تم بعون الله. تصليح بوت العنيد iRisPad G7020 MT6572 على Medusa Pro مع حل مشكل boot errer
Direct ISP
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.1.3.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Generic EMV Smartcard Reader 0
[COLOR="#FF0000"]Please disconnect battery and USB cable.[/COLOR]
[COLOR="#0000FF"]Model Settings:[/COLOR]
Interface : [COLOR="#008000"]eMMC[/COLOR]
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
[COLOR="#0000FF"]Connecting...[/COLOR]
Device : [COLOR="#008000"]Foresee eMMC NCard[/COLOR]
Page size : [COLOR="#008000"]512 B[/COLOR]
Block size : [COLOR="#008000"]512 B[/COLOR]
Block count : [COLOR="#008000"]15140864[/COLOR]
Size : [COLOR="#008000"]7.22 GB (7393.00 MB[/COLOR])
---------------------------------------------------------------
[COLOR="#0000FF"]CID Info
[/COLOR]
CID : 8801034E436172642026DCA090563391
Manufacturer ID : 0X88
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X03
Product name : NCard
Product revision : 2.6
Product serial number : (hex) DCA09056
Manufacturing date : 03/2016
---------------------------------------------------------------
CSD Info
CSD : D0FFFF320F5903FFFFFFFFE7964000EB
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR="#0000FF"]EXTCSD Info[/COLOR]
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : [COLOR="#008000"]512 Kbytes[/COLOR]
Boot1 size : [COLOR="#008000"]4096 Kbytes[/COLOR]
Boot2 size : [COLOR="#008000"]4096 Kbytes[/COLOR]
RPMB size : [COLOR="#008000"]4096 Kbytes[/COLOR]
Partition config : [COLOR="#008000"](0x48) 01001000[/COLOR]
Boot partition enable : [COLOR="#008000"]Boot partition 1
(Bus width = 1Bit)[/COLOR]
Boot ACK : [COLOR="#008000"]Boot acknowledge sent during boot operation Bit[/COLOR]
Boot bus conditions : [COLOR="#008000"](0x00) 00000000[/COLOR]
Boot bus width :[COLOR="#008000"] x1 (sdr) or x4 (ddr) bus width in boot operation mode (default[/COLOR])
Reset boot bus conditions : [COLOR="#008000"]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default[/COLOR])
Boot mode : [COLOR="#008000"]Use single data rate + backward compatible timings in boot operation (default[/COLOR])
RST_n function : [COLOR="#008000"](0x01) RST_n signal is permanently enabled[/COLOR]
Partitioning support : [COLOR="#008000"]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR="#008000"]Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 1048576 Kbytes[/COLOR]
Partitions attribute : [COLOR="#008000"]0x0[/COLOR]
Part setting completed: [COLOR="#008000"]0x0[/COLOR]
GP partition 1 size :[COLOR="#008000"] 0 b[/COLOR]
GP partition 2 size : [COLOR="#008000"]0 b[/COLOR]
GP partition 3 size : [COLOR="#008000"]0 b[/COLOR]
GP partition 4 size :[COLOR="#008000"] 0 b[/COLOR]
Enhanced area size : [COLOR="#008000"](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR="#008000"](0x0) 0 b[/COLOR]
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/NCard_19_10_2020_14_38_50.bin.
[COLOR="#006400"]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]SW: 2.1.3; FW: 1.24.[/COLOR]
P00: EXT2FS (000B1A00, 00190000) 800 MB
P01: EXT2FS (00241A00, 00071000) 226 MB
P02: EXT2FS (00004800, 00005000) 10 MB
P03: EXT2FS (00009800, 00005000) 10 MB
P04: EXT2FS (00016A00, 00096000) 300 MB
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------Opening C:/Users/Sebti Gsm/Desktop/Foresee eMMC NCard_19_10_2020_14_39_28.bin file...
Reading. Please wait... Done.
Elapsed time 00:01:36
SW: 2.1.3; FW: 1.24.
---------------------------------------------------------------
[COLOR="#0000FF"]Selected scatter file[/COLOR]: I:/iRis Sat/G7020/MT6572 mt8312ca/G7020 MT6572__alps__d716__d716__4.4.2__ALPS.KK1.MP6.V1/G7020 [COLOR="#0000FF"]MT6572__alps__d716__d716__4.4.2__ALPS.KK1.MP6.V1/MT6572_Android_scatter.txt[/COLOR].
Scatter file type 2.
Opened input file: I:/iRis Sat/G7020/MT6572 mt8312ca/G7020 MT6572__alps__d716__d716__4.4.2__ALPS.KK1.MP6.V1/G7020 MT6572__alps__d716__d716__4.4.2__ALPS.KK1.MP6.V1/preloader_d716.bin
No eMMC descriptions found.
Writing. Please wait...
Switched to boot area partition 1.
[COLOR="#0000FF"]Writing[/COLOR] partition [COLOR="#FF0000"]PRELOADER[/COLOR]...
Write data verification is enabled.
[COLOR="#008000"]Done.[/COLOR]
Switched to user area.
Writing partition MBR... [COLOR="#008000"]Done[/COLOR].
Writing partition EBR1... [COLOR="#008000"]Done[/COLOR].
Writing partition UBOOT... [COLOR="#008000"]Done[/COLOR].
Writing partition BOOTIMG... [COLOR="#008000"]Done[/COLOR].
Writing partition RECOVERY... [COLOR="#008000"]Done[/COLOR].
Writing partition SEC_RO... [COLOR="#008000"]Done[/COLOR].
Writing partition LOGO... [COLOR="#008000"]Done[/COLOR].
Writing partition EBR2... [COLOR="#008000"]Done[/COLOR].
Writing partition CUSTOM... [COLOR="#008000"]Done[/COLOR].
Writing partition ANDROID... [COLOR="#008000"]Done[/COLOR].
Writing partition CACHE... [COLOR="#008000"]Done[/COLOR].
Writing partition USRDATA... [COLOR="#008000"]Done[/COLOR].
Writing checksums...[COLOR="#008000"]Done[/COLOR].
[COLOR="#0000FF"]Writing finished.[/COLOR]
[COLOR="#0000FF"]SW: 2.1.3; FW: 1.24.[/COLOR]
[COLOR="#FF0000"]Disconnected.[/COLOR]
[/SIZE][/B][/LEFT]ضمن مرفوعات الحصرية على السيبورت وعلى المنتدى المدفوع (team.dzgsm)
ممنوع منعاً باتاً ، طلب الملفات على الخاص:icon30:
لمزيد من المعلومات عن السيبورت
https://www.facebook.com/DZGSMSupport/
بالتوفيق للجميع إن شاء الله
والله ولي التوفيق
