حصري Condor Griffe T2 (SP530) Firmware Infinity SPRD PAC + Nvram

شكراااا لك اخـــــــــــــــــي
 
شكرا اخي علي مجهودك جعله الله في ميزان حسناتك
 
رد: Condor Griffe T2 (SP530) Firmware Infinity PAC.SC + SPRD PAC + Nvram

شكرا أخــــــــي
 
رد: Condor Griffe T2 (SP530) Firmware Infinity SPRD PAC + Nvram

شكرا توقف الهاتف عند السيستام ومات الهاتف كل ما اعيد التفليش يتوقف عند السيستام هو الان ميت هل من مساعدة ارجو الرد من فضلكم
 
رد: Condor Griffe T2 (SP530) Firmware Infinity SPRD PAC + Nvram

info.gsm قال:



Condor Griffe T2 (SP530) SPRD PAC + Nvram









Check/Read Info

كود: 
[LEFT]Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC983x] eMMC [Generic Android 7.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : SP530
Model Brand : Condor
Model Device: SP530
AndrVersion : 7.0
BaseBand CPU: ZSL866_AN
CompileDate : 22-07-2017 11:28:17
Project Ver : NRD90M release-keys
Model Ext   : Griffe T2

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:35

Reconnect Power/Cable!
[/LEFT]

​


Read FullFlash

كود: 
[LEFT]
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : SP530
Model Brand : Condor
Model Device: SP530
AndrVersion : 7.0
BaseBand CPU: ZSL866_AN
Project Ver : NRD90M release-keys
Model Ext   : Griffe T2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2709 MiB
Saved to : C:\Users\INFO.GSM\Desktop\ZSL866_AN_SP530_7.0_NRD90M_release-keys_Griffe_T2\
Done!

Elapsed: 00:11:31

Reconnect Power/Cable![/LEFT]


Read NV

كود: 
[LEFT]
Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok , 0x1AFA4
Saved to : C:\Users\INFO.GSM\Desktop\CX77xx_SPDNV.spdnv

Elapsed: 00:00:38

Reconnect Power/Cable!
[/LEFT]


Convert InfinitySC to SPRD PAC

كود: 
[LEFT]

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : ZSL866_AN_SP530_7.0_NRD90M_release-keys_Griffe_T2
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC5300

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_l.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc983x_cp1.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : l__WPH_arm7.bin
[ADD FILE] : PM_arm7_sys.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : fblogo_720x1280.bin
[ADD FILE] : wcn_fdl.bin
[ADD FILE] : AA_MARLIN.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x001A
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:02:11

Saved to : ZSL866_AN_SP530_7.0_NRD90M_release-keys_Griffe_T2.pac
Done!
[/LEFT]


SPRD PAC

SP530_V15.0_20170706

https://mega.nz/#!aogwwTiI!6hOm0ndoKzwRkf_vihvbBzyQilfaLvqJn0WjXENeZX4

Nvram

https://mega.nz/#!upQV2aZD!qQAHzRqtz2wMqT9VftK00HERO6vJRC-1RX4MQr0_hZU


1418063548952.gif
أنقر للتوسيع...

شكرا توقف الهاتف عند السيستام ومات الهاتف كل ما اعيد التفليش يتوقف عند السيستام هو الان ميت هل من مساعدة ارجو الرد من فضلكم
 
رد: Condor Griffe T2 (SP530) Firmware Infinity SPRD PAC + Nvram

شكرا توقف الهاتف عند السيستام ومات الهاتف كل ما اعيد التفليش يتوقف عند السيستام هو الان ميت هل من مساعدة ارجو الرد من فضلكم
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
عودة
أعلى