كود:
Start Connect v3.19
Config: Vivo/V2026 Boot [DA] Factory v7
Port: BROM + PL; BROM force: Off
DA Key: custom v1; LSLA: On; H8T: On; Auto-EMI: On
Power device Off and connect cable now
BROM: Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #35 ] MediaTek PreLoader USB VCOM (Android) (COM35) 0E8D:2000
Waiting for boot Ack...
Handshake... Ok
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
sec flags 0x0005 [SBC SDA]; BROM/BL ver FF/03 [PRELOADER] caps 0x00000007|00000000
MEID: 3DD0852B1CC78240E67780A2E74901D5
SOCID: D1BA452DB11B9FE6FFBB556EEBAA1F61F69EC23B6CE52499E59FF470235D88F7
[7c77dd2d] Vivo\2022-12\MTK_AllInOne_DA.2022-01.a054144e.bin
MT6765
Get bootcode... Ok
DA vendor: bbk
DA Key: custom v1 1-|2~
Send DA1... Ok
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set Checksum [none]... Ok
DA set params... EXT RAM Ok: PRELOADER
Boot DA2/1... warn 0xC0070004 warn=26
Boot DA2/2... Ok
DA sync... Ok
DA Auth no need
Get hardware info...
SRAM: 0x0003A000 232.00 Kb
DRAM: 0xC0000000 3.00 Gb
EMMC CID: 150100445836384D4209174AD0D21871 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445836384D42 [DX68MB] PRV: 0x09 Serial: 390779090 0x174AD0D2
MM/YY: 1/2021
BOOT1/2: 0x00400000 4.00 Mb | 00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 8A00 HWv: CA00 HWc: 0766 SWv: 0000 Evo: 0000 Helio Cervino|P35|G35|G36|G37|G50|MT8768t [v5]; FireFly [FF] support: Yes
MEID: 3DD0852B1CC78240E67780A2E74901D5
SOCID: D1BA452DB11B9FE6FFBB556EEBAA1F61F69EC23B6CE52499E59FF470235D88F7
HRID: E957609CB26F776418DD9811DBCC7146
RNID: 49B85271BA19465C5291ACFE739A0A30
USB: HIGH-SPEED
DA Key: custom v1 1-|2+; Allow errors: Yes
Boot Ok 1 sec
SoC drivers: MediaTek PreLoader USB VCOM (Android) v3.0.1504.0
dev-keys saved: E:\New folder\CM2MT2\backup\keys.3dd0852b1cc78240e67780a2e74901d5.json
More keys you may get via [Hardware keys, keys.json] menu
[DA3] ping... Ok v07.00.06.03.04.00
Get 1st partition table... type 0x64 Ok 235 us GPT Ok
1st;mbr is protective;raw.len=8000
PGPT 47 entries
OS not detected yet. Detect? Yes
Device has no slots
Slot config not found
Probe boot... recovery v2 gzip ramdisk.size=71.07 Mb; got 2 files; boot v2 gzip ramdisk.size=1.70 Mb; Ok 157 us
Backup E:\New folder\CM2MT2\backup\MT6765__3DD0852B1CC78240E67780A2E74901D5_vivo-v2026-k65v1-64-bsp\
[seccfg] Ok 219 us
[nvram] Ok 1 sec
[protect1] Ok 219 us
[protect2] Ok 359 us
[proinfo] Ok 94 us
[persist] Ok 1 sec
[lk] Ok 1 sec [9e2a5d18] k65v1_64_bsp-23c3fa0-20221130200527-20240408155715
[pgpt] Ok
[preloader] Ok 125 us MT6765 preloader_k65v1_64_bsp.bin with 9 memory types [291a25e7] slots: no
[nvdata] Ok 1 sec
[nvcfg] Ok 782 us
[sec1] Ok 93 us ZEROES file deleted
Done 11 files
Pack... E:\New folder\CM2MT2\backup\MT6765__3DD0852B1CC78240E67780A2E74901D5_vivo-v2026-k65v1-64-bsp\ Ok 2 sec
Verify E:\New folder\CM2MT2\backup\MT6765__3DD0852B1CC78240E67780A2E74901D5_vivo-v2026-k65v1-64-bsp.7z Enough [vivo-v2026-k65v1-64-bsp] 27 sec
Set [OS info] On to get firmware version on connect
Set [Deep info] On to get modem, bootloader, frp and other info
Set [HW health] On to get hardware health state
Set [RPMB state] On to get RPMB state
Stop Connect v3.19 1 min 46 sec
Start FRP Erase Userdata v3.19
ID: vivo-v2026-k65v1-64-bsp
Strategy [vivo]
Firmware ID: MT6765_vivo_V2026_OSv11_RP1A.200720.012_k65v1_64_bsp
Android ver: 11
userdata: [ext4] FBE [file based encryption] cache: [ext4]
Backup exist E:\New folder\CM2MT2\backup\MT6765__3DD0852B1CC78240E67780A2E74901D5_vivo-v2026-k65v1-64-bsp.7z
Reset FRP... frp config found
wipe frp... Ok 2 sec Done(1)
Reset for vivo...
wipe backup... Ok 9 sec Done(1)
Reset userdata...
Userdata may have preinstalled Apps. Wipe anyway? Yes Ok 11 sec
Reset cache... Ok 11 sec
Reset metadata... Ok 11 sec
Reset md_udc... Ok 10 sec
Reset: Wipe...
set factory wipe/misc... End
set factory wipe/para... Ok
Stop FRP Erase Userdata v3.19 1 min 4 sec
In case of issue write userdata from factory firmware via [MemTool]
In case of recovery loop make Reset Userdata with [User Make filesystem]
If device stuck on boot logo or recovery - make [Fix No Command]
التعديل الأخير بواسطة المشرف: