طلب مساعدة طلب فلاشة htc desire

  • بادئ الموضوع بادئ الموضوع sliman
  • تاريخ البدء تاريخ البدء
S

sliman

عضو أساسي
إنضم
9 مارس 2016
المشاركات
514
مستوى التفاعل
503
النقاط
93
السلام عليكم ممكن فلاش لهذا الهاتف وهذا انفو الهاتف على cm2

كود: 
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048604A49D041207
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048604A49D041207
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xBF487B52F37A3D5FEAAEEF05B757A4FB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : htc
ProdName  : htc_europe
ProdModel : HTC Desire 616 dual sim by WyverN
Device    : htc_v3_dug
AndroidVer: 4.2.2
MTKxCPU   : MT6592
MTKxPRJ   : SW_G98518A3_V019_M10_HTC_V3DUG_EURO_MP

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!
 
اذا امكن على ميراكل
 
لا املك الميراكل علي الفالكون بوكس ان اردت
 
ميراكل انفوا تاعوا يساعد جيدا في معرفة الفلاةشة المطابقة
 
السلام عليكم
أخي حتى أنا أبحث عن فلاشة htc desire c ولقد طرحت مشكلتي في المنتدى بعد عناء البحث لكن بلا تجاوب أضنها لا توجد فلاشة لهذا الهاتف او نادرة
 
بارك الله فيك جاري التحميل والتجريب
 
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=9195
كود: 
pass : www.gem-flash.com
https://docs.google.com/uc?id=0By4_z1Byo7UKd0pjOFVjT1gzNXM&export=download
كود: 
pass : www.gem-flash.com


D616W لا العربية ولا الفرنسية
https://www.4shared.com/get/5vNMZIxwce/ROM_stock_HTC_D616W_byAbdollah.html


مهم جدا
2hyv51z.png
 
خطأ في الفلاش
كود: 
Scatter Load Ok , BaseBand : MT6592 , Project : wt98518 , Storage : EMMC
Files found : 13 , Set to Flash : 12
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 45 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048604A49D041207
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048604A49D041207
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xBF487B52F37A3D5FEAAEEF05B757A4FB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6592 , Project : wt98518 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3557 mV
BL : [WARNING] : BatteryLevel LOW!!!

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000000000-0x0000000000100000
Erase : 0x0000000001D00000-0x00000000E3E00000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_wt98518.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0015
Update PMT by user request
Repartition Failed! Something wrong with HW or BL? Try make "Flash Erase" first!

Operation Failed
Elapsed: 00:00:17
Reconnect Power/Cable!
 
وهذا الخطأ في برنامج sp flash tool

689121936.png
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
عودة
أعلى