- إنضم
- 21 أبريل 2013
- المشاركات
- 913
- مستوى التفاعل
- 3,089
- النقاط
- 93
السلام عليكم اخوتي الكرام
ارجو المساعدة في فلاشة هاتف mate 20 pro مقلد
بيانات الفلاشة
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM38)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 16:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Build ID: LMY47I
Display ID: l300_lyx_z3c_welcome_480x960_en_v01
Version: 8.1
Build Date: 2018ه¹´ 11وœˆ 01و—¥ وکںوœںه›› 17:50:21 CST
Model: Mate 20 Pro
Brand: HUAWEI
Device: Mate 20 Pro
Manufacturer: Android
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_WEG.L_P73
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 358623432164090
IMEI[2] from NVRAM: 358623432164108
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x66800000
Saved to : C:\Users\s\Documents\Android_MTK\firmware_backup\MT6580_EMMC_HUAWEI_Mate 20 Pro_8_1_ALPS_L1_MP6_V2_WEG_L_P73(2019_04_09_20_56)
Wait untill phone will start charging.
All done.
وشكرااا مسبقاااا
ارجو المساعدة في فلاشة هاتف mate 20 pro مقلد
بيانات الفلاشة
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM38)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 16:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM39)
Build ID: LMY47I
Display ID: l300_lyx_z3c_welcome_480x960_en_v01
Version: 8.1
Build Date: 2018ه¹´ 11وœˆ 01و—¥ وکںوœںه›› 17:50:21 CST
Model: Mate 20 Pro
Brand: HUAWEI
Device: Mate 20 Pro
Manufacturer: Android
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_WEG.L_P73
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 358623432164090
IMEI[2] from NVRAM: 358623432164108
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x66800000
Saved to : C:\Users\s\Documents\Android_MTK\firmware_backup\MT6580_EMMC_HUAWEI_Mate 20 Pro_8_1_ALPS_L1_MP6_V2_WEG_L_P73(2019_04_09_20_56)
Wait untill phone will start charging.
All done.
وشكرااا مسبقاااا
التعديل الأخير: