
الأسباب الرئيسية لعمل هذا الموضوع تبادل للخبرات من باب أولى لأن المنتدى أنشئ لهذا الغرض
كذلك طرح طرق الفلاش لموديلات قد توجد فيها خطوات قد تخفى على الأخرين ويمكن توضيحها في هذا الموضوع
يمنع الردود في الموضوع لأنه مخصص فقط للتجارب
أي رد يحذف مباشرة
Follow along with the video below to see how to install our site as a web app on your home screen.
ملاحظة: This feature may not be available in some browsers.
--------------------------------------------------------------------------------Platform: LG Qualcomm
Selected port: COM7
Selected model: E400
Reading info...OK
Mode: Normal
Model ID: E400
Firmware compiled date: Nov 17 2011
Firmware compiled time: 22:00:00
Firmware released date: Jul 12 2012
Firmware released time: 11:13:28
SW Version: E0_EU-M7225A-V10e-JUL-12-2012-XX
IMEI: 351895-05-660146-9
Bluetooth address: 10:F9:6F:68:16:11
Opening "LGE400AT-00-V10g-MEA-XXX-SEP-14-2012+0.oct"...OK
Switching to Download mode...OK
Checking partition...OK
Write BootLoaders: No
Writing AMSS...OK
Writing Boot Image...OK
Writing Recovery Image...OK
Writing Persist...OK
Writing System...OK
Finalizing...OK
Writing firmware done!
To finish the operation please power on phone and wait 3 minutes
Welcome to Octopus Box LG Software version 2.4.8
Connecting to server octopus-server0.no-ip.biz:82...OK
Authorizing...OK
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM58
Selected baudrate: 921600
Selected model: GT405
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect USB cable.
If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 359829-03-072839-7
Color: Red
Sending APP flash loader...OK
Opening "GT405AT-00-V10b-EUR-XX-APR-16-2010+0.oct"...OK
Writing "GT40x_CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw"...OK
Writing "GT405_CXC_FS_CABS_LP_NAND_commercial_EUR_OPEN.ssw"...OK
Writing "GT40x_cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND.ssw"...OK
APP GDFS blocks count: 21
ACC GDFS blocks count: 24
Writing APP GDFS...
Writing APP GDFS done!
Writing ACC GDFS...
Writing ACC GDFS done!
Disconnected.
Welcome to Octopus Box LG Software version 2.4.8
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM7
Selected baudrate: 921600
Selected model: A170
Please, disconnect battery and connect cable...
Phone found.
Sending preloader...OK
Sending loader...OK
Reading info. Please wait...
Flash ID: 20002888
Flash type: ST
IMEI: 356135-04-334843-6
Reading security area...OK
Backup saved to "A170-356135043348436_02-05-2013_11-15-36.eep"
Writing security area...OK
Phone successfully unlocked!
Welcome to Octopus Box LG Software version 2.4.9
Converting files...
Phone model: GW525
Files:
File №1: F:\Gsm\FIRMWARE LG\GW\GW525\BIN_GW525AT-00-V10i-ARB-XXX-JUN-04-2010+0.bin
File №2:
File №3:
File №4:
File №5:
File №6:
File №7:
File №8:
File №9:
File №10:
File №11:
Platform: LG Infineon
Result file: F:\Gsm\FIRMWARE LG\Octopus\File Firmware\GW\GW525\BIN_GW525AT-00-V10i-ARB-XXX-JUN-04-2010+0.oct
Converting "BIN_GW525AT-00-V10i-ARB-XXX-JUN-04-2010+0.bin"
Firmware convert done!
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: GW525
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI: 35XXXX-XX-XXXXXX-X
Opening "BIN_GW525AT-00-V10i-ARB-XXX-JUN-04-2010+0.oct"...OK
Writing Firmware...
Writing Firmware done!
Disconnected.
Welcome to Octopus Box LG Software version 2.4.9
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: GW525
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI: 35XXXX-XX-XXXXXX-X
Reading codes. Please wait...
Backup saved to
"GW525-35XXXXXXXXXXXXX_09-05-2013_10-33-48.eep"
--------------------------------------------------------------------------------
NCK : 1114 1151 5752 0581
NSCK : 7630 1740 3820 0285
SPCK : 7966 0148 8625 5409
CCK : 3483 0717 6781 5213
SIM : 2168 1337 3086 0879
MCC: 234 (United Kingdom)
MNC: 20 (Hutchison 3G UK Ltd)
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Go to menu>Settings>Security>SIMLOCK and enter the code.
Disconnected.
Welcome to Octoplus/Octopus Box LG Software version 1.1.3
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: COM7
Selected baudrate: 921600
Selected model: L342i
Please reconnect battery...
Phone found.
Sending loader...30-12-2011 18:42:21 > OK
Reading info...
Flash ID: 8988
Flash type: Intel
IMEI: 35XXX-0X-XXXXXX-X
Backuping Calibration data...30-12-2011 18:42:31 > OK
Unlocking...
Phone succesfully unlocked!
Welcome to Octoplus/Octopus Box LG Software version 1.1.3
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: T505
Disconnect battery and connect USB cable to phone...OK
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: ADBA
Flash Vendor: Hynix
Reading info...
IMEI: 35XXXX-XX-XXXXXX-X
Bluetooth address: 00:AA:70:32:03:F6
Firmware version: V10a
Locks: none
Opening "LGT505AT-00-V10a-MEA-XXX-SEP-05-2011+0.oct"...OK
Reading EEPROM...OK
Backup saved to "T505_35XXXXXXXXXXXXX_04-06-2013_22-25-54.EEP"
Writing Firmware...OK
Writing EEPROM...OK
Disconnected.
Welcome to Octoplus/Octopus Box LG Software version 1.2.3
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM7
Selected model: GX300
This action requires COM cable!
Phone and phone lights should be powered ON
Reseting...OK
Converting files...
Phone model: GX300
Files:
File №1: H:\DJAMELGSM\MOBILE PHONE FIRMWARE\FIRMWARE LG\GX
\GX300AT-00-V10b-ARB-XXX-JUL-20-2010+0\ROM_GX300AT-00-
V10b-ARB-XXX-JUL-20-2010+0_MAIN.bin
File №2: H:\DJAMELGSM\MOBILE PHONE FIRMWARE\FIRMWARE LG\GX
\GX300AT-00-V10b-ARB-XXX-JUL-20-2010+0\ROM_GX300AT-00-
V10b-ARB-XXX-JUL-20-2010+0_SUB.bin
File №3:
File №4:
File №5:
File №6:
File №7:
File №8:
File №9:
File №10:
File №11:
Platform: LG Infineon
Result file: H:\DJAMELGSM\MOBILE PHONE FIRMWARE\FIRMWARE LG
\OCTOPUS\FILE FIRMWARE\GX\ROM_GX300AT-00-V10b-ARB-XXX-JUL-
20-2010+0.oct
Converting "ROM_GX300AT-00-V10b-ARB-XXX-JUL-20-2010+0
_MAIN.bin"
Converting "ROM_GX300AT-00-V10b-ARB-XXX-JUL-20-2010+0
_SUB.bin"
Firmware convert done!
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: GX300
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: 89B1
Flash type: Intel
Reading info. Please wait...
IMEI A: 352801-04-206515-6
Opening "ROM_GX300AT-00-V10b-ARB-XXX-JUL-20-2010+0.oct"...OK
Erasing...Please wait...OK
Writing Firmware...OK
Reconnecting at second CPU...
Phone found.
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: 8903
Flash type: Intel
Reading info. Please wait...
IMEI B: 352802-04-807256-8
Erasing...Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.
Welcome to Octoplus/Octopus Box LG Software version 1.3.5
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM23
Selected baudrate: 921600
Selected model: KP108
Please reconnect battery...
Phone found.
Sending preloader...OK
Sending loader...OK
Reading info. Please wait...
Flash ID: 01001A01
Flash type: AMD/Spansion
IMEI: 356579-02-934760-9
Opening "KP108-00-V10a-ARB-XX-FEB-08-2010.oct"...OK
Erasing. Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.
--------------------------------------------------------------------------------
Platform: LG Infineon
Connection mode: OMAP
Selected model: P970
Opening "P970AT-00-V10c-ARB-XXX-MAY-23-2011+0.oct"...
Please, disconnect battery and connect P999 cable (with 910k
resistor).OK
Initializing device...OK
Writing Firmware...
Connecting to modem CPU...OK
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Writing psi.fls...OK
Writing slb.fls...OK
Writing AENEAS_FW.fls...OK
Writing R375_SIC.fls...OK
Connecting to application CPU...OK
Writing Partition #0...OK
Writing Partition #1...OK
Writing Partition #2...OK
Writing Partition #3...OK
Writing Partition #4...OK
Writing Partition #5...OK
Writing Partition #6...OK
Writing Partition #7...OK
Writing Partition #8...OK
Writing Partition #9...OK
Writing Partition #10...OK
Writing Partition #11...OK
Writing Partition #12...OK
Writing Partition #13...OK
Writing firmware done!
Rebooting phone...
Disconnected.
Please, reboot the phone manually.
platform: Lg qualcomm
selected port: Com133
selected model: E420
reading info...ok
mode: Normal
model id: Lge420
firmware compiled date: Feb 22 2013
firmware compiled time: 00:00:00
firmware released date: Jan 21 2014
firmware released time: 17:51:48
sw version: Lge420at-00-v10c-ame-xx-jan-21-2014+0
imei: 357675xxxxxxxx
bluetooth address: Bc:f5:ac:64:97:d2
wi-fi mac address: 8c:3a:e3:31:40:cb
opening "lge420at-00-v10c-ame-xx-jan-21-2014+0.oct"...ok
switching to download mode...ok
writing cust...ok
writing boot_logo_image...ok
writing recovery...ok
writing persist...ok
writing system...ok
writing modem...ok
writing apps...ok
writing appssbl...ok
writing ext...ok
writing oemsbl...ok
writing qcsbl...ok
finalizing...ok
writing firmware done!
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold volume-up button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 354695-03-567096-6
Color: Red
Sending APP flash loader...OK
Opening "GT505AT-00-V10b-METEOR-IE-JUN-19-2009.oct"...OK
Writing "GT505
_CXC_LGPXO_SYS_CABS_LP_NAND_MET_IE_commercial.ssw"...OK
Writing "GT505_CXC_FS_CABS_LP_NAND_MET_IE_commercial.ssw"...OK
Writing "GT505_cxc000000_APPLICATION_PHONE_SB_IAR-ARM-
NAND_MET_IE_commercial.ssw"...OK
APP GDFS blocks count: 18
ACC GDFS blocks count: 23
Writing APP GDFS...
Writing APP GDFS done!
Writing ACC GDFS...
Writing ACC GDFS done!
Disconnected.
Welcome to Octoplus/Octopus Box LG Software version 1.6.4
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM18
Selected model: [COLOR=#ff8c00]E960[/COLOR]
Searching Diagnostic Ports...OK
Reading info...OK
Mode: [COLOR=#ff0000]Emergency[/COLOR]
Model ID: BS/J1A/1 (LG-E960)
SW version: LGE960AT-00-V10d-NXS-XX-FEB-16-2013-JDQ39-USER+0
Product ID: PT0xxxxxxxxxxxxxxxxxx
IMEI: 35xxxx-xx-xxxxxx-x
Unlocking...
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "E960_35xxxxxxxxxxxxx_24-07-2014_14-53-51.SEC"
Analyzing security...OK
Writing security area...OK
[COLOR=#800080]Phone successfully unlocked![/COLOR]
Rebooting phone...
Welcome to Octoplus/Octopus Box LG Software version 1.6.4
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM317
Selected model: [COLOR=#ff8c00]MS323[/COLOR]
Reading info...OK
Mode: [COLOR=#ff0000]Normal[/COLOR]
Model ID: WX_xxxxx
Firmware compiled date: Feb 12 2014
Firmware compiled time: 05:00:00
Firmware released date: Apr 7 2014
Firmware released time: 12:01:47
SW Version: M8610B-AAAANAZM-1.0.xxxx
IMEI: 014xxx-xx-xxxxxx-x
Unlocking...
Reading NVM...OK
Backup saved to "MS323_014xxxxxxxxxxxx_24-07-2014_13-00-08.NVM"
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "MS323_014xxxxxxxxxxxx9_24-07-2014_13-02-12.SEC"
Writing security area...OK
Switching to Normal mode...
Found model WX_PROJE at port COM317
Checking data...OK
Writing NVM...OK
NVM succesfully repaired.
[COLOR=#800080]Phone successfully unlocked![/COLOR]
To complete the operation, please make Factory Reset (Go to "Settings" ->
"General" -> "Backup & reset" -> "Factory data reset", press "Reset
phone" and "Erase everything" buttons).
Welcome to Octoplus/Octopus Box LG Software version 1.6.6
--------------------------------------------------------------------------------
Converting files...
Unpacking "amss.bin"...OK
Unpacking "partition.bin"...OK
Unpacking "qcsblhd_cfgdata.mbn"...OK
Unpacking "qcsbl.mbn"...OK
Unpacking "system.img.ext4_0"...OK
Unpacking "system.img.ext4_1"...OK
Unpacking "system.img.ext4_2"...OK
Unpacking "system.img.ext4_3"...OK
Unpacking "system.img.ext4_4"...OK
Unpacking "system.img.ext4_5"...OK
Unpacking "system.img.ext4_6"...OK
Unpacking "system.img.ext4_7"...OK
Unpacking "recovery.img"...OK
Unpacking "emmc_appsboot.bin"...OK
Unpacking "persist.img.ext4"...OK
Unpacking "oemsbl.bin"...OK
Unpacking "boot.img"...OK
Unpacking "boot_logo.bin"...OK
Unpacking done. Processing files...
Identifying sub-files...OK
Creating destination file...OK
Deleting temporary files...
Deleting directory "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\"...
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\amss.bin"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\boot.img"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\boot_logo.bin"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\emmc_appsboot.bin"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\oemsbl.bin"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\partition.bin"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\persist.img.ext4"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\qcsbl.mbn"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\qcsblhd_cfgdata.mbn"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\recovery.img"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_0"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_1"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_2"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_3"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_4"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_5"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_6"...OK
Deleting file "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\system.img.ext4_7"...OK
Directory "C:\Users\DVLP\AppData\Local\Temp\LGP705AT-00-V20b-AME-XX-MAY-03-2013+0\" succesfully deleted!
Firmware convert done!
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM164
Selected model: P705g
Reading info...OK
Mode: Normal
Model ID: P705g
Firmware compiled date: Mar 05 2012
Firmware compiled time: 07:00:00
Firmware released date: Aug 9 2012
Firmware released time: 07:21:56
SW Version: P705g-M7227A-V10a-AUG-03-2012-XX
IMEI: 352250-05-230196-2
Bluetooth address: 70:05:14:D1:21:13
Wi-Fi MAC address: 10:F9:6F:D5:6A:48
Opening "LGP705AT-00-V20b-AME-XX-MAY-03-2013+0.oct"...OK
Switching to Download mode...OK
Checking partition...OK
Write BootLoaders: Yes
Checking BCPL status...OK
BCPL status: 1
Unlocking BCPL...OK
BCPE status: 1
Checking BCPL status...OK
BCPL status: 0
Writing QCSBL_CFG...OK
Writing QCSBL...OK
Writing OEMSBL...OK
Writing AMSS...OK
Writing EMMCBOOT...OK
Writing Boot Image...OK
Writing Boot logo...OK
Writing Recovery Image...OK
Writing Persist...OK
Writing System...OK
Finalizing...OK
Writing firmware done!
To finish the operation please power on phone and wait 3 minutes
Welcome to Octoplus/Octopus Box LG Software version 1.6.6
--------------------------------------------------------------------------------
Platform LG Qualcomm
Selected port COM164
Selected model P705
Reading info...OK
Mode Normal
Model ID P705
Firmware compiled date Feb 22 2013
Firmware compiled time 000000
Firmware released date May 3 2013
Firmware released time 182312
SW Version P705-M7227A-V20b-MAY-03-2013-XX
IMEI 35XXXX-XX-XXXXXX-X
Bluetooth address 700514D12113
Wi-Fi MAC address 10F96FD56A48
Switching to Download mode...OK
Unlocking...
Searching security area...OK
Reading security area...OK
Backup saved to P705_35XXXXXXXXXXXXX_16-08-2014_19-26-16.SEC
Analyzing security...OK
IMEI 35XXXX-XX-XXXXXX-X
Bluetooth address 700514D12113
Writing security area...OK
Switching to Normal mode...
Found model P705 at port COM164
Finalizing...OK
Rebooting phone...OK
Phone successfully unlocked!
Rebooting phone...