fastboot: hold [Volume Down] and power-on
BROM: hold [Volume Down] and connect cable
Alternative: Xiaomi => water-2
5 DA available, try it one-by-one
DA selected: Xiaomi | Redmi-A2_A2+_water | MTK_AllInOne_DA.2022-04-10.3365c4d2.bin | preloader_water.bin
fastboot: hold [Volume Down] and power-on
BROM: hold [Volume Down] and connect cable
Alternative: Xiaomi => water-2
5 DA available, try it one-by-one
Start: Identify [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
Sec Level: 0x000000E7; Mode: SBC+SLA+SDA+EXT
Ver: 0x05 BL: 0xFE [BOOTROM]
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
SLA: Local Auth
[Forced mode]
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID
Agent:
[42c76018] E:\New folder\cm2\boot\0_base\base_v2216\MTK_AllInOne_DA.2022-04-10.3365c4d2.bin
[b307cb3a] E:\New folder\cm2\boot\Xiaomi\Redmi-A2_A2+_water\preloader_water.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Sending DA1...
Ok [1|1|1|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM [1|1|1|0]
EXT_RAM NOT initialized
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
Init EMI via preloader_water.bin
EMI: MT6765 preloader_water.bin with 7 memory types slots: no
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|1|1|7]
DA Sync...
Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE90000000 58.25 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: 0A288AC8F88563268C7B686224E2DBF3
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 27 sec
Storage [MMC] Life State: OK
Storage OTP Status: Unlocked
Storage [MMC] RPMB State: RPMB Key programmed [UNUSABLE]
Load partition table...
Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 56 entries
rpmb engine: On
RPMB size 0x1000000
RPMB counter 0x0000024E
If process will stop later - try with [SW info] Off
Get slot info...
Active slot(v3): b
Probe boot...
boot: boot_b;gzip;ramdisk size 0x1505100;
Ok 1 sec
Product Brand: Redmi
Product Device: water
Product Model: water
Product Name: water_global
SW: Redmi/water_global/water:12/SP1A.210812.016/V14.0.36.0.TGOMIXM:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016
SW Version: V14.0.36.0.TGOMIXM
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2024-11-01
Build Time: 11/4/2024 11:07:17 AM
Product Info: water
SW: vnd_water-user 12 SP1A.210812.016 V14.0.36.0.TGOMIXM release-keys
Product Manfct: Xiaomi
Product Board: water
Board Platform: mt6765
Device ID: redmi-xiaomi-water-water-global
Strategy: [xiaomi]
Firmware ID: MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020
Probe userdata...
Load userdata 0x4000...
Ok
userData enc: encrypted
Backup exist: E:\New folder\cm2\backup\MT6765__36A61A9E5817BCE3E2B8FF121A607A08.7z
get modem info...
XIAOMI_S0MP1_K6765V1_64_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V236_4_P29
Secondary RPMB...
Off
Probe preloader...
Read [preloader]...
Ok
EMI: MT6765 preloader_water.bin with 9 memory types slots: no
Probe LK...
lk_b [bad1b8b8] water-f26cca4ec-20240429142611-20241104191155
Probe FRP...
Most probably: Off
Probe bootloader...
Seems as locked
Probe Mi Account...
Account is Off or not detected
Verify [DA] data...
Ok 1 sec
Reset port...
Stop: Identify [ v2.81 ] 29 sec
Start: FRP Safe. Keep Userdata [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
PORT (0000) Tx: 0x1F A device attached to the system is not functioning
Fail
Stop: FRP Safe. Keep Userdata [ v2.81 ] 6 sec
Start: FRP Safe. Keep Userdata [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
Sec Level: 0x000000E7; Mode: SBC+SLA+SDA+EXT
Ver: 0x05 BL: 0xFE [BOOTROM]
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
SLA: Local Auth
[Forced mode]
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID
Agent:
[42c76018] E:\New folder\cm2\boot\0_base\base_v2216\MTK_AllInOne_DA.2022-04-10.3365c4d2.bin
[b307cb3a] E:\New folder\cm2\boot\Xiaomi\Redmi-A2_A2+_water\preloader_water.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Sending DA1...
Ok [1|1|1|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM [1|1|1|0]
EXT_RAM NOT initialized
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
Init EMI via preloader_water.bin
EMI: MT6765 preloader_water.bin with 7 memory types slots: no
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|1|1|7]
DA Sync...
Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE90000000 58.25 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: 0A288AC8F88563268C7B686224E2DBF3
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 23 sec
Load partition table...
Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 56 entries
Get slot info...
Active slot(v3): b
Probe boot...
boot: boot_b;gzip;ramdisk size 0x1505100;
Ok 1 sec
Product Brand: Redmi
Product Device: water
Product Model: water
Product Name: water_global
SW: Redmi/water_global/water:12/SP1A.210812.016/V14.0.36.0.TGOMIXM:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016
SW Version: V14.0.36.0.TGOMIXM
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2024-11-01
Build Time: 11/4/2024 11:07:17 AM
Product Info: water
SW: vnd_water-user 12 SP1A.210812.016 V14.0.36.0.TGOMIXM release-keys
Product Manfct: Xiaomi
Product Board: water
Board Platform: mt6765
Device ID: redmi-xiaomi-water-water-global
Strategy: [xiaomi]
Firmware ID: MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Backup exist: E:\New folder\cm2\backup\MT6765__36A61A9E5817BCE3E2B8FF121A607A08.7z
Reset FRP...
Reset...
#1 of 2...
Ok
Verify...
#1 of 2...
Ok
Completed(1)
Reset: Smart...
Noting for [xiaomi]
If FRP still active, make Wipe or Userdata reset
Reset port...
Stop: FRP Safe. Keep Userdata [ v2.81 ] 10 sec
BROM: hold [Volume Down] and connect cable
Alternative: Xiaomi => water-2
5 DA available, try it one-by-one
DA selected: Xiaomi | Redmi-A2_A2+_water | MTK_AllInOne_DA.2022-04-10.3365c4d2.bin | preloader_water.bin
fastboot: hold [Volume Down] and power-on
BROM: hold [Volume Down] and connect cable
Alternative: Xiaomi => water-2
5 DA available, try it one-by-one
Start: Identify [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
Sec Level: 0x000000E7; Mode: SBC+SLA+SDA+EXT
Ver: 0x05 BL: 0xFE [BOOTROM]
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
SLA: Local Auth
[Forced mode]
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID
Agent:
[42c76018] E:\New folder\cm2\boot\0_base\base_v2216\MTK_AllInOne_DA.2022-04-10.3365c4d2.bin
[b307cb3a] E:\New folder\cm2\boot\Xiaomi\Redmi-A2_A2+_water\preloader_water.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Sending DA1...
Ok [1|1|1|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM [1|1|1|0]
EXT_RAM NOT initialized
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
Init EMI via preloader_water.bin
EMI: MT6765 preloader_water.bin with 7 memory types slots: no
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|1|1|7]
DA Sync...
Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE90000000 58.25 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: 0A288AC8F88563268C7B686224E2DBF3
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 27 sec
Storage [MMC] Life State: OK
Storage OTP Status: Unlocked
Storage [MMC] RPMB State: RPMB Key programmed [UNUSABLE]
Load partition table...
Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 56 entries
rpmb engine: On
RPMB size 0x1000000
RPMB counter 0x0000024E
If process will stop later - try with [SW info] Off
Get slot info...
Active slot(v3): b
Probe boot...
boot: boot_b;gzip;ramdisk size 0x1505100;
Ok 1 sec
Product Brand: Redmi
Product Device: water
Product Model: water
Product Name: water_global
SW: Redmi/water_global/water:12/SP1A.210812.016/V14.0.36.0.TGOMIXM:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016
SW Version: V14.0.36.0.TGOMIXM
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2024-11-01
Build Time: 11/4/2024 11:07:17 AM
Product Info: water
SW: vnd_water-user 12 SP1A.210812.016 V14.0.36.0.TGOMIXM release-keys
Product Manfct: Xiaomi
Product Board: water
Board Platform: mt6765
Device ID: redmi-xiaomi-water-water-global
Strategy: [xiaomi]
Firmware ID: MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020
Probe userdata...
Load userdata 0x4000...
Ok
userData enc: encrypted
Backup exist: E:\New folder\cm2\backup\MT6765__36A61A9E5817BCE3E2B8FF121A607A08.7z
get modem info...
XIAOMI_S0MP1_K6765V1_64_MDBIN_PCB01_MT6765_S00.MOLY_LR12A_R3_MP_V236_4_P29
Secondary RPMB...
Off
Probe preloader...
Read [preloader]...
Ok
EMI: MT6765 preloader_water.bin with 9 memory types slots: no
Probe LK...
lk_b [bad1b8b8] water-f26cca4ec-20240429142611-20241104191155
Probe FRP...
Most probably: Off
Probe bootloader...
Seems as locked
Probe Mi Account...
Account is Off or not detected
Verify [DA] data...
Ok 1 sec
Reset port...
Stop: Identify [ v2.81 ] 29 sec
Start: FRP Safe. Keep Userdata [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
PORT (0000) Tx: 0x1F A device attached to the system is not functioning
Fail
Stop: FRP Safe. Keep Userdata [ v2.81 ] 6 sec
Start: FRP Safe. Keep Userdata [ v2.81 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #4 ] MediaTek USB Port_V1632 (COM4)
Waiting for boot Ack...
Boot Init...
Ok
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
Sec Level: 0x000000E7; Mode: SBC+SLA+SDA+EXT
Ver: 0x05 BL: 0xFE [BOOTROM]
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
SLA: Local Auth
[Forced mode]
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID
Agent:
[42c76018] E:\New folder\cm2\boot\0_base\base_v2216\MTK_AllInOne_DA.2022-04-10.3365c4d2.bin
[b307cb3a] E:\New folder\cm2\boot\Xiaomi\Redmi-A2_A2+_water\preloader_water.bin
Looking for bootchain in DA...
Found: MT6765; DA: MTK_DOWNLOAD_AGENT
Sending DA1...
Ok [1|1|1|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM [1|1|1|0]
EXT_RAM NOT initialized
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
Init EMI via preloader_water.bin
EMI: MT6765 preloader_water.bin with 7 memory types slots: no
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 2.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|1|1|7]
DA Sync...
Ok
Get hardware info...
RAM: SRAM: 0x0003A000 232.00 Kb
RAM: DRAM: 0xC0000000 3.00 Gb
EMMC
CID: 9B01005930533036340052EA174E4A57
crc Ok
Vendor: Hynix OEM: 256 ID: 593053303634 [Y0S064] PRV: 0x00
Serial: 1391073102 0x52EA174E
MM/YY: 4/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE90000000 58.25 Gb
MT6765 HWs: 0x8A00 HWv: 0xCA00 HWc: 0x0766 SWv: 0x0000 Evo: 0x0000 Cervino|P35|G35|G36|G37|G50
Type: MODERN [RAPHAEL]
RNID: 0A288AC8F88563268C7B686224E2DBF3
MEID: 36A61A9E5817BCE3E2B8FF121A607A08
SOCID: E9446B0C36C5F1A821B67EAED020916A22B780482349A1E28DE509BD6C7B469D
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 23 sec
Load partition table...
Ok 0 us
GPT Ok
Partition table: PGPT [0x64] 56 entries
Get slot info...
Active slot(v3): b
Probe boot...
boot: boot_b;gzip;ramdisk size 0x1505100;
Ok 1 sec
Product Brand: Redmi
Product Device: water
Product Model: water
Product Name: water_global
SW: Redmi/water_global/water:12/SP1A.210812.016/V14.0.36.0.TGOMIXM:user/release-keys
Patch Level: SP1A.210812.016
Display ID: SP1A.210812.016
SW Version: V14.0.36.0.TGOMIXM
Ver. CodeName: REL
Ver. Release: 12
Sec. Patch: 2024-11-01
Build Time: 11/4/2024 11:07:17 AM
Product Info: water
SW: vnd_water-user 12 SP1A.210812.016 V14.0.36.0.TGOMIXM release-keys
Product Manfct: Xiaomi
Product Board: water
Board Platform: mt6765
Device ID: redmi-xiaomi-water-water-global
Strategy: [xiaomi]
Firmware ID: MT6765_Xiaomi_water_OSv12_V14.0.36.0.TGOMIXM_SP1A.210812.016_water_Redmi
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Backup exist: E:\New folder\cm2\backup\MT6765__36A61A9E5817BCE3E2B8FF121A607A08.7z
Reset FRP...
Reset...
#1 of 2...
Ok
Verify...
#1 of 2...
Ok
Completed(1)
Reset: Smart...
Noting for [xiaomi]
If FRP still active, make Wipe or Userdata reset
Reset port...
Stop: FRP Safe. Keep Userdata [ v2.81 ] 10 sec