السلام عليكم والجهاز مطفا
اضغط ازرار الصوت ووصله بالحاسوب
اضغط ازرار الصوت ووصله بالحاسوب
كود:
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.42[/FONT][FONT=Verdana]
[/FONT]
[FONT=Verdana]Backup files: C:\InfinityBox\CM2MT2\backup\[/FONT]
[FONT=Verdana]Compact backup files...[/FONT]
[FONT=Verdana]Backup files: 14 dirs: 2[/FONT]
[FONT=Verdana]Build device list...[/FONT]
[FONT=Verdana]Init environment...[/FONT]
[FONT=Verdana]Load IDBase v124493 Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Check for updates...[/FONT]
[FONT=Verdana]Infinity Chinese Miracle-2 #CM2MT2 v2.43[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Required firmware v0154[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Update configuration...[/FONT]
[FONT=Verdana]Configuration [12170] updated[/FONT]
[FONT=Verdana]Load IDBase v124493 Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation: Identify Device [ v2.42 ][/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FLASH[/FONT]
[FONT=Verdana]PORT: BOTH [ B + P ][/FONT]
[FONT=Verdana][+] Read Deep info: PRL, HW, DEBUG[/FONT]
[FONT=Verdana][+] Auto-EMI[/FONT]
[FONT=Verdana][+] FireFly UNI-Proto[/FONT]
[FONT=Verdana][+] Vendor-Specific Analyzer[/FONT]
[FONT=Verdana][-] Local SLA[/FONT]
[FONT=Verdana][-] Force BROM[/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device [remember Vol+ | Vol-][/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM26)[/FONT]
[FONT=Verdana]MODE: BOOTROM; PORT: 26[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init...[/FONT]
[FONT=Verdana] Init passed[/FONT]
[FONT=Verdana]CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717[/FONT]
[FONT=Verdana] CODE: Merlot[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] MEID: 1AB176FD31DA6C481422291D28462663[/FONT]
[FONT=Verdana]BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT[/FONT]
[FONT=Verdana] VER: 0x05 BL: 0xFE [BOOTROM][/FONT]
[FONT=Verdana] SOCID: 1DC37CFB72F731E74EC2C906F3EDDA1E5D2A80FDCA80770DD918EEDC5E1C675A[/FONT]
[FONT=Verdana] SLA: Local Auth[/FONT]
[FONT=Verdana] SLA: Starting Auth[/FONT]
[FONT=Verdana] SLA: Continue Auth[/FONT]
[FONT=Verdana] FF: Looking for EMI[/FONT]
[FONT=Verdana] FF: EMI found[/FONT]
[FONT=Verdana] SLA: Auth Passed; SEC: 0x000000E0[/FONT]
[FONT=Verdana]AGENT: AUTO: 0_base: base_v2216[/FONT]
[FONT=Verdana] [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]Found MT6761[/FONT]
[FONT=Verdana]AGENT: MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana]BROM: Sending 1st DA...[/FONT]
[FONT=Verdana] DA sent[/FONT]
[FONT=Verdana] Transfer control to DA...[/FONT]
[FONT=Verdana]DA: AGENT started[/FONT]
[FONT=Verdana]DA: SYNC[/FONT]
[FONT=Verdana] MODE: BROM[/FONT]
[FONT=Verdana] EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMMC CID: 150100514436334D4201CDA496BF5875[/FONT]
[FONT=Verdana] VEN: Samsung OEM: 0 ID: 514436334D42 [QD63MB] PRV: 0x01[/FONT]
[FONT=Verdana] SNN: 3450115775 [0xCDA496BF][/FONT]
[FONT=Verdana] MM/YY: 5/2021[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMI: Init EMI by INTERNAL Database[/FONT]
[FONT=Verdana]EMI: FireFly preloader_ke5_h6123go.bin with 10 memory type(s) supported[/FONT]
[FONT=Verdana] 1. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 3.00 GB[/FONT]
[FONT=Verdana] 2. eMMC DDR3 ID: 90014A484247346132 Ven: Hynix | Dev: HBG4a2 RAM: 3.00 GB[/FONT]
[FONT=Verdana] 3. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 2.00 GB[/FONT]
[FONT=Verdana] 4. eMMC DDR3 ID: 150100514436334D42 Ven: Samsung | Dev: QD63MB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 5. eMMC DDR3 ID: 150100475836424142 Ven: Samsung | Dev: GX6BAB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 6. eMMC DDR3 ID: 150100474436424D42 Ven: Samsung | Dev: GD6BMB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 7. eMMC DDR3 ID: 150100515836334142 Ven: Samsung | Dev: QX63AB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 8. eMMC DDR3 ID: 90014A484347386134 Ven: Hynix | Dev: HCG8a4 RAM: 4.00 GB[/FONT]
[FONT=Verdana] 9. eMMC DDR3 ID: 700100474D424D4541 Ven: Kingston | Dev: GMBMEA RAM: 2.00 GB[/FONT]
[FONT=Verdana] 10. eMMC DDR3 ID: 7001004751424D4241 Ven: Kingston | Dev: GQBMBA RAM: 2.00 GB[/FONT]
[FONT=Verdana]EMI: EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]DA: Boot to 2nd DA...[/FONT]
[FONT=Verdana] 2nd stage confirmed[/FONT]
[FONT=Verdana]DA: SYNC passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Load HW info...[/FONT]
[FONT=Verdana]SRAM: 0x0003A500 [ 233.25 KB ][/FONT]
[FONT=Verdana]DRAM: 0x80000000 [ 2.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMMC CID: 150100514436334D4201CDA496BF5875[/FONT]
[FONT=Verdana] VEN: Samsung OEM: 0 ID: 514436334D42 [QD63MB] PRV: 0x01[/FONT]
[FONT=Verdana] SNN: 3450115775 [0xCDA496BF][/FONT]
[FONT=Verdana] MM/YY: 5/2021[/FONT]
[FONT=Verdana] BOOT1: 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2: 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB: 0x01000000 [ 16.00 MB ][/FONT]
[FONT=Verdana] USER: 0x747C00000 [ 29.12 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0717[/FONT]
[FONT=Verdana] CODE: Merlot[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: 11F593C3EDF74E89FB0E58B187078626[/FONT]
[FONT=Verdana] MEID: 1AB176FD31DA6C481422291D28462663[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]USB: HIGH-SPEED[/FONT]
[FONT=Verdana]Boot done [1][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reading...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]Device PMT:[/FONT]
[FONT=Verdana] Offset 0x000000000000 Size 0x000000400000 preloader[/FONT]
[FONT=Verdana] Offset 0x000000000000 Size 0x000000008000 pgpt[/FONT]
[FONT=Verdana] Offset 0x000000008000 Size 0x000000100000 boot_para[/FONT]
[FONT=Verdana] Offset 0x000000108000 Size 0x000000300000 proinfo[/FONT]
[FONT=Verdana] Offset 0x000000408000 Size 0x000000080000 para[/FONT]
[FONT=Verdana] Offset 0x000000488000 Size 0x000001400000 expdb[/FONT]
[FONT=Verdana] Offset 0x000001888000 Size 0x000000100000 frp[/FONT]
[FONT=Verdana] Offset 0x000001988000 Size 0x000002000000 metadata[/FONT]
[FONT=Verdana] Offset 0x000003988000 Size 0x00000169A000 md_udc[/FONT]
[FONT=Verdana] Offset 0x000005022000 Size 0x000002000000 nvcfg[/FONT]
[FONT=Verdana] Offset 0x000007022000 Size 0x0000047DE000 nvdata[/FONT]
[FONT=Verdana] Offset 0x00000B800000 Size 0x000003000000 persist[/FONT]
[FONT=Verdana] Offset 0x00000E800000 Size 0x000000800000 protect1[/FONT]
[FONT=Verdana] Offset 0x00000F000000 Size 0x000000800000 protect2[/FONT]
[FONT=Verdana] Offset 0x00000F800000 Size 0x000000100000 tkv[/FONT]
[FONT=Verdana] Offset 0x00000F900000 Size 0x000002700000 recovery[/FONT]
[FONT=Verdana] Offset 0x000012000000 Size 0x000000800000 seccfg[/FONT]
[FONT=Verdana] Offset 0x000012800000 Size 0x000000200000 sec1[/FONT]
[FONT=Verdana] Offset 0x000012A00000 Size 0x000006400000 md1img[/FONT]
[FONT=Verdana] Offset 0x000018E00000 Size 0x000000100000 spmfw[/FONT]
[FONT=Verdana] Offset 0x000018F00000 Size 0x000000100000 scp1[/FONT]
[FONT=Verdana] Offset 0x000019000000 Size 0x000000100000 scp2[/FONT]
[FONT=Verdana] Offset 0x000019100000 Size 0x000000100000 sspm_1[/FONT]
[FONT=Verdana] Offset 0x000019200000 Size 0x000000100000 sspm_2[/FONT]
[FONT=Verdana] Offset 0x000019300000 Size 0x000001000000 gz1[/FONT]
[FONT=Verdana] Offset 0x00001A300000 Size 0x000001000000 gz2[/FONT]
[FONT=Verdana] Offset 0x00001B300000 Size 0x000004000000 nvram[/FONT]
[FONT=Verdana] Offset 0x00001F300000 Size 0x000000100000 lk[/FONT]
[FONT=Verdana] Offset 0x00001F400000 Size 0x000000100000 lk2[/FONT]
[FONT=Verdana] Offset 0x00001F500000 Size 0x000002000000 boot[/FONT]
[FONT=Verdana] Offset 0x000021500000 Size 0x000000800000 logo[/FONT]
[FONT=Verdana] Offset 0x000021D00000 Size 0x000000800000 dtbo[/FONT]
[FONT=Verdana] Offset 0x000022500000 Size 0x000000500000 tee1[/FONT]
[FONT=Verdana] Offset 0x000022A00000 Size 0x000000500000 tee2[/FONT]
[FONT=Verdana] Offset 0x000022F00000 Size 0x000000800000 vbmeta[/FONT]
[FONT=Verdana] Offset 0x000023700000 Size 0x000000800000 vbmeta_system[/FONT]
[FONT=Verdana] Offset 0x000023F00000 Size 0x000000900000 vbmeta_vendor[/FONT]
[FONT=Verdana] Offset 0x000024800000 Size 0x0000DB800000 super[/FONT]
[FONT=Verdana] Offset 0x000100000000 Size 0x000012C00000 cache[/FONT]
[FONT=Verdana] Offset 0x000112C00000 Size 0x000012C00000 tranfs[/FONT]
[FONT=Verdana] Offset 0x000125800000 Size 0x00061E8FBE00 userdata[/FONT]
[FONT=Verdana] Offset 0x0007440FBE00 Size 0x000002B00000 otp[/FONT]
[FONT=Verdana] Offset 0x000746BFBE00 Size 0x000001000000 flashinfo[/FONT]
[FONT=Verdana] Offset 0x000747BFBE00 Size 0x000000004200 sgpt[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana] SW : TECNO/KE5-GL/TECNO-KE5:10/QP1A.190711.020/ABC-GL-220413V517:user/release-keys[/FONT]
[FONT=Verdana] Product Brand: TECNO[/FONT]
[FONT=Verdana] Product Device: TECNO-KE5[/FONT]
[FONT=Verdana] Product Model: TECNO KE5[/FONT]
[FONT=Verdana] Product Name: KE5-GL[/FONT]
[FONT=Verdana] Patch Level: QP1A.190711.020[/FONT]
[FONT=Verdana] Display ID: KE5-H6123ABC-QGo-GL-220413V517[/FONT]
[FONT=Verdana] SW Version: ABC-GL-220413V517[/FONT]
[FONT=Verdana] Ver. CodeName: REL[/FONT]
[FONT=Verdana] Ver. Release: 10[/FONT]
[FONT=Verdana] Sec. Patch: 2022-04-05[/FONT]
[FONT=Verdana] Build Time: 13/04/2022 05:26:54 ص[/FONT]
[FONT=Verdana] CPU : armeabi-v7a,armeabi[/FONT]
[FONT=Verdana] Product Info: ke5_h6123go[/FONT]
[FONT=Verdana] SW : full_ke5_h6123go-user 10 QP1A.190711.020 275669 release-keys[/FONT]
[FONT=Verdana] Product Board: TECNO-KE5[/FONT]
[FONT=Verdana] Board Platform: mt6761[/FONT]
[FONT=Verdana] Product Manfct: TECNO MOBILE LIMITED[/FONT]
[FONT=Verdana]Strategy: 7[/FONT]
[FONT=Verdana]Firmware ID: MT6761_TECNO_MOBILE_LIMITED_TECNO_KE5_10_KE5-H6123ABC-QGo-GL-220413V517_QP1A.190711.020_ke5_h6123go[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Verify firmware [MT6761_TECNO_MOBILE_LIMITED_TECNO_KE5_10_KE5-H6123ABC-QGo-GL-220413V517_QP1A.190711.020_ke5_h6123go]...[/FONT]
[FONT=Verdana]Firmware is unknown[/FONT]
[FONT=Verdana]Please upload file https://infinity-box.com/?r=100020[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]userData : fileSystem : [f2fs] with FBE ( file based encryption )[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]NVRAM: TK_MD_BASIC_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V118_11_P53[/FONT]
[FONT=Verdana]NVRAM: Items: 0xA3 Size: 0x101A3C State: Ok[/FONT]
[FONT=Verdana] WiFi MAC: 08B49D1867CF[/FONT]
[FONT=Verdana] BlTh MAC: 08B49D1867CE[/FONT]
[FONT=Verdana] IMEI[1]: 354443484558444[/FONT]
[FONT=Verdana] IMEI[2]: 354443484558451[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Verify device config...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]Loaders Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Backup [20] to C:\InfinityBox\CM2MT2\backup\MT6761__1AB176FD31DA6C481422291D28462663\[/FONT]
[FONT=Verdana][26] Read: NVRAM[/FONT]
[FONT=Verdana][10] Read: NVDATA[/FONT]
[FONT=Verdana][3] Read: PROINFO[/FONT]
[FONT=Verdana][27] Read: LK[/FONT]
[FONT=Verdana][9] Read: NVCFG[/FONT]
[FONT=Verdana][12] Read: PROTECT1[/FONT]
[FONT=Verdana][1] Read: PGPT[/FONT]
[FONT=Verdana][11] Read: PERSIST[/FONT]
[FONT=Verdana][0] Read: PRELOADER[/FONT]
[FONT=Verdana]Done 9 files[/FONT]
[FONT=Verdana]Compress: C:\InfinityBox\CM2MT2\backup\MT6761__1AB176FD31DA6C481422291D28462663\[/FONT]
[FONT=Verdana]Cleanup...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]Verify C:\InfinityBox\CM2MT2\backup\MT6761__1AB176FD31DA6C481422291D28462663.7z[/FONT]
[FONT=Verdana]Verified[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]STORAGE : Life Status : eMMC : OK![/FONT]
[FONT=Verdana]STORAGE : OTP Status : UNLOCKED![/FONT]
[FONT=Verdana]STORAGE : RPMB Status : eMMC : RPMB KEY NOT PROGRAMMED [USABLE][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Scan preloader...[/FONT]
[FONT=Verdana]EMI: MT6761 preloader_ke5_h6123go.bin with 10 memory type(s) supported[/FONT]
[FONT=Verdana] 1. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 3.00 GB[/FONT]
[FONT=Verdana] 2. eMMC DDR3 ID: 90014A484247346132 Ven: Hynix | Dev: HBG4a2 RAM: 3.00 GB[/FONT]
[FONT=Verdana] 3. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 2.00 GB[/FONT]
[FONT=Verdana] 4. eMMC DDR3 ID: 150100514436334D42 Ven: Samsung | Dev: QD63MB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 5. eMMC DDR3 ID: 150100475836424142 Ven: Samsung | Dev: GX6BAB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 6. eMMC DDR3 ID: 150100474436424D42 Ven: Samsung | Dev: GD6BMB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 7. eMMC DDR3 ID: 150100515836334142 Ven: Samsung | Dev: QX63AB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 8. eMMC DDR3 ID: 90014A484347386134 Ven: Hynix | Dev: HCG8a4 RAM: 4.00 GB[/FONT]
[FONT=Verdana] 9. eMMC DDR3 ID: 700100474D424D4541 Ven: Kingston | Dev: GMBMEA RAM: 2.00 GB[/FONT]
[FONT=Verdana] 10. eMMC DDR3 ID: 7001004751424D4241 Ven: Kingston | Dev: GQBMBA RAM: 2.00 GB[/FONT]
[FONT=Verdana]Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_ke5_h6123go.bin[/FONT]
[FONT=Verdana]Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_ke5_h6123go.bin [898e883b]...[/FONT]
[FONT=Verdana]Exist[/FONT]
[FONT=Verdana]Done: 00:00:58[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation: Reset Settings/Format FS [ v2.42 ][/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FRP [ RESET PROTECTION ][/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device [remember Vol+ | Vol-][/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM26)[/FONT]
[FONT=Verdana]MODE: BOOTROM; PORT: 26[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init...[/FONT]
[FONT=Verdana]Fail to init protocol[/FONT]
[FONT=Verdana]Disconnect battery and cable[/FONT]
[FONT=Verdana]- Check USB drivers[/FONT]
[FONT=Verdana]- Change cable - Change USB port - Do not use USB-hub[/FONT]
[FONT=Verdana]- Select another base|model|DA[/FONT]
[FONT=Verdana]Try again[/FONT]
[FONT=Verdana]Reconnect Power/Cable now[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Operation: Reset Settings/Format FS [ v2.42 ][/FONT]
[FONT=Verdana]Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X[/FONT]
[FONT=Verdana]Mode: FRP [ RESET PROTECTION ][/FONT]
[FONT=Verdana]Wait...[/FONT]
[FONT=Verdana]1. Power Off the device[/FONT]
[FONT=Verdana]2. Wait 20 seconds[/FONT]
[FONT=Verdana]3. Connect USB cable to device [remember Vol+ | Vol-][/FONT]
[FONT=Verdana]Waiting for device connection...[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]PTFN: MediaTek USB Port (COM26)[/FONT]
[FONT=Verdana]MODE: BOOTROM; PORT: 26[/FONT]
[FONT=Verdana]Waiting BOOT ack...[/FONT]
[FONT=Verdana]BROM: Skip ACK verify[/FONT]
[FONT=Verdana]BROM: Init...[/FONT]
[FONT=Verdana] Init passed[/FONT]
[FONT=Verdana]CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717[/FONT]
[FONT=Verdana] CODE: Merlot[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] MEID: 1AB176FD31DA6C481422291D28462663[/FONT]
[FONT=Verdana]BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT[/FONT]
[FONT=Verdana] VER: 0x05 BL: 0xFE [BOOTROM][/FONT]
[FONT=Verdana] SOCID: 1DC37CFB72F731E74EC2C906F3EDDA1E5D2A80FDCA80770DD918EEDC5E1C675A[/FONT]
[FONT=Verdana] SLA: Local Auth[/FONT]
[FONT=Verdana] SLA: Starting Auth[/FONT]
[FONT=Verdana] SLA: Continue Auth[/FONT]
[FONT=Verdana] SLA: Auth Passed; SEC: 0x000000E0[/FONT]
[FONT=Verdana]AGENT: AUTO: 0_base: base_v2216[/FONT]
[FONT=Verdana] [3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin[/FONT]
[FONT=Verdana]Looking for suitable BootChain in DA...[/FONT]
[FONT=Verdana]Found MT6761[/FONT]
[FONT=Verdana]AGENT: MTK_DOWNLOAD_AGENT[/FONT]
[FONT=Verdana]BROM: Sending 1st DA...[/FONT]
[FONT=Verdana] DA sent[/FONT]
[FONT=Verdana] Transfer control to DA...[/FONT]
[FONT=Verdana]DA: AGENT started[/FONT]
[FONT=Verdana]DA: SYNC[/FONT]
[FONT=Verdana] MODE: BROM[/FONT]
[FONT=Verdana] EXT_RAM NOT initialized[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMMC CID: 150100514436334D4201CDA496BF5875[/FONT]
[FONT=Verdana] VEN: Samsung OEM: 0 ID: 514436334D42 [QD63MB] PRV: 0x01[/FONT]
[FONT=Verdana] SNN: 3450115775 [0xCDA496BF][/FONT]
[FONT=Verdana] MM/YY: 5/2021[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMI: Init EMI by INTERNAL Database[/FONT]
[FONT=Verdana]EMI: FireFly preloader_ke5_h6123go.bin with 10 memory type(s) supported[/FONT]
[FONT=Verdana] 1. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 3.00 GB[/FONT]
[FONT=Verdana] 2. eMMC DDR3 ID: 90014A484247346132 Ven: Hynix | Dev: HBG4a2 RAM: 3.00 GB[/FONT]
[FONT=Verdana] 3. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 2.00 GB[/FONT]
[FONT=Verdana] 4. eMMC DDR3 ID: 150100514436334D42 Ven: Samsung | Dev: QD63MB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 5. eMMC DDR3 ID: 150100475836424142 Ven: Samsung | Dev: GX6BAB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 6. eMMC DDR3 ID: 150100474436424D42 Ven: Samsung | Dev: GD6BMB RAM: 3.00 GB[/FONT]
[FONT=Verdana] 7. eMMC DDR3 ID: 150100515836334142 Ven: Samsung | Dev: QX63AB RAM: 2.00 GB[/FONT]
[FONT=Verdana] 8. eMMC DDR3 ID: 90014A484347386134 Ven: Hynix | Dev: HCG8a4 RAM: 4.00 GB[/FONT]
[FONT=Verdana] 9. eMMC DDR3 ID: 700100474D424D4541 Ven: Kingston | Dev: GMBMEA RAM: 2.00 GB[/FONT]
[FONT=Verdana] 10. eMMC DDR3 ID: 7001004751424D4241 Ven: Kingston | Dev: GQBMBA RAM: 2.00 GB[/FONT]
[FONT=Verdana]EMI: EXT_RAM CFG Passed[/FONT]
[FONT=Verdana]DA: Boot to 2nd DA...[/FONT]
[FONT=Verdana] 2nd stage confirmed[/FONT]
[FONT=Verdana]DA: SYNC passed[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Load HW info...[/FONT]
[FONT=Verdana]SRAM: 0x0003A500 [ 233.25 KB ][/FONT]
[FONT=Verdana]DRAM: 0x80000000 [ 2.00 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]EMMC CID: 150100514436334D4201CDA496BF5875[/FONT]
[FONT=Verdana] VEN: Samsung OEM: 0 ID: 514436334D42 [QD63MB] PRV: 0x01[/FONT]
[FONT=Verdana] SNN: 3450115775 [0xCDA496BF][/FONT]
[FONT=Verdana] MM/YY: 5/2021[/FONT]
[FONT=Verdana] BOOT1: 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] BOOT2: 0x00400000 [ 4.00 MB ][/FONT]
[FONT=Verdana] RPMB: 0x01000000 [ 16.00 MB ][/FONT]
[FONT=Verdana] USER: 0x747C00000 [ 29.12 GB ][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0717[/FONT]
[FONT=Verdana] CODE: Merlot[/FONT]
[FONT=Verdana] TYPE: MODERN [RAPHAEL][/FONT]
[FONT=Verdana] RNID: 11F593C3EDF74E89FB0E58B187078626[/FONT]
[FONT=Verdana] MEID: 1AB176FD31DA6C481422291D28462663[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]USB: HIGH-SPEED[/FONT]
[FONT=Verdana]Boot done [1][/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Reading...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]Verify device config...[/FONT]
[FONT=Verdana]Ok[/FONT]
[FONT=Verdana]Loaders Ok[/FONT]
[FONT=Verdana]
[/FONT]
[FONT=Verdana]Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__1AB176FD31DA6C481422291D28462663[/FONT]
[FONT=Verdana][1] Process: RESET PROTECTION...[/FONT]
[FONT=Verdana]Format Ok: RESET PROTECTION[/FONT]
[FONT=Verdana][2] Verified[/FONT]
[FONT=Verdana][1] Verified[/FONT]
[FONT=Verdana][2] Verified[/FONT]
[FONT=Verdana]Done: 00:00:30[/FONT]
[FONT=Verdana]Reconnect Power/Cable now