abdouGSM
عضو نشط
- إنضم
- 20 سبتمبر 2014
- المشاركات
- 35
- مستوى التفاعل
- 17
- النقاط
- 8
شباب ممكن ملف qcn لهاتف realme x2pro لتصحيح الرقم التسلسلي أو طريقة للدخول لوضع diag mode
مع العلم اعمل ببوكس umt ولا يريد الدخول للوضع وهاد لوغو العملية
Operation : Enable Diag
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 00005100
OPK_DATA : 801063CA6F87DE372A380B3D848AD9DADE9F0B9343EE90C62F685D60A41E696A
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SD855_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD855, UFS, 256 GB
LU Count : 6 [0x03B39400] [0x00000400] [0x00000400] [0x00000400] [0x00037000] [0x00025800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK
Brand : OPPO
Software : [Mon Jun 28 16:52:10 CST 2021]
Android Ver. : 10
Patch Level : 2021-06-05
Enable Diag Port...Data Missing!
Operation Failed.
QcFire Ver. 10.7
مع العلم اعمل ببوكس umt ولا يريد الدخول للوضع وهاد لوغو العملية
Operation : Enable Diag
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM22)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500A00 [SD855] 00005100
OPK_DATA : 801063CA6F87DE372A380B3D848AD9DADE9F0B9343EE90C62F685D60A41E696A
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SD855_002]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD855, UFS, 256 GB
LU Count : 6 [0x03B39400] [0x00000400] [0x00000400] [0x00000400] [0x00037000] [0x00025800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK
Brand : OPPO
Software : [Mon Jun 28 16:52:10 CST 2021]
Android Ver. : 10
Patch Level : 2021-06-05
Enable Diag Port...Data Missing!
Operation Failed.
QcFire Ver. 10.7
