فيرموار هاتف سامسونغ a10s

cst_repair

cst_repair

:: عضو مميز ::
إنضم
2 يونيو 2013
المشاركات
280
مستوى التفاعل
370
النقاط
63
الإقامة
الجزائر الحبيبة
السلام عليكم و رحمة الله


اليكم اخوة الايمان فلاشة بصيغة سكاتر لهاتف سامسونغ SM-A107F A10S بحماية U8 مسحوبة ببوكس باندورة بعد ما تم فتح قفل FRP


BUKUP PARTITIONS

p_2134b47qv1.png
[/url][/IMG]


كود: 
Selected model: Samsung SM-A107F (Galaxy A10s)
[COLOR="#FF0000"]Operation: Read PTT[/COLOR]
Software version: 2.6

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM141 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM140 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xF347D9F5, 0x8DB9CFF1, 0xD7384638, 0x4F69BE1C
Get Chip ID... [MT6765]
Get SOC ID... [E3FE85D6097688C20158855C141FE89314DA2F8E0A7B0E0BFB191D45B272470B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D4203F1FED23327D9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_ID   : 0x150100514436334D4203F1FED23327D9
   EMMC_BOOT1: 0x0000400000 (4,00Mb)
   EMMC_BOOT2: 0x0000400000 (4,00Mb)
   EMMC_RPMB : 0x0001000000 (16,00Mb)
   EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232,00Kb)
   EXT_RAM : 0x0080000000 (2,00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read product info... OK[COLOR="#FF0000"]
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A107F
Product Name         : a10sxx
Product Device       : a10s
Board Platform       : MT6765
Product Board        : S96116CA1
Build ID             : QP1A.190711.020
Build Date           : Thu Mar 25 09:27:15 KST 2021
Display ID           : QP1A.190711.020.A107FXXU8BUC2
Security Patch       : 2021-04-01
Version SDK          : 29
Version Release      : 10
Version Codename     : REL[/COLOR]
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "efuse"... OK
Read partition "nvram"... OK
Read partition "efs"... OK
Read partition "sec_efs"... OK
Read partition "bota"... OK
Read partition "param"... OK
Read partition "up_param"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "persist"... OK
Read partition "persistent"... OK
Read partition "misc"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "md1img"... OK
Read partition "spmfw"... OK
Read partition "scp1"... OK
Read partition "sspm_1"... OK
Read partition "lk"... OK
Read partition "steady"... OK
Read partition "boot"... OK
Read partition "recovery"... OK
Read partition "dtbo"... OK
Read partition "tee1"... OK
Read partition "vendor"... OK
Read partition "product"... OK
Read partition "system"... OK
Read partition "vbmeta"... OK
Read partition "cache"... OK
Read partition "omr"... OK
Read partition "sgpt"... OK
Saved to PND_LINK_008A "file:///C:/Program%20Files/Z3X/Pandora/Backup/MTK/Samsung_SM-A107F%20(Galaxy%20A10s)/DUMP_PARTITIONS_(2021-11-3_11-57-33)/"backup_directory
Dumping Partitions done!


RESET FRP


p_2134dxp3t1.png
[/url][/IMG]


READ RPMB


كود: 
Selected model: Samsung SM-A107F (Galaxy A10s)
Operation: Read RPMB
Software version: 2.6

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM141 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM140 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xF347D9F5, 0x8DB9CFF1, 0xD7384638, 0x4F69BE1C
Get Chip ID... [MT6765]
Get SOC ID... [E3FE85D6097688C20158855C141FE89314DA2F8E0A7B0E0BFB191D45B272470B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [23]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100514436334D4203F1FED23327D9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_ID   : 0x150100514436334D4203F1FED23327D9
   EMMC_BOOT1: 0x0000400000 (4,00Mb)
   EMMC_BOOT2: 0x0000400000 (4,00Mb)
   EMMC_RPMB : 0x0001000000 (16,00Mb)
   EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232,00Kb)
   EXT_RAM : 0x0080000000 (2,00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Read product info... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A107F
Product Name         : a10sxx
Product Device       : a10s
Board Platform       : MT6765
Product Board        : S96116CA1
Build ID             : QP1A.190711.020
Build Date           : Thu Mar 25 09:27:15 KST 2021
Display ID           : QP1A.190711.020.A107FXXU8BUC2
Security Patch       : 2021-04-01
Version SDK          : 29
Version Release      : 10
Version Codename     : REL
Read Write Counter[WC][MAX=0xFFFFFFFF]... 7535  OK
Reading RPMB... OK
Saved to PND_LINK_0065 "file:///C:/Program%20Files/Z3X/Pandora/Backup/MTK/Samsung_SM-A107F%20(Galaxy%20A10s)/"backup_directory
Read RPMB done!



وهدا رابط تحميل الملفات مع العلم ان كل العمليات تتم بدون TEST POINT فقط باضغط على زر زيادة و تخفيض الصوت و وصل CABLE USB


http://https://mega.nz/file/lNsT3QKJ#ZRmp_3xTQ_kvSyqfgB_Y13BC9SSn_vlQ2DeJXIEryLI
 
التعديل الأخير:
MS-GSM

MS-GSM

:: عضو محترف ::
إنضم
27 فبراير 2016
المشاركات
2,440
مستوى التفاعل
679
النقاط
0
الإقامة
Oran
رد: فيرموار هاتف سامسونغ a10s

بارك الله فيك أخي على مشاركة الفلاشة.
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
أعلى