MXKEY [FT SCR2000 0], SN: C0833A82
Using device: USB ROM
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.84
Module ver: 1.0.0.21762(03-12-2014), Library ver: 1.0.0.14473(03-12-2014)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.37
EBL version: Quantum_Bootloader_10.37_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 01322400988787
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_01322400988787_back.RPL"
Processing file: rm607__06.07.mcusw
Downloading item CODE:rm607__06.07.mcusw_ebl_psi.fls, num block: 5, size: 25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.585 s
Erasing area 0x40040000-0x4007FFFE ...OK
Programming completed in 0.535 s
Erasing area 0x40080000-0x4009FFFE ...OK
Programming completed in 0.448 s
Erasing area 0x400A0000-0x4019FFFE ...OK
Programming completed in 1.611 s
Erasing area 0x40400000-0x41B7FFFE ...OK
Programming completed in 32.295 s
Checksum verified (0xE110)
Processing file: 466D4FB6_rm607__06.07.ppm_l
Downloading item CUSTackage_l.ppm_ebl_psi.fls, num block: 1, size: 3.22 MB
Erasing area 0x41C00000-0x41F37042 ...OK
Programming completed in 4.533 s
Checksum verified (0xEDDA)
Processing file: 2E12318A_rm608__06.07_005.image_l_claro_do_v1_9h4h9
Downloading item CUSTackage_l_claro_do.image.fls, num block: 1, size: 11.13 MB
Erasing area 0x42200000-0x43E5FFFE ...OK
Programming completed in 15.864 s
Checksum verified (0x39DC)
Total time for flashing process(boot+erase+write) was 7 min 0.968 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C1-01 USB Phonet (), PORT_ID: 1669B092
Verifying communication to device OK.
Phone type: RM-608 (C1-01)
SW version: V 06.07 13-10-11 RM-608 (c) Nokia
Imei plain: 01322400988787-9
Product code: 059F8K1
Language Pack:
- not available.
SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !
Camera config: NI00CS0000040C213402, ver: 002.005
هذا الموقع يستخدم ملفات تعريف الارتباط (الكوكيز ) للمساعدة في تخصيص المحتوى وتخصيص تجربتك والحفاظ على تسجيل دخولك إذا قمت بالتسجيل.
من خلال الاستمرار في استخدام هذا الموقع، فإنك توافق على استخدامنا لملفات تعريف الارتباط.