Start: Identify [ v2.83 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init... Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
Sec Level: 0x00000005; Mode: SBC+SDA
BROM ver: 0xFF; BL ver: 0x03; [PRELOADER PORT]
SoC supported by Boot [FF] FireFly: Yes
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
Agent:
[7c77dd2d] E:\New folder\cm2\boot\Vivo\2022-12\MTK_AllInOne_DA_2.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 4 bbk
Sending DA1... Ok [1|1|-1|0]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: PRELOADER EXT_RAM initialized
Boot DA2... Ok [1|1|0|0]
DA Sync... Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC CID: 150100445836384D420912CACA031843 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445836384D42 [DX68MB] PRV: 0x09
Serial: 315279875 0x12CACA03
MM/YY: 1/2021
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: BA122F13D74B3BBBE4A48728F6BA6A62
MEID: 19706CBE7F70B58EE239DD416C151A8E
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
USB: HIGH-SPEED
Boot done 13 sec Adjusted: Yes, Allow errors: Yes
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
RPMB size 0x400000
RPMB counter 0x000001EA
RPMB is UNI-Type. Memory IC can be swaped between UNI-Type devices
Load partition table... Ok 16 us
GPT Ok
Partition table: PGPT [0x64] 47 entries
Read [preloader]... Ok
Preloader (0) MT6765 preloader_k65v1_64_bsp.bin with 9 memory types [e7529b95] slots: no
Read [preloader_backup]... Ok
Preloader (1) MT6765 preloader_k65v1_64_bsp.bin with 9 memory types [e7529b95] slots: no
Probe LK...
lk [1fa4d706] k65v1_64_bsp-23c3fa0-20221130200527-20241021183020
get modem info... BBK_R0MP1_K65V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V136_6_P187
Secondary RPMB... Off
Probe FRP... Most probably: Off
Probe bootloader... Seems as locked
Reset port...
Stop: Identify [ v2.83 ] 32 sec
Start: FRP Safe. Keep Userdata [ v2.83 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init...
PORT (0000) Tx: 0x1F A device attached to the system is not functioning Fail
Stop: FRP Safe. Keep Userdata [ v2.83 ] 6 sec
Start: FRP Safe. Keep Userdata [ v2.83 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init... Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
Sec Level: 0x00000005; Mode: SBC+SDA
BROM ver: 0xFF; BL ver: 0x03; [PRELOADER PORT]
SoC supported by Boot [FF] FireFly: Yes
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
Agent:
[7c77dd2d] E:\New folder\cm2\boot\Vivo\2022-12\MTK_AllInOne_DA_2.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 4 bbk
Sending DA1... Ok [1|1|-1|0]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: PRELOADER EXT_RAM initialized
Boot DA2... Ok [1|1|0|0]
DA Sync... Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC CID: 150100445836384D420912CACA031843 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445836384D42 [DX68MB] PRV: 0x09
Serial: 315279875 0x12CACA03
MM/YY: 1/2021
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: BA122F13D74B3BBBE4A48728F6BA6A62
MEID: 19706CBE7F70B58EE239DD416C151A8E
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
USB: HIGH-SPEED
Boot done 3 sec Adjusted: Yes, Allow errors: Yes
Load partition table... Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 47 entries
Device has no slots
Probe boot...
disk: recovery;gzip;ramdisk size 0x4712400;boot;gzip;ramdisk size 0x1B4200; Finished 1 sec
Probe core...
Mount [ext4] cust 0x0015A88000/04000000
Found [dynpart] super
Mount [ext4] system@super 0x0053900000/CC73C000
Mount [ext4] vendor@super 0x01202C3000/27B95000
Mount [ext4] product@super 0x0147FA0000/53392000 Ok 1 sec
SW: vivo/2026/2026:11/RP1A.200720.012/compiler1021181211:user/release-keys
Product Brand: vivo
Product Device: 2026
Product Model: V2026
Product Name: 2026
Patch Level: RP1A.200720.012
Display ID: RP1A.200720.012 release-keys
Product Info: k65v1_64_bsp
SW: full_k65v1_64_bsp-user 11 RP1A.200720.012 eng.compil.20241021.181531 release-keys
SW Version: eng.compil.20241021.181531
Ver. CodeName: REL
Sec. Patch: 2023-05-01
Build Time: 10/21/2024 10:12:11 AM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Device ID: vivo-v2026-2026e-k65v1-64-bsp
Strategy: [vivo]
Firmware ID: MT6765_V2026_OSv11_RP1A.200720.012_k65v1_64_bsp_vivo
Android ver: 11
UserDataFS: [ext4] unknown CacheFS: [ext4]
Reset FRP...
Reset...
#1 of 2... Ok
Verify...
#1 of 2...
Continue? Yes Ok
Completed(1)
Reset: Smart...
Reset...
#1 of 1... Ok
Verify...
#1 of 1...
Continue? Yes Ok
If FRP still active, make Wipe or Userdata reset
Reset port...
Stop: FRP Safe. Keep Userdata [ v2.83 ] 14 sec
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init... Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
Sec Level: 0x00000005; Mode: SBC+SDA
BROM ver: 0xFF; BL ver: 0x03; [PRELOADER PORT]
SoC supported by Boot [FF] FireFly: Yes
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
Agent:
[7c77dd2d] E:\New folder\cm2\boot\Vivo\2022-12\MTK_AllInOne_DA_2.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 4 bbk
Sending DA1... Ok [1|1|-1|0]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: PRELOADER EXT_RAM initialized
Boot DA2... Ok [1|1|0|0]
DA Sync... Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC CID: 150100445836384D420912CACA031843 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445836384D42 [DX68MB] PRV: 0x09
Serial: 315279875 0x12CACA03
MM/YY: 1/2021
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: BA122F13D74B3BBBE4A48728F6BA6A62
MEID: 19706CBE7F70B58EE239DD416C151A8E
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
USB: HIGH-SPEED
Boot done 13 sec Adjusted: Yes, Allow errors: Yes
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
RPMB size 0x400000
RPMB counter 0x000001EA
RPMB is UNI-Type. Memory IC can be swaped between UNI-Type devices
Load partition table... Ok 16 us
GPT Ok
Partition table: PGPT [0x64] 47 entries
Read [preloader]... Ok
Preloader (0) MT6765 preloader_k65v1_64_bsp.bin with 9 memory types [e7529b95] slots: no
Read [preloader_backup]... Ok
Preloader (1) MT6765 preloader_k65v1_64_bsp.bin with 9 memory types [e7529b95] slots: no
Probe LK...
lk [1fa4d706] k65v1_64_bsp-23c3fa0-20221130200527-20241021183020
get modem info... BBK_R0MP1_K65V1_64_BSP_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V136_6_P187
Secondary RPMB... Off
Probe FRP... Most probably: Off
Probe bootloader... Seems as locked
Reset port...
Stop: Identify [ v2.83 ] 32 sec
Start: FRP Safe. Keep Userdata [ v2.83 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init...
PORT (0000) Tx: 0x1F A device attached to the system is not functioning Fail
Stop: FRP Safe. Keep Userdata [ v2.83 ] 6 sec
Start: FRP Safe. Keep Userdata [ v2.83 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: Off
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ PRELOADER PORT #8 ] MediaTek PreLoader USB VCOM_V1632 (Android) (COM8)
Waiting for boot Ack...
Boot Init... Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
Sec Level: 0x00000005; Mode: SBC+SDA
BROM ver: 0xFF; BL ver: 0x03; [PRELOADER PORT]
SoC supported by Boot [FF] FireFly: Yes
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
Agent:
[7c77dd2d] E:\New folder\cm2\boot\Vivo\2022-12\MTK_AllInOne_DA_2.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 4 bbk
Sending DA1... Ok [1|1|-1|0]
Jump to DA... Ok
Sync... Ok
DA sync... Ok
Set PowerKey... Ok
Set PowerSource... Ok
Set ChecksumLevel [both]... Ok
DA Set Params... Ok
Mode: PRELOADER EXT_RAM initialized
Boot DA2... Ok [1|1|0|0]
DA Sync... Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC CID: 150100445836384D420912CACA031843 crc Ok
Vendor: Samsung OEM: 0x0100 ID: 445836384D42 [DX68MB] PRV: 0x09
Serial: 315279875 0x12CACA03
MM/YY: 1/2021
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x00400000 4.00 Mb
USER: 0x747C00000 29.12 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: BA122F13D74B3BBBE4A48728F6BA6A62
MEID: 19706CBE7F70B58EE239DD416C151A8E
SOCID: 3A7D7AFFDC2766990F2A17DB119D90D2A2DE43997BF5BE765C7B891F68E96951
USB: HIGH-SPEED
Boot done 3 sec Adjusted: Yes, Allow errors: Yes
Load partition table... Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 47 entries
Device has no slots
Probe boot...
disk: recovery;gzip;ramdisk size 0x4712400;boot;gzip;ramdisk size 0x1B4200; Finished 1 sec
Probe core...
Mount [ext4] cust 0x0015A88000/04000000
Found [dynpart] super
Mount [ext4] system@super 0x0053900000/CC73C000
Mount [ext4] vendor@super 0x01202C3000/27B95000
Mount [ext4] product@super 0x0147FA0000/53392000 Ok 1 sec
SW: vivo/2026/2026:11/RP1A.200720.012/compiler1021181211:user/release-keys
Product Brand: vivo
Product Device: 2026
Product Model: V2026
Product Name: 2026
Patch Level: RP1A.200720.012
Display ID: RP1A.200720.012 release-keys
Product Info: k65v1_64_bsp
SW: full_k65v1_64_bsp-user 11 RP1A.200720.012 eng.compil.20241021.181531 release-keys
SW Version: eng.compil.20241021.181531
Ver. CodeName: REL
Sec. Patch: 2023-05-01
Build Time: 10/21/2024 10:12:11 AM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Device ID: vivo-v2026-2026e-k65v1-64-bsp
Strategy: [vivo]
Firmware ID: MT6765_V2026_OSv11_RP1A.200720.012_k65v1_64_bsp_vivo
Android ver: 11
UserDataFS: [ext4] unknown CacheFS: [ext4]
Reset FRP...
Reset...
#1 of 2... Ok
Verify...
#1 of 2...
Continue? Yes Ok
Completed(1)
Reset: Smart...
Reset...
#1 of 1... Ok
Verify...
#1 of 1...
Continue? Yes Ok
If FRP still active, make Wipe or Userdata reset
Reset port...
Stop: FRP Safe. Keep Userdata [ v2.83 ] 14 sec