السلام عليكم و رحمة الله تعالى و بركاته
بيانات التاب
تم بحمد الله سحب فلاشة تاب mpman mpdc8_bt على العملاق CM2RKT اصدار اندرويد 4.1.1 بتاريخ 04032013
رقم البوردة : TVE811S TF_CARD V1.0 2012.09.06
رقم البوردة : TVE811S TF_CARD V1.0 2012.09.06
بيانات التاب
كود:
[LEFT]Operation : Identify [ v2.01 ]
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Device mode : Normal [ LOADER OPEN ]
Machine : [SIZE=4][COLOR=#0000FF]RK3066[/COLOR][/SIZE]
Connect Ok!
Brand : MPMAN
ProdName : rk30sdk
[COLOR=#0000FF]ProdModel : [SIZE=4][COLOR=#FF0000]MPDC8 BT[/COLOR][/SIZE][/COLOR]
Device : rk30sdk
[COLOR=#0000FF]AndroidVer: [SIZE=4][COLOR=#FF0000]4.1.1[/COLOR][/SIZE][/COLOR]
Manufact. : MPMAN
SysPatch : JRO03H
RKTxCPU : RK30XX
Done!
Elapsed: 00:00:02[/LEFT]بيانات سحب الفلاشة
كود:
[LEFT]Operation : Read Firmware [ v2.01 ]
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Device mode : Normal [ LOADER OPEN ]
Machine : RK3066
Device : MPDC8 BT
ExtInfo : 4.1.1
SoC CPU : 300A
SoC PDT : 2011
SoC SWN : 1111
SoC REV : V101
Flash CSx : 0x00
Flash Type : ADD794DA74 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000100000000 ( 4,00 GiB )
Flash Info : 2097152/8192/30/40/1
Connect Ok!
Brand : MPMAN
ProdName : rk30sdk
ProdModel : MPDC8 BT
Device : rk30sdk
AndroidVer: 4.1.1
Manufact. : MPMAN
SysPatch : JRO03H
RKTxCPU : RK30XX
[COLOR=#0000FF]DevInfo : [SIZE=4][COLOR=#FF0000]RK30XX__MPMAN__MPMAN__ANDR_v4.1.1__MPDC8_BT__rk30sdk__rk30sdk[/COLOR][/SIZE][/COLOR]
Reading Flash Content ...
[Read Ok] : param.cfg
[Read Ok] : misc.img
[Read Ok] : kernel.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : backup.img
[Read Ok] : system.img
Android Info saved!
Read finished!
Configuration : RK3066 / ADD794DA74 [ NAND ]
Firmware Size : 937 MiB
Done!
Elapsed: 00:03:37[/LEFT]بيانات اخراج التاب من وضع التفليش
كود:
[LEFT]Operation : Reboot Device [ v2.01 ]
----- > Phone/Tablet :
1. Power Off device
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable! Press 'POWER_ON' button for a few second!
----- > IoT/Box :
1. Reset device power
2. PRESS and HOLD 'RESET' KEY!
3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!
Wait for device ...
Device Connected!
Interface test : Passed
Device mode : Normal [ LOADER OPEN ]
Machine : RK3066
Device : MPDC8 BT
ExtInfo : 4.1.1
SoC CPU : 300A
SoC PDT : 2011
SoC SWN : 1111
SoC REV : V101
Flash CSx : 0x00
Flash Type : ADD794DA74 [ NAND ]
Flash Vend : HYNIX
Flash Size : 0x0000000100000000 ( 4,00 GiB )
Flash Info : 2097152/8192/30/40/1
Connect Ok!
Done!
Elapsed: 00:00:00[/LEFT]ادخال التاب لوضع التفليش
تركيب الكابل في الكمبيوتر الضغط على زر التشغيل مع ضغط متكرر على زر خفض الصوت
بالتوفيق
تركيب الكابل في الكمبيوتر الضغط على زر التشغيل مع ضغط متكرر على زر خفض الصوت
بالتوفيق
التعديل الأخير:
