رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة على NckBox
WIKO JERRY2 Reset To Factory
Boot Info
Reset To Factory
WIKO JERRY2 Reset To Factory
Boot Info
كود:
[B] Action : [COLOR="#FF0000"]Boot Info[/COLOR].
Selected WIKO:[COLOR="#FF0000"]Jerry 2[/COLOR]
Exe version: NCKBox AndroidMTK 2.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :[COLOR="#FF0000"]MT6580[/COLOR]
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
[system]Reading info, wait...
Build ID: [COLOR="#FF0000"]NRD90M[/COLOR]
Display ID: [COLOR="#FF0000"]alps-mp-n0.mp2-V1_tinno6580.we.n_P136[/COLOR]
Version: [COLOR="#FF0000"]7.0[/COLOR]
Build Date: Fri Aug 11 16:12:05 CST 2017
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_tinno6580.we.n_P136
Model: [COLOR="#FF0000"]JERRY2[/COLOR]
Brand: [COLOR="#FF0000"]WIKO[/COLOR]
Device: [COLOR="#FF0000"]v2610[/COLOR]
Manufacturer: [COLOR="#FF0000"]WIKO[/COLOR]
[COLOR="#FF0000"] This phone have FRP partition.[/COLOR]
IMEI[1]: 35XXXXXXXXXX23
IMEI[2]: 35XXXXXXXXXX22
Wait untill phone will start charging.
[0]All [COLOR="#FF0000"]done[/COLOR].[/B]
Reset To Factory
كود:
[B] [MISC]Action: [COLOR="#FF0000"]Reset To Factory[/COLOR].
Selected WIKO:[COLOR="#FF0000"]Jerry 2[/COLOR]
Exe version: NCKBox AndroidMTK 2.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :[COLOR="#FF0000"]MT6580[/COLOR]
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM29)
[COLOR="#FF0000"] Resetting userdata.[/COLOR]
Wait untill phone will start charging.
[0]All [COLOR="#FF0000"]done[/COLOR].[/B]
التعديل الأخير: