تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة فوق

Condor Allure M1 Plus FRP Reset

Condor Allure M1 Plus FRP Reset

1649489992261.png


16494899926072.png

كود:
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.32

Load IDBase v1121431 Ok!


UserName and/or Password not set! Can't continue!


Load IDBase v1121431 Ok!


Operation : Reset Settings/Format FS [ v2.32 ]


Mode : FRP [ RESET PROTECTION ]


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
     CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     CODE : Kibo
     TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6757
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info


        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]


        EMMC: CID : 150100444836444D4205801BAC8D547D
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444D42
        EMMC: VEN : SAMSUNG : DH6DMB
        EMMC: SNN : 2149297293 ( 0x801BAC8D) , MF : 5/2017


        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]


        CHIP : MT6757 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000


        RNID : 5E86CCB8FAFED4454D81360E22344443


DA : USB : HIGH-SPEED


Boot done!


[COLOR=#ff0000]Format Ok : RESET PROTECTION[/COLOR]


Done!
Elapsed: 00:00:26


Reconnect Power/Cable!
 
Wiko Y62 w-k610 FULL FACTORY ( WIPE + FRP )

Wiko Y62 w-k610 FULL FACTORY ( WIPE + FRP )

165009952345041.png


165009952355742.png

كود:
Operation : Reset Settings/Format FS [ v2.32 ]

Mode : FULL FACTORY ( WIPE + FRP )


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


PTFN : MediaTek USB Port_V1633 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 76A62BE2B40517FAA4597C24AF9A3A3C
BROM : SecLevel : 0x000000E1
BROM : SecMode  : SBC+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 985D3654B09EEDC06D7D2D42720CA564C6947A36C739E3EEC523D839AC81C4D7
BROM : EMI : Search
BROM : EMI : Found!
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k610.bin
     EMI : CNT : 0006
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info


        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]


        EMMC: CID : F40122426977696E204A9294A41698BF
        EMMC: VEN : BIWIN : OEM : 34 : ID : 426977696E20
        EMMC: VEN : BIWIN : Biwin 
        EMMC: SNN : 2459214870 ( 0x9294A416) , MF : 9/2021


        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A4000000 [ 14.56 GB ]


        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000


        RNID : 47C6D106CBF12DA3F00D726E97A0F9F1


DA : USB : HIGH-SPEED


Boot done!


[COLOR=#ff0000]Format Ok : RESET PROTECTION[/COLOR]
[COLOR=#ff0000]Format Ok : USERDATA[/COLOR]
[COLOR=#ff0000]Format Ok : USERDATA[/COLOR]


Done!
Elapsed: 00:00:38


Reconnect Power/Cable!
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

QILIVE Q7T7INK FACTORY RESET DONE

VOL+ + USB CABLE





 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

LENOVO- A319- FLASH DONE
p_23313q7w61.png
p_23319i9k82.png
 
ACE ZIP 2 mini (af0119) Format UserData

ACE ZIP 2 mini (af0119) Format UserData

165458626922171.png

كود:
Card found : 0000000 , v0151Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.07


SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]




SPRD mode : SC6531 : REV : E000 : NOR : [ 4MB ]


BINARY : SC6531EFM_BAR.bin
FLSIZE : 0x00400000
Project Version:   SC6531EFM_BAR
MMI Version:       SC6531EFM_BAR
HW Version:        SC6531EFM_BAR
Load Ok!


Operation : Write Flash [ v1.07 ]


1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!


Wait for device ... 


Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!


Boot Done!


BIN : Format UserData
BIN : Format UserData Ok!


Done!
Elapsed: 00:01:57


Reconnect Power/Cable!
 
C idea Cm495 Read Pattern Lock

C idea Cm495 Read Pattern Lock


16545867296641.png
 
Starlight M06 Read User Code

Starlight M06 Read User Code

165679049346271.png
 
Cidea cm830 Read Pattern Lock

Cidea cm830 Read Pattern Lock

165679076893411.png


165679076905542.png

كود:
Card found : S/N : 0000000 , v0151Chinese Miracle II  [MTK module] v 1.57


Operation : Read Pattern/DP Lock [ v1.57 ]


1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey


Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : EA010E5350654D4D4310C321266B2831
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xEA , OEM : 010E
[eMMC] : FLASH_INF : [NOT_IN_BASE] , CMMeP
[eMMC] : FLASH_CID : EA010E5350654D4D4310C321266B2831
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x76D4B06841D63F92855AA6E6D83E0A8F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Reading data ... 


Get Locks ...
[COLOR=#ff0000]PatternLock Sequnce : 625398[/COLOR]


Done!
Elapsed: 00:00:23
Reconnect Power/Cable!
 
Starlight VENUS PLUS Read Firmware

Starlight VENUS PLUS Read Firmware

165700765074041.png


165700765096892.png

كود:
Operation : Read Firmware [ v2.32 ]


ExtSparse   : Enabled
ForceRead   : Disabled


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x02
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 15010051385853414206829BC0A629C7
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info


        EMMC: CID : 15010051385853414206829BC0A642C7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 513858534142
        EMMC: VEN : SAMSUNG : Q8XSAB
        EMMC: SNN : 2191245478 ( 0x829BC0A6) , MF : 4/2015


        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]


        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]


        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000


        RNID : C196B2A29BE8A3DAF0020B5B5B74C715


 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT


DA : USB : HIGH-SPEED


Boot done!


Product Brand  : STARLIGHT
Product Device : VENUS_PLUS
Product Model  : VENUS_PLUS
Product Name   : VENUS_PLUS
Patch Level    : QP1A.190711.020
Display ID     : STARLIGHT_VENUS_PLUS_V001_20210115
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-12-05
Build Time     : 31.01.2021
Product Board  : k37mv1_bsp
Board Platform : mt6737m
Product Manfct : STARLIGHT


MT6737M__STARLIGHT__VENUS_PLUS__10__STARLIGHT_VENUS_PLUS_V001_20210115__QP1A.190711.020


Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : persist.img
ExtSparse : Compression ratio : 76%
Read : dtbo.img
Read : super.img
ExtSparse : Compression ratio : 21%
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : cache.img
Read : userdata.img


FW Size  : 1.73 GB
Android Info saved : _Android_info.txt
Scatter  : MT6737M_Android_scatter.txt
Saved to : C:\Users\fayca\Desktop\MT6737M__STARLIGHT__VENUS_PLUS__10__STARLIGHT_VENUS_PLUS_V001_20210115__QP1A.190711.020\


Done!
Elapsed: 00:06:02
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة



السلام عليكم

Wise-Tech_M1 /frp









Operation : Identify [ v2.34 ]

Mode : FLASH


DA : USB : HIGH-SPEED

Boot done!

Patch Level : PPR1.180610.011
Display ID : Wise-Tech_M1_20191119_V1.0
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-11-05
Build Time : 19.11.2019
Product Model : Wise-Tech_M1
Product Brand : Wise-Tech
Product Name : Wise-Tech_M1
Product Device : Wise-Tech_M1
Product Manfct : eastaeon
Product Info : Wise-Tech_M1
Product Board : k39tv1_64_bsp
Board Platform : mt6739


Done!
Elapsed: 00:00:49



Operation : Reset Settings/Format FS [ v2.34 ]

Mode : FRP [ RESET PROTECTION ]



Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:16

Reconnect Power/Cable!






الله الموفق.
 
Condor TGW709 Factory Reset

Condor TGW709 Factory Reset

165830667197521.png

كود:
Card found : 0E82847A , v0151Infinity-Box RockChip Service Tool [RKT] v2.02




Operation : Reset Settings [ v2.02 ]


----- > Phone/Tablet : 
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box : 
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!


Wait for device ... 
Device Connected!
Interface test : Passed
Device mode : 0x0006


Machine : RK312X
Device  : TGW709
ExtInfo : 4.4.2


SoC CPU : 312A
SoC PDT : 2014
SoC SWN : 0730
SoC REV : V100


Flash CSx  : 0x00
Flash Type : ADDE14A742 [ NAND ] 
Flash Vend : HYNIX
Flash Size : 0x0000000212000000 ( 8.28 GiB )
Flash Info : 4194304/16384/32/40/1


Connect Ok!


Wiping UserData ... 
Wipe DATA Ok!


Done!
Elapsed: 00:01:06
 
Infinix HOT 10 LITE (X657B) FRP Reset

Infinix HOT 10 LITE (X657B) FRP Reset

165885129467971.png


165885129596642.png

كود:
Load IDBase v1121431 Ok!


Operation : Reset Settings/Format FS [ v2.32 ]


Mode : FULL FACTORY ( WIPE + FRP )


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...




Device not found!
>>> Check cable, battery, connection and drivers!


Reconnect Power/Cable!




Operation : Reset Settings/Format FS [ v2.32 ]


Mode : FRP [ RESET PROTECTION ]


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : C3C3836E2743D1E941B78D6D30B23D67
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 7E058C21A367EF6D0915D50610438AE89B30E9F32E98496C673211BC7504A1D6
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info


        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]


        EMMC: CID : D6010335384B373231690773B1244871
        EMMC: VEN : UNKNOWN [0xD6] : OEM : 3 : ID : 35384B373231
        EMMC: VEN : UNKNOWN [0xD6] : 58K721
        EMMC: SNN : 125022500 ( 0x0773B124) , MF : 4/2021


        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE67800000 [ 57.62 GB ]


        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000


        RNID : 62846ADB7D15DE407047F85B2269F2B3


DA : USB : HIGH-SPEED


Boot done!


Format Ok : RESET PROTECTION


Done!
Elapsed: 00:00:28


Reconnect Power/Cable!


Operation : Identify [ v2.32 ]


Mode : FLASH


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...


PTFN : MediaTek USB Port_V1632 (COM4)
MODE : BOOTROM
PORT : 4
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : C3C3836E2743D1E941B78D6D30B23D67
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 7E058C21A367EF6D0915D50610438AE89B30E9F32E98496C673211BC7504A1D6
BROM : SLA : Local Auth 
BROM : SLA : Starting Auth 
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info


        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]


        EMMC: CID : D6010335384B373231690773B1244871
        EMMC: VEN : UNKNOWN [0xD6] : OEM : 3 : ID : 35384B373231
        EMMC: VEN : UNKNOWN [0xD6] : 58K721
        EMMC: SNN : 125022500 ( 0x0773B124) , MF : 4/2021


        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE67800000 [ 57.62 GB ]


        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000


        RNID : 62846ADB7D15DE407047F85B2269F2B3


DA : USB : HIGH-SPEED


Boot done!


Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117DFJ-QGo-OP-210825V388
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-08-05
Build Time     : 25.08.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED


USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )


NVRAM : TK_MD_BASIC_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V114_9_P17
NVRAM : 0xA3101A3C
NVRAM : State : Ok!
INFO  : WiFi MAC : 5810B714CEC9
INFO  : BlTh MAC : 5810B714CEC8
INFO  : IMEI[1] : 350000000000000
INFO  : IMEI[2] : 350000000000000




Backup sensetive data [ 17 ]
Backup path : Backup\MT6761__C3C3836E2743D1E941B78D6D30B23D67\
[26] Read : NVRAM
[10] Read : NVDATA
[3] Read : PROINFO
[27] Read : LK
[9] Read : NVCFG
[12] Read : PROTECT1
[1] Read : PGPT
[11] Read : PERSIST
[0] Read : PRELOADER
Backup done!




STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB  KEY NOT PROGRAMMED [USABLE]


Done!
Elapsed: 00:01:31
 
Realme C11 2021 (RMX3231) Flash Done

Realme C11 2021 (RMX3231) Flash Done

165885176610041.png


165885176616812.png

كود:
Operation : Flash Firmware [ v2.14 ]


Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!


Wait for device ... 


Device Connected!
BootVersion : SPRD3
Boot : PAC : RMX3231-user-native_SHARKL3_R11.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0020
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!


Boot Done!


PMTMng : Load PMT
PMTMng : 0x4B
PMTMng : Update PMT Ok!


Prepare target ...
Prepare Ok!


CODE  : boot.img
FSIMG  : odmko.img
FSIMG  : socko.img
FSIMG  : cache.img
CODE  : dtbo.img
FSIMG  : userdata.img
CODE  : gnssbdmodem.bin
CODE  : logo.bin
CODE  : vbmeta_product.img
CODE  : vbmeta_system_ext.img
FSIMG  : super.img
ERASE : UBOOT_LOG
ERASE : SYSDUMPDB
CODE  : sharkl3_cm4_spaxy.bin
CODE  : vbmeta_system.img
ERASE : METADATA
ERASE : MISC
CODE  : prodnv.img
CODE  : sml-sign.bin
CODE  : sharkl3_pubcp_SPA_deltanv.bin
CODE  : vbmeta_vendor.img
CODE  : PM_sharkl3_cm4_v2.bin
CODE  : tos-sign.bin
CODE  : vbmeta-sign.img
FSIMG  : persist.img
CODE  : teecfg-sign.bin
UBOOT : u-boot-spl-16k-sign.bin
FSIMG  : my_preload.img
UBOOT : u-boot-sign.bin
ERASE : L_RUNTIMENV1
CODE  : gnssmodem.bin
CODE  : oppo20781.bin
CODE  : realme_720_1600.bmp
CODE  : sharkl3_pubcp_SPA_DM_DSP.bin
CODE  : SC9600_sharkl3_pubcp_SPA_modem.dat
CODE  : sharkl3_pubcp_SPA_LTEA_DSP.bin
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:04:22
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة



السلام عليكم

تفليش wiko lenny3 max بفلاشة مطابقة من المنتدى : هنا ، مع تخطي ملف برلودر.


165959595162551.jpg



Boot done!

[FL] : HW verification passed!

[FL] : Pre-Flash backup

Backup sensetive data [ 18 ]
Backup path : Backup\MT6580__6C39BC7378824EB4C11EB17F8835EAAE\
[3] Read : NVRAM
[16] Read : NVDATA
[2] Read : PROINFO
[7] Read : LK
[4] Read : PROTECT1
[0] Read : PRELOADER
Backup done!

[FL] : Pre-Flash backup passed!

SEC_DL : False (CUST)
SEC_DL : SECURE USB DL DISABLED
SEC_ID : 0x35464646304237304435444533464335

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000000080000
Erase : 0x0000000001C80000 : 0x0000000004720000
Erase : 0x00000000064A0000 : 0x00000003A42E0000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : LK
Write : BOOT
Write : RECOVERY
Write : LOGO
Write : EWDATA
Write : APEDATA
Write : SECRO
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:03:02


الله الموفق.
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

السلام عليكم

فــورمات tecno bc2c ، التبويت بواسطة قطعة jig boot ثم توصيل البطارية ( أظن الأزرار أيضًا تفي بالغرض )


165998890837011.jpg


165998890864382.jpg




Operation : Identify [ v2.14 ]
BootMode : FLASH



Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S


Boot Done!

Device info :
Product Brand : TECNO
Product Name : BC2c-OP
Product Device : TECNO-BC2c
Product Model : TECNO BC2c
Product Board : BC2c
Patch Level : QP1A.190711.020
Display ID : BC2c-SP592AB-QGo-OP-211202V013
Ver. Incmt : AB-OP-211202V013
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-12-05
Build Time : 02.12.2021
Product Info : sp7731e_1h10
Product Board : sp7731e_1h10
Board Platform : sp7731e
Product Manfct : TECNO
Product Manfct : TECNO MOBILE LIMITED

Done!






Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH


Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:27




الله الموفق​
.
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة


السلام عليكم
a107f / smart reset ، بعد فشل دونجل الهيدرا ككل مرة :bangin:

166035037876451.jpg


166035037907262.jpg


Operation : Identify [ v2.34 ]
Mode : FLASH

Boot done!

Product Brand : samsung
Product Device : a10s
Product Model : SM-A107F
Product Name : a10sxx
Patch Level : RP1A.200720.012
Display ID : RP1A.200720.012.A107FXXU8CUH1
Build Time : 05.08.2021
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-07-01
Product Info : a10s
Product Board : S96116RA1
Board Platform : mt6765
Product Manfct : samsung

Done!



Operation : Reset Settings/Format FS [ v2.34 ]

Mode : SMART RESET
Boot done!
SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA

Done!



الله الموفق.
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

ACE URBAN 3 FLASH DONE
p_2460aeln81.png
p_246096kt62.png
 
Nokia 5310 2020 (TA-1212) Reset User Code

Nokia 5310 (2020) (TA-1212) Reset User Code

166452037439851.png

كود:
Card found: S/N : 00000000 , v0151Registered to: *******


Connect phone on selected interface...




Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!


--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 118 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : EA8CCA266C780AC803EDE2B3E8134136
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

CONDOR P6 PRO LTE SMART RESET
p_24734ooi61.png
p_247385v5e2.png
 
رد: تجارب الاعضاء فى تفليش وفك الشفرة وتصليح الايمي على الواجهات الاخرى غير المذكورة

CONDOR- L2PRO- SMART RESET
p_24803h4qr1.png
p_2480nwji22.png
 
أعلى