سحب فلاشة للتاب HAIER RK3066 E801
[video=youtube;DLh915S7Qcc]https://www.youtube.com/watch?v=DLh915S7Qcc&feature=youtu.be[/video]
[video=youtube;DLh915S7Qcc]https://www.youtube.com/watch?v=DLh915S7Qcc&feature=youtu.be[/video]
==== Wait for phone...
Phone found! [ 25 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 00C0
[0] Flash DIE : 00C8 0060 0017 0000
[0] Flash VEN : GigaDevice , GD25LQ64
[0] Flash CAP : 00800000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!
Elapsed: 00:00:37
Reconnect Power/Cable!
Operation : Flash [ v1.24 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : PMT Update skipped by user!
Flashing now
Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!
Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!
Write FSImage : prodnv.img
Write Data ...
Write Data Ok!
Write CodeData : sc7731g_CP0_modem.bin
Write Data ...
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : sc7731g_modem_CP2_WCN_14E_W15.42.5_Release.bin
Write Data ...
Write Data Ok!
Erase Block : RuntimeData
Erase block ...
Block erase Ok!
Write CodeData : logo_480x800.bin
Write Data ...
Write Data Ok!
Write CodeData : fblogo_480x800.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system.img
Write Data ...
Write Data Ok!
Write FSImage : cache.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Process : Flush
Flush Ok!
Write FSImage : userdata.img
Write Data ...
FSImage : Make and Flush SPImage
Write Data Ok!
Erase Block : INTERNALSD
Erase block ...
Block erase Ok!
Elapsed: 00:10:29
Reconnect Power/Cable!
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK312X
Read Info Ok!
Operation : ReadInfo [ v1.0 ]
======= Flash Info :
Channel : 0x00
FlashType : ADDE94A742
FlashSize : 0x0000000212000000
FlashCaps : 4194304/16384/32/40/2
======= Device Info :
CPU : RK312X
Android : v4.4.4
Project : eng.yuanye.20150130.174336
Name : TGW-706
Brand : condor
Device : TGW-706
Model : TGW-706
Read Info Ok!
Elapsed: 00:00:00
Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]
Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot
Elapsed: 00:00:00
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK3066
Read Info Ok!
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK3066
Read Info Ok!
Format FS/Reset Settings accepted by User!
Operation : FormatFS / ResetSettings [ v1.0 ]
Init UserData
Init Cache
Init IntSD
Init Ok! Format prepare Done!
Wait, until device reboot
Elapsed: 00:00:00
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 185 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : BBA0687FBA5A2251B747E928286F2C98
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkP.fg
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
Executing FFS FORMAT now...
FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Done!
Elapsed: 00:01:04
Reconnect Power/Cable!
Start at : [15/12/2016 / 11:42:12]
Operation : SP Unlock [ v1.24 ]
Mode : DirectUnlock
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 47 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Detected eMMC Flash , Structure detect Ok!
Checking Structure ...
SimLock state : Locked!
Unlocking ...
Unlock Done!
Elapsed: 00:00:18
Reconnect Power/Cable!
Finish at : [15/12/2016 / 11:42:31]