تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها الكرام
تتمة للموضوع السابق: الطريقة الصحيحة لبرمجة ذاكرة "هاتف حامل للمعالج MTK" على Medusa Pro
اقدم لكم
برمجة ذاكرة eMMC لهاتف LG K11 Plus LM-X410ZCW من عائلة MTK على الـ Medusa Pro
تم استلام هاتف LG K11 Plus لا يشتغل " انطفاء بدون اي سبب. على قول الزبون"
بعد المعاينة. كل شيئ بخير... تم اتهام الـ eMMC ... بعدها رفع الـ eMMC و ربطه مع الـ Medusa Pro... تبيين ان الـ eMMC تالف
كود:
[LEFT]Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
[COLOR="#FF0000"]Device : Unknown eMMC 16???[/COLOR]
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
[COLOR="#FF0000"]CID : 0600003136FFFFFFFFFF195C493934EB[/COLOR]
Manufacturer ID : 0X06
Device/BGA : Device (removable)
OEM/Application ID : 0X00
Product name : 16???
Product revision : 15.15
Product serial number : (hex) 195C4939
Manufacturing date : 03/2017
---------------------------------------------------------------
CSD Info
CSD : 904F012A0F5903FFF6DBFFEF8A400099
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 40 ms
TRAN speed : 20 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 10174464 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file F:/Medusa Pro Software/EXT_CSD Backups/16???_07_01_2021_12_41_18.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Samsung eMMC only supports smart report operation!
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.1.8; FW: 1.24.[/LEFT]
هنا بدا العمل. من تحضير لـ eMMC سليم متوافق مع ملف الـ preloader ومعرفة طراز الهاتف....
تم التوصل الى طراز الهاتف من خلال الرقم الايمي المكتوب تحت غطاء.
تم تحميل الـ Firmware.*kdz احدث اصدار حسب الطراز و استخراج ملف الـ preloader.bin
كود:
[LEFT][B][SIZE=2][COLOR="#EE82EE"]Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Opened input file: C:/Users/Sebti Gsm/Desktop/LG K11+/preloader_0.bin
Found 8 eMMC supported CID:
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : GX6BMB
eMMC CID : 150100475836424D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QX13MB
eMMC CID : 150100515831334D42
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HAG4a2
eMMC CID : 90014A484147346132
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QE63MB
eMMC CID : 150100514536334D42
[COLOR="#FF0000"]eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HBG4a2
eMMC CID : 90014A484247346132[/COLOR]
eMMC Vendor ID : 13 (Micron eMMC)
eMMC Model ID : 4E01
eMMC Name : S0J9B7
eMMC CID : 13014E53304A394237
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QX63MB
eMMC CID : 150100515836334D42
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : hB8aP
eMMC CID : 90014A68423861503E[/COLOR][/SIZE][/B][/LEFT]
الذاكرة البديلة المتوفرة عندي
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HBG4a2
eMMC CID : 90014A484247346132
على الـ Medusa Pro نعمل Full Erase للذاكرة تم كتابة ملف EXT_CSD
ثم كتابة الـ Firmware.*kdz عبر خاصية Factory repair
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Opened input file: C:/Users/Sebti Gsm/Desktop/LG K11+/preloader_0.bin
Found 8 eMMC supported CID:
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : GX6BMB
eMMC CID : 150100475836424D42
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QX13MB
eMMC CID : 150100515831334D42
[COLOR="#0000FF"]eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HAG4a2
eMMC CID : 90014A484147346132[/COLOR]
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QE63MB
eMMC CID : 150100514536334D42
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : HBG4a2
eMMC CID : 90014A484247346132
eMMC Vendor ID : 13 (Micron eMMC)
eMMC Model ID : 4E01
eMMC Name : S0J9B7
eMMC CID : 13014E53304A394237
eMMC Vendor ID : 15 (Samsung eMMC)
eMMC Model ID : 0001
eMMC Name : QX63MB
eMMC CID : 150100515836334D42
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : hB8aP
eMMC CID : 90014A68423861503E
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : [COLOR="#0000FF"]Hynix eMMC HBG4a2[/COLOR]
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
[COLOR="#0000FF"]CID : 90014A48424734613[/COLOR]2D4291985FCC40D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HBG4a2
Product revision : 13.4
Product serial number : (hex) 291985FC
Manufacturing date : 12/2017
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
[COLOR="#0000FF"][COLOR="#FF0000"][COLOR="#0000FF"]Partition config[/COLOR][/COLOR][/COLOR] [COLOR="#FF0000"] : (0x38) 00111000[/COLOR]
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15265792 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file F:/Medusa Pro Software/EXT_CSD Backups/HBG4a2_07_01_2021_13_42_07.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT (00000000, 00000022) 17 KB
P01: sbl1 (00000022, 00000400) 512 KB
P02: rpm (00000422, 00000400) 512 KB
P03: tz (00000822, 00001000) 2048 KB
P04: devcfg (00001822, 00000200) 256 KB
P05: dsp (00001A22, 00008000) 16 MB
P06: keystore (00009A22, 00000400) 512 KB
P07: frp (00009E22, 00000400) 512 KB
P08: mota (0000A222, 00000400) 512 KB
P09: dip (0000A622, 00000800) 1024 KB
P10: syscfg (0000AE22, 00000400) 512 KB
P11: lksecapp (0000B222, 00000100) 128 KB
P12: apdp (0000B322, 00000200) 256 KB
P13: msadp (0000B522, 00000200) 256 KB
P14: dpo (0000B722, 00000010) 8 KB
P15: fsc (0000B732, 00000002) 1024 b
P16: ssd (0000B734, 00000010) 8 KB
P17: bootfail_info (0000B744, 00001000) 2048 KB
P18: pad0 (0000C744, 000038BC) 7.092 MB
P19: aboot (00010000, 00002000) 4 MB
P20: cmnlib (00012000, 00000800) 1024 KB
P21: cmnlib64 (00012800, 00000800) 1024 KB
P22: keymaster (00013000, 00000800) 1024 KB
P23: pad1 (00013800, 00005400) 10.5 MB
P24: fsg (00018C00, 00002000) 4 MB
P25: DDR (0001AC00, 00000040) 32 KB
P26: sec (0001AC40, 00000020) 16 KB
P27: devinfo (0001AC60, 00000800) 1024 KB
P28: limits (0001B460, 00000040) 32 KB
P29: pad2 (0001B4A0, 00004B60) 9.422 MB
P30: oeminfo (00020000, 00020000) 64 MB
P31: misc (00040000, 00002000) 4 MB
P32: modemst1 (00042000, 00002000) 4 MB
P33: modemst2 (00044000, 00002000) 4 MB
P34: rrecord (00046000, 00004000) 8 MB
P35: nff (0004A000, 00004000) 8 MB
P36: mcfg (0004E000, 00002000) 4 MB
P37: modem (00050000, 00030000) 96 MB
P38: erecovery_kernel (00080000, 0001C000) 56 MB
P39: erecovery_ramdisk (0009C000, 00010000) 32 MB
P40: erecovery_vendor (000AC000, 00008000) 16 MB
P41: kernel (000B4000, 0001C000) 56 MB
P42: ramdisk (000D0000, 00008000) 16 MB
P43: recovery_ramdisk (000D8000, 00010000) 32 MB
P44: recovery_vendor (000E8000, 00008000) 16 MB
P45: cache (000F0000, 00040000) 128 MB
P46: odm (00130000, 00010000) 32 MB
P47: persist (00140000, 00010000) 32 MB
P48: log (00150000, 00020000) 64 MB
P49: patch (00170000, 00010000) 32 MB
P50: version (00180000, 00010000) 32 MB
P51: vendor (00190000, 00130000) 608 MB
P52: product (002C0000, 00060000) 192 MB
P53: cust (00320000, 00060000) 192 MB
P54: system (00380000, 00520000) 2624 MB
P55: userdata (008A0000, 0319DFDF) 24.81 GB
Backuping fsg partition...
Opening F:/Medusa Pro Software/Backups/HBG4a2_fsg_0x18c00_0x2000_07_01_2021_13_42_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.8; FW: 1.24.
Backuping oeminfo partition...
Opening F:/Medusa Pro Software/Backups/HBG4a2_oeminfo_0x20000_0x20000_07_01_2021_13_42_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:25
SW: 2.1.8; FW: 1.24.
Backuping modemst1 partition...
Opening F:/Medusa Pro Software/Backups/HBG4a2_modemst1_0x42000_0x2000_07_01_2021_13_42_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.8; FW: 1.24.
Backuping modemst2 partition...
Opening F:/Medusa Pro Software/Backups/HBG4a2_modemst2_0x44000_0x2000_07_01_2021_13_42_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.1.8; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 3670016
Number of sectors : 5373952
Build ID : OPR6.170623.013
Display Build ID : System 8.0.0.073(01EG)
Release ID : 8.0.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : generic_a53-user 8.0.0 OPR6.170623.013 eng.root.20190920.191934 test-keys
---------------------------------------------------------------
[COLOR="#FF0000"]Erasing[/COLOR]. [COLOR="#0000FF"]Please wait...[/COLOR] [COLOR="#008000"]Done[/COLOR].
SW: 2.1.8; FW: 1.24.
Writing EXT_CSD succesfully complete!
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HBG4a2
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
[COLOR="#0000FF"]CID : 90014A484247346132[/COLOR]D4291985FCC40D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HBG4a2
Product revision : 13.4
Product serial number : (hex) 291985FC
Manufacturing date : 12/2017
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
[COLOR="#FF0000"][COLOR="#0000FF"]Partition config[/COLOR] :[/COLOR] [COLOR="#008000"](0x48) 01001000[/COLOR]
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15265792 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file F:/Medusa Pro Software/EXT_CSD Backups/HBG4a2_07_01_2021_13_46_11.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
Opening C:/Users/Sebti Gsm/Desktop/LG K11+/[COLOR="#0000FF"]X410ZCW10c_00_OPEN_AME_DS_OP_0131.kdz[/COLOR] file...
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition preloader... [COLOR="#008000"]Done[/COLOR].
Switched to user area.
Writing partition pgpt... [COLOR="#008000"]Done[/COLOR].
Writing partition lk... [COLOR="#008000"]Done[/COLOR].
Writing partition lk2... [COLOR="#008000"]Done[/COLOR].
Writing partition laf... [COLOR="#008000"]Done[/COLOR].
Writing partition lafbak... [COLOR="#008000"]Done[/COLOR].
Writing partition boot... [COLOR="#008000"]Done[/COLOR].
Writing partition recovery... [COLOR="#008000"]Done[/COLOR].
Writing partition logo... [COLOR="#008000"]Done[/COLOR].
Writing partition lo_bak_go... [COLOR="#008000"]Done[/COLOR].
Writing partition secro... [COLOR="#008000"]Done[/COLOR].
Writing partition tee1... [COLOR="#008000"]Done[/COLOR].
Writing partition tee2... [COLOR="#008000"]Done[/COLOR].
Writing partition encrypt...[COLOR="#008000"] Done[/COLOR].
Writing partition rct...[COLOR="#008000"] Done[/COLOR].
Writing partition factory... [COLOR="#008000"]Done[/COLOR].
Writing partition efuse... [COLOR="#008000"]Done[/COLOR].
Writing partition md1img...[COLOR="#008000"] Done[/COLOR].
Writing partition md1dsp... [COLOR="#008000"]Done[/COLOR].
Writing partition md1arm7... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition system... [COLOR="#008000"]Done[/COLOR].
Writing partition sgpt... [COLOR="#008000"]Done[/COLOR].
Switched to user area.
Writing partition OP_T... [COLOR="#008000"]Done[/COLOR].
Writing partition OP_T... [COLOR="#008000"]Done[/COLOR].
[COLOR="#008000"]Writing is finished.[/COLOR]
SW: 2.1.8; FW: 1.24.
[COLOR="#FF0000"]Disconnected.[/COLOR]
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC HBG4a2
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
[COLOR="#0000FF"]CID : 90014A484247346132[/COLOR]D4291985FCC40D
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : HBG4a2
Product revision : 13.4
Product serial number : (hex) 291985FC
Manufacturing date : 12/2017
---------------------------------------------------------------
CSD Info
CSD : D02701328F5903FFFFFFFFE78A400017
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
[COLOR="#FF0000"][COLOR="#0000FF"]Partition config[/COLOR] :[/COLOR] [COLOR="#008000"](0x48) 01001000[/COLOR]
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15265792 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file F:/Medusa Pro Software/EXT_CSD Backups/HBG4a2_07_01_2021_14_16_07.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: misc2 (00001C00, 00004000) 8 MB
P03: ftm (00005C00, 00004000) 8 MB
P04: nvram (00009C00, 00002800) 5 MB
P05: spare1 (0000C400, 00003C00) 7.5 MB
P06: protect1 (00010000, 00004000) 8 MB
P07: protect2 (00014000, 00004000) 8 MB
P08: lk (00018000, 00000800) 1024 KB
P09: lk2 (00018800, 00000800) 1024 KB
P10: laf (00019000, 0000E000) 28 MB
P11: lafbak (00027000, 0000E000) 28 MB
P12: para (00035000, 00000400) 512 KB
P13: boot (00035400, 00008C00) 17.5 MB
P14: recovery (0003E000, 00009800) 19 MB
P15: recoverybak (00047800, 00009800) 19 MB
P16: logo (00051000, 00004000) 8 MB
P17: lo_bak_go (00055000, 00004000) 8 MB
P18: spare2 (00059000, 00002000) 4 MB
P19: expdb (0005B000, 00005000) 10 MB
P20: seccfg (00060000, 00004000) 8 MB
P21: oemkeystore (00064000, 00004000) 8 MB
P22: secro (00068000, 00003000) 6 MB
P23: keystore (0006B000, 00004000) 8 MB
P24: tee1 (0006F000, 00002800) 5 MB
P25: tee2 (00071800, 00002800) 5 MB
P26: eksst (00074000, 00000400) 512 KB
P27: encrypt (00074400, 00000400) 512 KB
P28: persist_lg (00074800, 00004000) 8 MB
P29: mpt (00078800, 0000B000) 22 MB
P30: lgfota (00083800, 00005000) 10 MB
P31: rct (00088800, 00000800) 1024 KB
P32: factory (00089000, 0001C000) 56 MB
P33: persist (000A5000, 00018000) 48 MB
P34: efuse (000BD000, 00000400) 512 KB
P35: spare3 (000BD400, 00001000) 2048 KB
P36: nvcfg (000BE400, 00004000) 8 MB
P37: nvdata (000C2400, 00010000) 32 MB
P38: metadata (000D2400, 00010000) 32 MB
P39: md1img (000E2400, 0000C000) 24 MB
P40: md1dsp (000EE400, 00002000) 4 MB
P41: md1arm7 (000F0400, 00001800) 3072 KB
P42: md3img (000F1C00, 00002800) 5 MB
P43: frp (000F4400, 00004000) 8 MB
P44: spare4 (000F8400, 00003C00) 7.5 MB
P45: system (000FC000, 007C0000) 3968 MB
P46: cache (008BC000, 00100000) 512 MB
P47: OP (009BC000, 003A8000) 1872 MB
P48: userdata (00D64000, 00FB2C00) 7.849 GB
P49: flashinfo (FFFF0084, FFFFFFFF00017F7D) 1.718e+10 GB
---------------------------------------------------------------
Searching [COLOR="#0000FF"]Android build[/COLOR] info...
Ok
[COLOR="#008000"]Disk/Image size[/COLOR] [COLOR="#0000FF"]: 47c00000 bytes[/COLOR]
[COLOR="#008000"]Device sector size[/COLOR] [COLOR="#0000FF"] : 512 bytes[/COLOR]
[COLOR="#008000"]Partition offset[/COLOR] :[COLOR="#0000FF"] 1032192[/COLOR]
[COLOR="#008000"]Number of sectors[/COLOR] [COLOR="#0000FF"]: 8126464[/COLOR]
[COLOR="#008000"]Device Manufacturer[/COLOR] [COLOR="#0000FF"]: lge[/COLOR]
[COLOR="#008000"]Device Platform[/COLOR] [COLOR="#0000FF"]: mt6750[/COLOR]
[COLOR="#008000"]Build ID[/COLOR] [COLOR="#0000FF"]: N2G47H[/COLOR]
[COLOR="#008000"]Display Build ID[/COLOR] [COLOR="#0000FF"]: N2G47H[/COLOR]
[COLOR="#008000"]Release ID[/COLOR] [COLOR="#0000FF"]: 7.1.2[/COLOR]
[COLOR="#008000"]Device Model[/COLOR] [COLOR="#0000FF"]: LM-X410[/COLOR]
[COLOR="#008000"]Device Nam[/COLOR]e [COLOR="#0000FF"]: mcv3_lao_com[/COLOR]
[COLOR="#008000"]Architecture ABI[/COLOR] [COLOR="#0000FF"]: armeabi-v7a[/COLOR]
[COLOR="#008000"]Architecture ABI2[/COLOR] [COLOR="#0000FF"]: armeabi[/COLOR]
[COLOR="#008000"]Architecture ABI List[/COLOR] [COLOR="#0000FF"]: armeabi-v7a,armeabi[/COLOR]
[COLOR="#008000"]Build Description[/COLOR] [COLOR="#0000FF"]: mcv3_lao_com-user 7.1.2 N2G47H 19031173255a5 release-keys[/COLOR]
---------------------------------------------------------------[/SIZE][/B][/LEFT]