كوندور h1

  • بادئ الموضوع بادئ الموضوع hfaidia
  • تاريخ البدء تاريخ البدء
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 625 [MSM8953]
ID_BLOCK_S : E5D4F713
ID_BLOCK_I : 000460E1
ID_BLOCK_L : 90500AF463CFF4F7D0854F509FEA6A62
ID_BLOCK_L : 8FC648E3D47FEF64995439F6FC332D2E
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:38

Reconnect Power/Cable!
 
اخي الكريم ماهي الفائدة من طرح موضوعك .
لانك لم تشرح للاخوة طريقة التبويت . رغم انك ذكرت انه تم عملية التبويت بعد عناء
 
Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 34859CF5
ID_BLOCK_L : F272689641ADDAD5B2E76976B1880840
ID_BLOCK_L : 5C37993025AC1E972A85CE070DE0FEDD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!


Brand : Condor
ProdName : SP620
ProdModel : Plume H1
Device : msm8953_64
AndroidVer: 7.1.2
Manufact. : SPA Condor Electronics
SysPatch : N2G47H
DevComTime: 16/04/2018 09:07:45
QLMxCPU : MSM8953

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 34859CF5
ID_BLOCK_L : F272689641ADDAD5B2E76976B1880840
ID_BLOCK_L : 5C37993025AC1E972A85CE070DE0FEDD
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!


المشكل كان في التعريف و الحل هو تثبيت تحديث CareSuiteConnectivity
 
عودة
أعلى