السلام عليكم
والجهاز مقفل مع ضغط زري خفض ورفع الصوت وصله بالحاسوب
طراز جهازي كان RMX3261 لكن لم ينجح الا مع الطراز 3263
ايضا احتجت الى vpn
والجهاز مقفل مع ضغط زري خفض ورفع الصوت وصله بالحاسوب
طراز جهازي كان RMX3261 لكن لم ينجح الا مع الطراز 3263
ايضا احتجت الى vpn
كود:
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]1. Device must be Power off with battery inside[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]3. Insert usb cable[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]4. Install spd drivers if needed[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Connection : Flash Mode[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Brand : RealMe[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Model : Realme C21Y (RMX3263)[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Process : Format | Factory Reset[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Waiting for device port ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port found[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port : [ COM17 : SPRD U2S Diag ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshaking with device ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshake done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Protocol : SPRD3[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Detected SoC : Unisoc Tiger T610[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending config : OK[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot1] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot2] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]BootVersion : Spreadtrum Boot Block version 1.1[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Formatting Userdata please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Format userdata done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]UAT PRO : 147.02 | 27 - تشرين الأول - 2022 [ 04:04:07 م ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Elapsed Time : 1 minutes 5 seconds[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]1. Device must be Power off with battery inside[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]3. Insert usb cable[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]4. Install spd drivers if needed[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Connection : Flash Mode[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Brand : RealMe[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Model : Realme C21Y (RMX3263)[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]- Process : Format | FRP[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]====================================[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Waiting for device port ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port found[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Port : [ COM17 : SPRD U2S Diag ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshaking with device ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Handshake done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Protocol : SPRD3[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Detected SoC : Unisoc Tiger T610[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending config : OK[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot1] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Sending Boot [UAT PRO.boot2] : DONE[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]BootVersion : Spreadtrum Boot Block version 1.1[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Reseting Frp please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Reset Frp done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Formatting Userdata please wait ...[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Format userdata done[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]UAT PRO : 147.02 | 27 - تشرين الأول - 2022 [ 04:25:40 م ][/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]
[/FONT][/COLOR]
[COLOR=#FF0000][FONT=Almarai]Elapsed Time : 1 minutes 6 seconds[/FONT][/COLOR]