krim_said17
عضو
- إنضم
- 8 ماي 2013
- المشاركات
- 21
- مستوى التفاعل
- 1
- النقاط
- 3
ارجو من الاخوة المساعدة .عند الضغط على زر analyse jtag chain
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung i9108 XLoader- V1.00]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x0006 bits
وعندما اضغط على زر connect & get id
Connecting to the dead ****...ERROR
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz
None is detected.
اين يكمن المشكل
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung i9108 XLoader- V1.00]
Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 8 MHz
Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0xFFFFFFFE, IR Length = 0x06 bits
Total IR length: 0x0006 bits
وعندما اضغط على زر connect & get id
Connecting to the dead ****...ERROR
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz
None is detected.
اين يكمن المشكل
