الحمد لله تتوالى الحصريات على العملاق OCTOPLUS
تم ايجاد نقاط ISP DIRECT اللعين و العنيد WIKO LENNY
و تم احياء و تصليح الهاتف بدون نزع الذاكرة
كود:
[B][SIZE=2]Welcome to Octoplus Pro JTAG Software version 1.5.8. [/SIZE] Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: Generic Usb Smart Card Reader 0
Reader #4: Generic Usb Smart Card Reader 1
[COLOR=#ff3300]Please disconnect battery and USB cable.[/COLOR]
[COLOR=#ff3300]
[/COLOR]
[COLOR=#007acc]Model Settings:[/COLOR]
Interface : [COLOR=#008c00]eMMC[/COLOR]
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
[COLOR=#007acc]Connecting...[/COLOR]
Device : [COLOR=#008c00]Hynix eMMC H4G1d[/COLOR]
Page size : [COLOR=#008c00]512 B[/COLOR]
Block size : [COLOR=#008c00]512 B[/COLOR]
Block count : [COLOR=#008c00]7634944[/COLOR]
Size : [COLOR=#008c00]3728.00 MB[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]CID Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
CID : 90014A4834473164040501A20CA8A185
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex) 1A20CA8
Manufacturing date : 10/2014
---------------------------------------------------------------
[COLOR=#007acc]CSD Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR=#007acc]EXTCSD Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : [COLOR=#008c00]512 Kbytes[/COLOR]
Boot1 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
Boot2 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
RPMB size : [COLOR=#008c00]4096 Kbytes[/COLOR]
[COLOR=#008c00]
[/COLOR]
Partition config : [COLOR=#008c00](0x48) 01001000[/COLOR]
Boot partition enable : [COLOR=#008c00]Boot partition 1[/COLOR]
[COLOR=#007acc](Bus width = 1Bit)[/COLOR]
Boot ACK : [COLOR=#008c00]Boot acknowledge sent during boot operation Bit[/COLOR]
[COLOR=#008c00]
[/COLOR]
Boot bus conditions : [COLOR=#008c00](0x00) 00000000[/COLOR]
Boot bus width : [COLOR=#008c00]x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/COLOR]
Reset boot bus conditions : [COLOR=#008c00]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/COLOR]
Boot mode : [COLOR=#008c00]Use single data rate + backward compatible timings in boot operation (default)[/COLOR]
[COLOR=#008c00]
[/COLOR]
RST_n function : [COLOR=#008c00](0x01) RST_n signal is permanently enabled[/COLOR]
[COLOR=#008c00]
[/COLOR]
Partitioning support : [COLOR=#008c00]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR=#008c00]Device can have enhanced technological features in partitions and user data area.[/COLOR]
Max enhanced data size: [COLOR=#008c00]1908736 Kbytes[/COLOR]
Partitions attribute : [COLOR=#008c00]0x0[/COLOR]
Part setting completed: [COLOR=#008c00]0x0[/COLOR]
GP partition 1 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 2 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 3 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 4 size : [COLOR=#008c00]0 b[/COLOR]
Enhanced area size : [COLOR=#008c00](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR=#008c00](0x0) 0 b[/COLOR]
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H4G1d_09_05_2018_11_44_23.bin.
[COLOR=#008c00]Connect successful[/COLOR]
---------------------------------------------------------------
Selected scatter file: E:/FLASH TELEPHONE/Wiko/LENNY_V20/LENNY_V20/LENNY_V20/rom/MT6572_Android_scatter.txt.
Scatter file type 2.
Opened input file: E:/FLASH TELEPHONE/Wiko/LENNY_V20/LENNY_V20/LENNY_V20/rom/preloader_s5201ap.bin
Found 2 eMMC supported CID:
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H4G1d
eMMC CID : 90014A483447316404
eMMC Vendor ID : 90 (Hynix eMMC)
eMMC Model ID : 4A01
eMMC Name : H4G2a
eMMC CID : 90014A483447326111
Writing. Please wait...
[COLOR=#008c00]Write data verification is enabled.[/COLOR]
Writing partition PRELOADER... [COLOR=#008c00]Write data verification is enabled.[/COLOR]
[COLOR=#008c00]Done.[/COLOR]
Writing partition MBR... [COLOR=#008c00]Done.[/COLOR]
Writing partition EBR1... [COLOR=#008c00]Done.[/COLOR]
Writing partition UBOOT... [COLOR=#008c00]Done.[/COLOR]
Writing partition BOOTIMG... [COLOR=#008c00]Done.[/COLOR]
Writing partition RECOVERY... [COLOR=#008c00]Done.[/COLOR]
Writing partition SEC_RO... [COLOR=#008c00]Done.[/COLOR]
Writing partition LOGO... [COLOR=#008c00]Done.[/COLOR]
Writing partition ANDROID... [COLOR=#008c00]Done.[/COLOR]
Writing partition CACHE... [COLOR=#008c00]Done.[/COLOR]
Writing partition USRDATA... [COLOR=#008c00]Done.[/COLOR]
Writing checksums...[COLOR=#008c00]Done.[/COLOR]
Writing finished.
[COLOR=#007acc]SW: 1.5.8; FW: 1.23.[/COLOR]
[COLOR=#ff3300]Disconnected.[/COLOR]
[COLOR=#ff3300]
[/COLOR]
[COLOR=#ff3300]Please disconnect battery and USB cable.[/COLOR]
[COLOR=#ff3300]
[/COLOR]
[COLOR=#007acc]Model Settings:[/COLOR]
Interface : [COLOR=#008c00]eMMC[/COLOR]
Voltage : 3.3V
Bus Mode : 1 bit
Bus speed : Auto
[COLOR=#007acc]Connecting...[/COLOR]
Device : [COLOR=#008c00]Hynix eMMC H4G1d[/COLOR]
Page size : [COLOR=#008c00]512 B[/COLOR]
Block size : [COLOR=#008c00]512 B[/COLOR]
Block count : [COLOR=#008c00]7634944[/COLOR]
Size : [COLOR=#008c00]3728.00 MB[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]CID Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
CID : 90014A4834473164040501A20CA8A185
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H4G1d
Product revision : 0.5
Product serial number : (hex) 1A20CA8
Manufacturing date : 10/2014
---------------------------------------------------------------
[COLOR=#007acc]CSD Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR=#007acc]EXTCSD Info[/COLOR]
[COLOR=#007acc]
[/COLOR]
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : [COLOR=#008c00]512 Kbytes[/COLOR]
Boot1 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
Boot2 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
RPMB size : [COLOR=#008c00]4096 Kbytes[/COLOR]
[COLOR=#008c00]
[/COLOR]
Partition config : [COLOR=#008c00](0x48) 01001000[/COLOR]
Boot partition enable : [COLOR=#008c00]Boot partition 1[/COLOR]
[COLOR=#007acc](Bus width = 1Bit)[/COLOR]
Boot ACK : [COLOR=#008c00]Boot acknowledge sent during boot operation Bit[/COLOR]
[COLOR=#008c00]
[/COLOR]
Boot bus conditions : [COLOR=#008c00](0x00) 00000000[/COLOR]
Boot bus width : [COLOR=#008c00]x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/COLOR]
Reset boot bus conditions : [COLOR=#008c00]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/COLOR]
Boot mode : [COLOR=#008c00]Use single data rate + backward compatible timings in boot operation (default)[/COLOR]
[COLOR=#008c00]
[/COLOR]
RST_n function : [COLOR=#008c00](0x01) RST_n signal is permanently enabled[/COLOR]
[COLOR=#008c00]
[/COLOR]
Partitioning support : [COLOR=#008c00]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR=#008c00]Device can have enhanced technological features in partitions and user data area.[/COLOR]
Max enhanced data size: [COLOR=#008c00]1908736 Kbytes[/COLOR]
Partitions attribute : [COLOR=#008c00]0x0[/COLOR]
Part setting completed: [COLOR=#008c00]0x0[/COLOR]
GP partition 1 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 2 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 3 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 4 size : [COLOR=#008c00]0 b[/COLOR]
Enhanced area size : [COLOR=#008c00](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR=#008c00](0x0) 0 b[/COLOR]
[COLOR=#008c00]
[/COLOR]
---------------------------------------------------------------Searching Android build info...
[COLOR=#ff3300]Not found[/COLOR]
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H4G1d_09_05_2018_12_05_20.bin.
[COLOR=#008c00]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]SW: 1.5.8; FW: 1.23.[/COLOR]
P00: EXT2FS (001ABA00, 00071000) 226 MB
P01: EXT2FS (00004800, 00005000) 10 MB
P02: EXT2FS (00009800, 00005000) 10 MB
P03: EXT2FS (0001BA00, 00190000) 800 MB
[/B]ملاحظة : لمن اراد تغيير سعة الذاكرة ل LENNY من 4GB الى 8GB ما عليه الا بتغييرها بذاكرة CONDOR C8
وهذا عن تجريب شخصي
:icon30:
