PHONE REPAIR
عضو نشط
- إنضم
- 8 جويلية 2020
- المشاركات
- 76
- مستوى التفاعل
- 10
- النقاط
- 0
السلام عليكم
محاولة تفليش galaxy s8 pro صيني فاقد بوت ..على cm2
Card found : F7A72602 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21
Load IDBase v21168 Ok!
Operation : Identify [ v2.21 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
اين المشكل؟
Card found : F7A72602 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21
Load IDBase v21168 Ok!
Operation : Identify [ v2.21 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : S8 Pro
Device Model : S8 Pro
Device CPU : MT6580
Device IntName : S8 Pro
Device Version : 6.1
Device Compile : 16/01/2018 07:41:20
Device Project : ALPS.L1.MP6.V2_YUANDA6580.WE.L
Device ExtInfo : S8 Pro
Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_yuanda6580_we_l.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR2 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 1.00 GB ]
EMI : [01] : eMMC : DDR2 : ID : 1501004B4C4C30304D : VEN : SAMSUNG | DEV : KLL00M : RAM : [ 1.00 GB ]
EMI : [02] : eMMC : DDR2 : ID : 90014A2058494E5948 : VEN : HYNIX | DEV : XINYH : RAM : [ 1.00 GB ]
EMI : [03] : eMMC : DDR2 : ID : 90014A483447316404 : VEN : HYNIX | DEV : H4G1d : RAM : [ 1.00 GB ]
EMI : [04] : eMMC : DDR2 : ID : 110100303034474530 : VEN : TOSHIBA | DEV : 004GE0 : RAM : [ 1.00 GB ]
EMI : [05] : eMMC : DDR2 : ID : 7001004D4D43303447 : VEN : KINGSTON | DEV : MMC04G : RAM : [ 1.00 GB ]
EMI : [06] : eMMC : DDR2 : ID : 1501004B4A5330304D : VEN : SAMSUNG | DEV : KJS00M : RAM : [ 1.00 GB ]
EMI : [07] : eMMC : DDR2 : ID : 45010053454D303447 : VEN : SANDISK | DEV : SEM04G : RAM : [ 1.00 GB ]
Operation : Write Flash [ v2.21 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :9
[FL] : Set : preloader_yuanda6580_we_l.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x5351766B [ 1.30 GB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
محاولة تفليش galaxy s8 pro صيني فاقد بوت ..على cm2
Card found : F7A72602 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21
Load IDBase v21168 Ok!
Operation : Identify [ v2.21 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
اين المشكل؟
Card found : F7A72602 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21
Load IDBase v21168 Ok!
Operation : Identify [ v2.21 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : S8 Pro
Device Model : S8 Pro
Device CPU : MT6580
Device IntName : S8 Pro
Device Version : 6.1
Device Compile : 16/01/2018 07:41:20
Device Project : ALPS.L1.MP6.V2_YUANDA6580.WE.L
Device ExtInfo : S8 Pro
Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_yuanda6580_we_l.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR2 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 1.00 GB ]
EMI : [01] : eMMC : DDR2 : ID : 1501004B4C4C30304D : VEN : SAMSUNG | DEV : KLL00M : RAM : [ 1.00 GB ]
EMI : [02] : eMMC : DDR2 : ID : 90014A2058494E5948 : VEN : HYNIX | DEV : XINYH : RAM : [ 1.00 GB ]
EMI : [03] : eMMC : DDR2 : ID : 90014A483447316404 : VEN : HYNIX | DEV : H4G1d : RAM : [ 1.00 GB ]
EMI : [04] : eMMC : DDR2 : ID : 110100303034474530 : VEN : TOSHIBA | DEV : 004GE0 : RAM : [ 1.00 GB ]
EMI : [05] : eMMC : DDR2 : ID : 7001004D4D43303447 : VEN : KINGSTON | DEV : MMC04G : RAM : [ 1.00 GB ]
EMI : [06] : eMMC : DDR2 : ID : 1501004B4A5330304D : VEN : SAMSUNG | DEV : KJS00M : RAM : [ 1.00 GB ]
EMI : [07] : eMMC : DDR2 : ID : 45010053454D303447 : VEN : SANDISK | DEV : SEM04G : RAM : [ 1.00 GB ]
Operation : Write Flash [ v2.21 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :9
[FL] : Set : preloader_yuanda6580_we_l.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : recovery.img
[FL] : Set : logo.bin
[FL] : Set : secro.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x5351766B [ 1.30 GB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek DA USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!
Reconnect Power/Cable!
