Core
Changed : FlashCore Protocol updated
تحديثات على الواجهة
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
دعم المعالجات اعلاها
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased
زيادة سرعه العمليات بوضع FlashMode
Flasher
واجة التفليش
Changed : Flash Engine updated
تحديث الية التفليش
Changed : FastFlash protocol updated
تحديثات على الية التفليش السريع
Service
العمليات
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
معالجة الاشكال في تفحص ملفات النظام للاجهزة بمعالجات اس بي دي القديمة
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
تغييرات على الية الكشف والتوجيهات حيث تمت اعادة بناء الية الكشف وتحديث قاعدة البيانات
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
معالجة مشكلة توقف البرنامج عند قراءة قفل المستخدم لبعض الاجهزة
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
دعم قراءة قفل المستخدم الخاص بقفل ضد السرقه
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices
معالجة الاشكال في تهيئة ملفات النظام بوضع Diag للانظمة 10 و9
Firmware Reader
قارئ الفلاشات
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved
Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated
Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases
كلمة السر لفك الظغط
12345678
التنزيل من هنا
http://dl1.infinity-box.com/00/pub.php?dir=software/
او
http://tmp2.infinity-box.biz/00/
Changed : FlashCore Protocol updated
تحديثات على الواجهة
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
دعم المعالجات اعلاها
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased
زيادة سرعه العمليات بوضع FlashMode
Flasher
واجة التفليش
Changed : Flash Engine updated
تحديث الية التفليش
Changed : FastFlash protocol updated
تحديثات على الية التفليش السريع
Service
العمليات
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
معالجة الاشكال في تفحص ملفات النظام للاجهزة بمعالجات اس بي دي القديمة
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
تغييرات على الية الكشف والتوجيهات حيث تمت اعادة بناء الية الكشف وتحديث قاعدة البيانات
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
معالجة مشكلة توقف البرنامج عند قراءة قفل المستخدم لبعض الاجهزة
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
دعم قراءة قفل المستخدم الخاص بقفل ضد السرقه
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices
معالجة الاشكال في تهيئة ملفات النظام بوضع Diag للانظمة 10 و9
Firmware Reader
قارئ الفلاشات
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved
Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated
Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases
كلمة السر لفك الظغط
12345678
التنزيل من هنا
http://dl1.infinity-box.com/00/pub.php?dir=software/
او
http://tmp2.infinity-box.biz/00/