CM2 - MT2 Service Tool v2.89
Probe UAC... Ok
Wait...
S/N: 0041DEDF35 v0166
Init log engine... Ok
Build directories tree... Ok
Backup files: E:\New folder\cm2\backup\
Compact backup files...
Backup files: 12 dirs: 2
Load EMI database... 28 items
Load IDBase v915508 Ok
Load device list... Ok 4 sec
Init filesystem tools... Ok
init libusb... v1.2.6.0
Ready
DA selected: 0_generic | 2022-09 [luci] MT6781 | DA_BR.2022-09-07.bin
MT6781_Generic [LUCI] [flash_id.txt] supported memory types:
MT064GASAO2U21
H9HQ15AFAMBDAR
H9HQ16AECMMDAR
H9HQ16AFAMMDAR
H9HQ21AFAMADAR
KM8B8001JM-BC0
KM8F8001JM-B813
MT128GASAO4U21
MT256GAXAU4U22
DA selected: 0_rare | MT6570_a | MTK_AllInOne_DA.c0d01ecb.bin
3 DA available, in case of boot issue try it one-by-one
DA files missing
Select another Device from list or Click to [Get boot files]
DA selected: 0_base | base_v2316 | MTK_AllInOne_DA.1d5fdec4.bin
5 DA available, in case of boot issue try it one-by-one
Start Connect v2.89
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21)
Waiting for boot Ack...
Boot Init... Ok
MT6739 HWs: 0x8A00 HWv: 0xCB00 HWc: 0x0699 SWv: 0x0002 Evo: 0x0000 Zion
Type: [Raphael]
SecLevel: 0x0000 Plain
BROM/BL ver: 0xFF/0x03 [PRELOADER]
SoC support by Boot [FF] FireFly: Yes
SOCID: 86F602248FA0F37469E7495090E54D5C1BAD50C7A192A4C51D23F85937773124
Selected loaders:
[07fb00a6] E:\New folder\cm2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for bootcode... Ok
Vendor ID: 255 generic
Sending DA1... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: PRELOADER EXT_RAM initialized
Boot DA2... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes]
DA Sync... Ok
DA Auth Ok
Get hardware info...
SRAM: 0x00020000 128.00 Kb
DRAM: 0x40000000 1024.00 Mb
EMMC CID: 150100464531324D420DCEBC9BAA646F crc Ok
Vendor: Samsung OEM: 0x0100 ID: 464531324D42 [FE12MB] PRV: 0x0D
Serial: 3468467114 0xCEBC9BAA
MM/YY: 6/2017
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x3A3E00000 14.56 Gb
MT6739 HWs: 0x8A00 HWv: 0xCB00 HWc: 0x0699 SWv: 0x0000 Evo: 0x0000 Zion
Type: [Raphael]
RNID: 64A6BB702FBF153B7FA83787DF207C55
SOCID: 86F602248FA0F37469E7495090E54D5C1BAD50C7A192A4C51D23F85937773124
USB: HIGH-SPEED
Boot done 10 sec [Adjustable: Yes, Adjusted: Yes, Allow errors: Yes, Collision: 96|4]
MEID: E9A7BE4FFDFB396B03F9F8EF51F4F20E
EMMC RPMB State: RPMB Key not programmed [USABLE]
RPMB Key not programmed [USABLE]
Get 1st partition table... Ok 219 us GPT Ok
PGPT 34 entries
Read [preloader]... Ok 125 us
preloader (0) MT6739 preloader_fd3901.bin with 4 memory types [20191014-094442] slots: no
Read [preloader_backup]... Ok 125 us
preloader (1) MT6739 preloader_fd3901.bin with 4 memory types [20191014-094442] slots: no
Device has no slots
Probe LK...
lk [d24f63b3] secure-secure
get modem info... TK_MD_BASIC_MDBIN_PCB01_MT6739_S00.MOLY_LR12A_R2_MP_V56_1_P4
Secondary RPMB... Off
Probe FRP... Most probably Off
Probe bootloader... Seems as locked
Reset port...
Stop [Job 15981238] Connect v2.89 10 sec
Start FRP Safe. Keep Userdata v2.89
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21)
Waiting for boot Ack...
Boot Init...
PORT (0000) Tx: 0x1F A device attached to the system is not functioning Fail
Stop [Job 15981267] FRP Safe. Keep Userdata v2.89 6 sec
Start FRP Safe. Keep Userdata v2.89
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init... Ok
MT6739 HWs: 0x8A00 HWv: 0xCB00 HWc: 0x0699 SWv: 0x0002 Evo: 0x0000 Zion
Type: [Raphael]
MEID: D5C67B1DF94157C674DC390ECF59EFD9
SecLevel: 0x0000 Plain
BROM/BL ver: 0x05/0xFE [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 86F602248FA0F37469E7495090E54D5C1BAD50C7A192A4C51D23F85937773124
Start Auth... Ok
Continue Auth...
configure libusb... Ok
EMI Found
Selected loaders:
[07fb00a6] E:\New folder\cm2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for bootcode... Ok
Vendor ID: 255 generic
Sending DA1... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: BROM EXT_RAM NOT initialized
EMI FireFly preloader_fd3901.bin with 4 memory types [645544f1] slots: no
eMMC DDR3 ID: 150100464531324D42 FE12MB FE12MB RAM: 1024.00 Mb
eMMC DDR3 ID: 150100464536324D42 FE62MB FE62MB RAM: 1024.00 Mb
eMMC DDR3 ID: 150100514536334D42 QE63MB QE63MB RAM: 2.00 Gb
eMMC DDR3 ID: 150100514531334D42 QE13MB QE13MB RAM: 2.00 Gb
Push EMI... EXT_RAM CFG Passed
Boot DA2... Ok [Required: Yes, Adjustable: Yes, Adjusted: Yes]
DA Sync... Ok
DA Auth Ok
Get hardware info...
SRAM: 0x00020000 128.00 Kb
DRAM: 0x40000000 1024.00 Mb
EMMC CID: 150100464531324D420DCEBC9BAA646F crc Ok
Vendor: Samsung OEM: 0x0100 ID: 464531324D42 [FE12MB] PRV: 0x0D
Serial: 3468467114 0xCEBC9BAA
MM/YY: 6/2017
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x3A3E00000 14.56 Gb
MT6739 HWs: 0x8A00 HWv: 0xCB00 HWc: 0x0699 SWv: 0x0000 Evo: 0x0000 Zion
Type: [Raphael]
RNID: 64A6BB702FBF153B7FA83787DF207C55
MEID: D5C67B1DF94157C674DC390ECF59EFD9
SOCID: 86F602248FA0F37469E7495090E54D5C1BAD50C7A192A4C51D23F85937773124
USB: HIGH-SPEED
Boot done 15 sec [Adjustable: Yes, Adjusted: Yes, Allow errors: Yes, Collision: 96|4]
Get 1st partition table... Ok 234 us GPT Ok
PGPT 34 entries
Device has no slots
Probe boot...
recovery;gzip;ramdisk size 7.74 Mb;2 found
boot;gzip;ramdisk size 1.58 Mb;1 found Ok 594 us
Patch Level: O11019
Display ID: P.G008.1910.A-s
SW Version: P.G008.1910.A-s
Ver. CodeName: REL
Sec. Patch: 2019-09-05
Build Time: 10/14/2019 1:42:59 AM
Product Model: G008
Product Brand: GM
Product Name: G008
Product Device: G008
CPU: armeabi-v7a,armeabi
Product Manfct: General Mobile
Product Info: G008
SW: full_fd3901-user 8.1.0 O11019 P.G008.1910.A-s release-keys
Product Board: fd3901
Board Platform: mt6739
ID: gm-general-mobile-g008-fd3901
Strategy: [none|generic]
Firmware ID: MT6739_General_Mobile_G008_OSv8.1.0_P.G008.1910.A-s_O11019_G008_GM
Android ver: 8.1.0
UserDataFS: [f2fs] FDE [forced encrypt] CacheFS: [ext4]
Reset FRP...
reset frp... Ok 16 us
format frp... Ok 15 us
Completed(1)
Reset: Smart... Leave [none|generic] intact
If FRP still active, make Wipe or Userdata reset
Reset port...
Stop [Job 15981285] FRP Safe. Keep Userdata v2.89 5 sec
Not connected