بسم الله الرحمن الرحيم
Samsung SM-E135F (Galaxy F13) Erase FRP By ISP
1- ادخال الهاتف وضع Download للتأكد من مستوى الحماية
مستوى الحماية في Bootloader هو 11 اي الهاتف لا يقبل عمل Erase FRP في وضع EUB Mode
2- عمل Erase FRP عن طريق ISP Pinout باستعمال Medusa Pro
Samsung Galaxy A13 (SM-A135F) ISP Pinout
Samsung Galaxy F13 (SM-E135F) ISP Pinout
Samsung Galaxy M13 (SM-M135F) ISP Pinout
بيانات العملية
Samsung SM-E135F (Galaxy F13) Erase FRP By ISP
1- ادخال الهاتف وضع Download للتأكد من مستوى الحماية
مستوى الحماية في Bootloader هو 11 اي الهاتف لا يقبل عمل Erase FRP في وضع EUB Mode
2- عمل Erase FRP عن طريق ISP Pinout باستعمال Medusa Pro
Samsung Galaxy A13 (SM-A135F) ISP Pinout
Samsung Galaxy F13 (SM-E135F) ISP Pinout
Samsung Galaxy M13 (SM-M135F) ISP Pinout
بيانات العملية
كود:
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC DP6DBB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100445036444242003B63D05E7929
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DP6DBB
Product revision : 0.0
Product serial number : (hex) 3B63D05E
Manufacturing date : 07/2022
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 20357120 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file D:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DP6DBB_22_09_2025_00_33_36.bin.
RPMB: Counter of the successful data write requests = 675.
EMMC connected successful.
---------------------------------------------------------------
SW: 2.2.5.7; FW: 1.27.
Part.00: GPT (00000000, 00400000) 4 MB
Part.01: efs (00400000, 01400000) 20 MB
Part.02: sec_efs (01800000, 01400000) 20 MB
Part.03: reserved (02C00000, 00400000) 4 MB
Part.04: cpefs (03000000, 00800000) 8 MB
Part.05: steady (03800000, 00400000) 4 MB
Part.06: param (03C00000, 00800000) 8 MB
Part.07: bota (04400000, 02400000) 36 MB
Part.08: ldfw (06800000, 00800000) 8 MB
Part.09: tzsw (07000000, 00180000) 1536 KB
Part.10: tzar (07180000, 00680000) 6.5 MB
Part.11: keystorage (07800000, 00080000) 512 KB
Part.12: nad_refer (07880000, 00100000) 1024 KB
Part.13: up_param (07980000, 00800000) 8 MB
Part.14: misc (08180000, 00200000) 2048 KB
Part.15: uh (08380000, 00200000) 2048 KB
Part.16: uhcfg (08580000, 00400000) 4 MB
Part.17: blcmd (08980000, 00080000) 512 KB
Part.18: boot (08A00000, 02C00000) 44 MB
Part.19: recovery (0B600000, 03500000) 53 MB
Part.20: dtb (0EB00000, 00800000) 8 MB
Part.21: dtbo (0F300000, 00800000) 8 MB
Part.22: radio (0FB00000, 03200000) 50 MB
Part.23: persistent (12D00000, 00080000) 512 KB
Part.24: vbmeta (12D80000, 00080000) 512 KB
Part.25: vbmeta_system (12E00000, 00080000) 512 KB
Part.26: keyrefuge (12E80000, 01000000) 16 MB
Part.27: keydata (13E80000, 01000000) 16 MB
Part.28: metadata (14E80000, 02000000) 32 MB
Part.29: fmp_selftest (16E80000, 00001000) 4 KB
Part.30: reserved2 (16E81000, 0017F000) 1532 KB
Part.31: super (17000000, 178000000) 5.875 GB
Part.32: prism (18F000000, 37000000) 880 MB
Part.33: optics (1C6000000, 01800000) 24 MB
Part.34: cache (1C7800000, 0C800000) 200 MB
Part.35: omr (1D4000000, 03200000) 50 MB
Part.36: cp_debug (1D7200000, 00500000) 5 MB
Part.37: spu (1D7700000, 03200000) 50 MB
Part.38: userdata (1DA900000, CB4800000) 50.82 GB
Backuping efs partition...
Opening D:/Program Files (x86)/Medusa Pro Software/Backups/DP6DBB_efs_0x2000_0xa000_22_09_2025_00_33_36.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:08
SW: 2.2.5.7; FW: 1.27.
Backuping cpefs partition...
Opening D:/Program Files (x86)/Medusa Pro Software/Backups/DP6DBB_cpefs_0x18000_0x4000_22_09_2025_00_33_36.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.2.5.7; FW: 1.27.
---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Reset FRP
Backuping FRP data...
Opening D:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x96800_0x400_22_09_2025_00_33_57.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.7; FW: 1.27.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.5.7; FW: 1.27.
Reset FRP
Backuping FRP data...
Opening D:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x96800_0x400_22_09_2025_00_34_00.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5.7; FW: 1.27.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.5.7; FW: 1.27.