Start FRP Safe. Keep Userdata v2.95
Selected config: Tecno/BF7
Protocol: Boot [DA] Factory v7
Port: BROM + PL; Force BROM: Off; USB High-Speed: On
DA Key: custom; LSLA: Off; Auto-EMI: Off due to EMI file used
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21) 0E8D:2000
Waiting for boot Ack...
Boot Init...
PORT Disconnected 0x03E3
PORT Disconnected 0x03E3 Fail. Try again
Verify [DA] data... Ok 1 sec
Stop [Job 22349044] FRP Safe. Keep Userdata v2.95 27 sec
Start FRP META: try to keep Userdata v2.95
Protocol: META [SVC]
Power device Off and connect cable now
To enter META [SVC] mode device must be able to Power On well!
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21) 0E8D:2000
Waiting for boot Ack...
Waiting for boot logo...
ping Ok(1) 47 us
port reset(1)... Ok 1 sec
port reset(3)... Ok 7 sec
META [SVC] Ok
Switch protocol [AP]... Ok 17 sec
Boot done 49 sec
AP SoC: MT6761
AP SW ver: alps-mp-s0.mp1.rc-V14.105_reallytek.s0mp1rc.k61v1.64.bsp_P67
AP SW time: Mon Dec 9 21 30 33 CST 2024
FRP... Ok
Device should reboot in 30 sec. If it is not - power it On by Power key
1. Power device On
2. Be sure it works well
3. To finalize process make [Restore factory safety config]
Stop [Job 22349044] FRP META: try to keep Userdata v2.95 51 sec
Selected config: Tecno/BF7
Protocol: Boot [DA] Factory v7
Port: BROM + PL; Force BROM: Off; USB High-Speed: On
DA Key: custom; LSLA: Off; Auto-EMI: Off due to EMI file used
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21) 0E8D:2000
Waiting for boot Ack...
Boot Init...
PORT Disconnected 0x03E3
PORT Disconnected 0x03E3 Fail. Try again
Verify [DA] data... Ok 1 sec
Stop [Job 22349044] FRP Safe. Keep Userdata v2.95 27 sec
Start FRP META: try to keep Userdata v2.95
Protocol: META [SVC]
Power device Off and connect cable now
To enter META [SVC] mode device must be able to Power On well!
Waiting for device...
[ PRELOADER #21 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM21) 0E8D:2000
Waiting for boot Ack...
Waiting for boot logo...
ping Ok(1) 47 us
port reset(1)... Ok 1 sec
port reset(3)... Ok 7 sec
META [SVC] Ok
Switch protocol [AP]... Ok 17 sec
Boot done 49 sec
AP SoC: MT6761
AP SW ver: alps-mp-s0.mp1.rc-V14.105_reallytek.s0mp1rc.k61v1.64.bsp_P67
AP SW time: Mon Dec 9 21 30 33 CST 2024
FRP... Ok
Device should reboot in 30 sec. If it is not - power it On by Power key
1. Power device On
2. Be sure it works well
3. To finalize process make [Restore factory safety config]
Stop [Job 22349044] FRP META: try to keep Userdata v2.95 51 sec