums9230_hulk
Backup exist: C:\InfinityBox\CM2SP3\backup\ums9230_803216fe49046811\
get slots... slot: a
[MemTool] load 79 items
Finished 48 sec- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
Realme C25y (RMX3265) Format Userdata & Reset FRP
كود:
CM2 - SP3 Service Tool v2.32
probe UAC... Ok
Wait...
S/N: 03*******A v0163
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Check for updates [CM2SP3]...
You have latest version [2.32] installed
Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: https://infinity-box.com/buy/
Account: https://infinity-box.com/service/
Get list of devices... Ok
Loaded 0 new of 1630 devices
Build device list... Ok 1639
Ready
Selected: Realme C11-2021 Boot [FF] FireFly mmc
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Realme/C25y
Install... Ok
Get loader info... Ok
Get loader info... Ok
Finished 1 min 9 sec
Selected: Realme C25y Boot [FF] FireFly mmc
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory
Operation: Connect Realme C25y Boot [FF] FireFly [v2.32]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 3a2cf47a5c600dffd5650059a316db62c4d9b9914afa631125b81bed573926ca
stored 6 hwid cache items
get storage info... MMC
EMMC CID: 1501004456364441420235DDD3C9A899 crc Ok
Vendor: Samsung OEM: 256 ID: 445636444142 [DV6DAB] PRV: 0x02
Serial: 903730121 0x35DDD3C9
MM/YY: 10/2021
CSD: D02701320F5903FFF6DBFFEF8E404001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 02
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x1000000 16.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 128 Gb Actual 0x1D1EC00000 116.48 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_3a2cf47a5c600dff_extcsd_0015-Samsung_DV6DAB_5.1_2024-11-18.bin
get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 78
Connected
Partitions: 78
get sw info...
AndroidInfo: vendor_boot_a;ramdisk size=0;boot_a;gzip;bootimage/loaded ramsidk size 0x8BFEC9/1417F00; 5 sec
SW: realme/RMX3265/RE54D1:11/RP1A.201005.001/1685617956000:user/release-keys
Product Brand: realme
Product Device: RE54D1
Product Model: RMX3265
Product Name: RMX3265
Patch Level: RP1A.201005.001
Display ID: RMX3265_11_A.49
SW Version: 1685617956000
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2023-06-05
Build Time: 6/1/2023 11:11:30 AM
SW OTA Version: RMX3265_11_A.49_20230601175252
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: RMX3265
SW: RMX3265_ctcc-user 11 RP1A.201005.001 22419 release-keys
Product Board: ums512
Board Platform: ums512
Product Manfct: realme
Android ver: 11
UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]
Device ID: realme-rmx3265-re54d1-ums512
Strategy: [realme]
Firmware ID: UMS512_realme_RMX3265_OSv11_RMX3265_11_A.49_RP1A.201005.001_RMX3265
Backup 10 items to: C:\InfinityBox\CM2SP3\backup\ums512_3a2cf47a5c600dff\
Read to C:\InfinityBox\CM2SP3\backup\ums512_3a2cf47a5c600dff\
Reading...
Read [1/78] prodnv 10.00 Mb Ok
Read [2/78] miscdata 1024.00 Kb Ok
Read [8/78] uboot_a 1024.00 Kb Ok
Read [9/78] uboot_b 1024.00 Kb Ok
Read [13/78] l_fixnv1_a 2.00 Mb Ok
Read [14/78] l_fixnv2_a 2.00 Mb Ok
Read [15/78] l_fixnv1_b 2.00 Mb Ok
Read [16/78] l_fixnv2_b 2.00 Mb Ok
Read [77/78] splloader 4.00 Mb Ok
Read [78/78] splloader_bak 4.00 Mb Ok
Saved 10 of 10 images. 29.00 Mb of 29.00 Mb
Done 10 files
Compress: C:\InfinityBox\CM2SP3\backup\ums512_3a2cf47a5c600dff\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\ums512_3a2cf47a5c600dff.7z Verified [908b944b]
get slots... slot: a
Probe bootloader...
Method: known(3) known(1) b=>a
Bootloader state: Empty [untouched]
[MemTool] load 78 items
Finished 1 min 6 sec
Operation: Reset | Format Realme C25y Boot [FF] FireFly [v2.32]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[+] Wipe
[+] Userdata
[+] FRP
[-] nvram
Wait...
Partitions: 78
Backup exist: C:\InfinityBox\CM2SP3\backup\ums512_3a2cf47a5c600dff\
Process Wipe...
Reading... Ok
Writing... Ok
Process FRP...
Looking for items... 1 items found
[1] Writing... Ok
Process Userdata...
[1] Format... Ok 4 sec
[2] Format... Ok 3 sec
[3] Format... Ok 516 us
Completed
Finished 16 sec
Reboot... Disconnect cable if it freez
CMD 0x05 0x8E PHONE_WAIT_INPUT_TIMEOUT
Bye- إنضم
- 16 سبتمبر 2012
- المشاركات
- 3,397
- مستوى التفاعل
- 3,153
- النقاط
- 113
iTel A70 (A665L) FRP Reset
كود:
CM2 - SP3 Service Tool v2.32
probe UAC... Ok
Wait...
S/N: 03*******A v0163
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Build device list... Ok 1639
Ready
Select SoC/Device or [Get boot files]
Selected: iTel A70 Boot [FF] FireFly mmc
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory
Operation: Connect iTel A70 Boot [FF] FireFly [v2.32]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
Handshake fail
Wrong connection mode?
Canceled
Finished 14 sec
Operation: Connect iTel A70 Boot [FF] FireFly [v2.32]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 76cc7411585778810294d4ef0eef036f22f5832b945b668e67f1b7a8a7c3e8d2
stored 6 hwid cache items
get storage info... MMC
EMMC CID: D62D004D4D4331323851205964091B97 crc Ok
Vendor: Foresee OEM: 11520 ID: 4D4D43313238 [MMC128] PRV: 0x51
Serial: 542729225 0x20596409
MM/YY: 1/2024
CSD: D04F01328F5903FFFFFFFFEF8A400001
temp_write_protect: False
perm_write_protect: False
wp_group: 0x10 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 04
ERASE_GROUP_DEF: 0x0400
BOOT_BUS_WIDTH: 0x00
PARTITION_CONFIG: 0x08
RST_N_FUNCTION: 0x01
PART_S_COMPLETED: False
BOOT size: 0x400000
RPMB size: 0x400000 4.00 Mb
WP_GRP_SIZE: 0x800000 8.00 Mb
Size: Market 128 Gb Actual 0x1D20500000 116.50 Gb
EOL: Status: Normal: Less than 80% reserved blocks used
EOL_A: SLC status: 0% - 10% used
EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_76cc741158577881_extcsd_00D6-Foresee_MMC128_5.1_2024-11-19.bin
get partitions...
Load primary GPT...
Load secondary GPT...
Primary GPT state Ok
Secondary GPT state Ok
Partitions: 68
Connected
Partitions: 68
get sw info...
AndroidInfo: vendor_boot_a;lz4;bootimage/loaded ramsidk size 0x1653A88/3279700; 14 sec
Product Brand: Itel
Product Device: itel-A665L
Product Model: itel A665L
Product Name: A665L
SW: Itel/A665L-OP/itel-A665L:13/TP1A.220624.014/240522V1482:user/release-keys
Market Name: itel A70
Patch Level: TP1A.220624.014
Display ID: A665L-SE673SBCEFHJKLMNOPQRSTUVWX-TGo-OP-240522V1482
Product Name: A665L-OP
Ver. CodeName: REL
Ver. Release: 13
Sec. Patch: 2024-05-05
Build Time: 5/22/2024 3:30:28 AM
Product Info: A665L
SW: A665L-user 13 TP1A.220624.014 628 release-keys
SW Version: 240522V1482
Product Manfct: ITEL
Board Platform: sp9863a
Product Board: itel-A665L
Android ver: 13
UserDataFS: 0x03 [f2fs] CacheFS: 0x03 [f2fs]
Device ID: itel-a665l-a665l-op-itel-a70
Strategy: [itel]
Firmware ID: SP9863A_ITEL_itel_A665L_OSv13_A665L-SE673SBCEFHJKLMNOPQRSTUVWX-TGo-OP-240522V1482_TP1A.220624.014_A665L_Itel
Backup 11 items to: C:\InfinityBox\CM2SP3\backup\sp9863a_76cc741158577881\
Read to C:\InfinityBox\CM2SP3\backup\sp9863a_76cc741158577881\
Reading...
Read [1/68] prodnv 64.00 Mb Ok
Read [2/68] miscdata 1024.00 Kb Ok
Read [8/68] uboot_a 3.00 Mb Ok
Read [9/68] uboot_b 3.00 Mb Ok
Read [13/68] l_fixnv1_a 2.00 Mb Ok
Read [14/68] l_fixnv2_a 2.00 Mb Ok
Read [15/68] l_fixnv1_b 2.00 Mb Ok
Read [16/68] l_fixnv2_b 2.00 Mb Ok
Read [65/68] calinv 2.00 Mb Ok
Read [67/68] splloader 4.00 Mb Ok
Read [68/68] splloader_bak 4.00 Mb Ok
Saved 11 of 11 images. 89.00 Mb of 89.00 Mb
Done 11 files
Compress: C:\InfinityBox\CM2SP3\backup\sp9863a_76cc741158577881\
Cleanup...
Ok
Verify C:\InfinityBox\CM2SP3\backup\sp9863a_76cc741158577881.7z Verified [a8d90b86]
get slots... slot: a
Probe bootloader...
Method: default(0) known(1) a
Verify [BL] data... Ok
Bootloader state: Empty [untouched]
[MemTool] load 68 items
Finished 2 min 42 sec
Operation: Reset | Format iTel A70 Boot [FF] FireFly [v2.32]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[-] Wipe
[-] Userdata
[+] FRP
[-] nvram
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
Partitions: 68
Backup exist: C:\InfinityBox\CM2SP3\backup\sp9863a_76cc741158577881\
Process FRP...
Looking for items... 1 items found
[1] Writing... Ok
Finished 11 sec
