OPPO F1s مشكل BaseBand بعد التفليش
- بادئ الموضوع mouh123
- تاريخ البدء
بعد ما قمت بالفلاشة الرسمية و الموضوعة في المنتدى لم ينجح الامر حتى قمت بصنع فلاش و نجح الامر و الحمد لله
MR.GSM
:: مرشح للإشراف ::, ,
MR.GSM
:: مرشح للإشراف ::, ,
Operation : Fix Unknown BaseBand [ v1.58 ]
User accepted FixBB operation!
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:09
Reconnect Power/Cable!
User accepted FixBB operation!
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 18 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : BROM
[DA_ERROR] : DRAM Configure failed!
ErroCode : 0x2122
EMICFG_NOT_ACCEPTED_CONFIG
Boot Error!
Operation Failed
Elapsed: 00:00:09
Reconnect Power/Cable!
Imed Bouzid
عضو
- إنضم
- 29 أكتوبر 2016
- المشاركات
- 24
- مستوى التفاعل
- 7
- النقاط
- 3
السلام عليكم اخي الله يسترك كفاش حليت مشكل unknown basbande عندي نفس الهاتف هبلني الله يحفظك
volcano box inferno
ممكن تحل المشكل اخي
ممكن تحل المشكل اخي
ممكن تعطين طريقة ليستفيد الجميع
قمت بالتفليش ب الكرد ميموري ؟
- إنضم
- 14 أوت 2012
- المشاركات
- 1,653
- مستوى التفاعل
- 4,165
- النقاط
- 113
ضع رابط الفلاشة المستعملة مع الطريقة ليُستفاد منها
didi8989
عضو موقوف
- إنضم
- 9 جانفي 2017
- المشاركات
- 134
- مستوى التفاعل
- 127
- النقاط
- 0
http://downloads.oppo.com.s3.amazon...A1601EX_11_OTA_027_all_201701110933_local.zip
Preparations:
Download the firmware and copy it to the root directory of you phone storage.
Make sure you got enough battery left ≥ 30% would be better.
Here we begins:
Turn off the phone.
Hold down Power key + Volume down key at the same time, when OPPO logo appears release your fingers, after a few seconds you'll enter recovery mode.
Select the Language. (OPPO recovery support touchscreen operation, if your recovery is the early version which doesn't support touchscreen operation you can use Volume up/down keys to navigate and use Power key to confirm).
To make a clean install please select "Wipe data and cache", press "Yes" when it's done.
Select "Install from sd"
Tap the firmware you've downloaded and press "Yes", the updating will finish in a few minutes.
When the update is finished tap "Reboot" to finish updating.
Preparations:
Download the firmware and copy it to the root directory of you phone storage.
Make sure you got enough battery left ≥ 30% would be better.
Here we begins:
Turn off the phone.
Hold down Power key + Volume down key at the same time, when OPPO logo appears release your fingers, after a few seconds you'll enter recovery mode.
Select the Language. (OPPO recovery support touchscreen operation, if your recovery is the early version which doesn't support touchscreen operation you can use Volume up/down keys to navigate and use Power key to confirm).
To make a clean install please select "Wipe data and cache", press "Yes" when it's done.
Select "Install from sd"
Tap the firmware you've downloaded and press "Yes", the updating will finish in a few minutes.
When the update is finished tap "Reboot" to finish updating.