larouci2
عضو أساسي
Device : Samsung Galaxy A23 (SM-A235F) BIT5
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM92)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : 9C04D328444AFF080141EBDAC3941A2CF3BC4FF1A6423E0201F7CE5510B8A3F8
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A235F_BIT5_001.ufl]
Preparing Loader...Done
Sending Loader [SM-A235F_BIT5_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK [Sign]
Build : A235FXXS5DXB4
Int. Build : SM-A235F_CIS_SER_QKEY0
Reset FRP... Done
Operation Finished.
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM92)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 00002000
OPK_DATA : 9C04D328444AFF080141EBDAC3941A2CF3BC4FF1A6423E0201F7CE5510B8A3F8
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A235F_BIT5_001.ufl]
Preparing Loader...Done
Sending Loader [SM-A235F_BIT5_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [78]
Reading Device Information...OK [Sign]
Build : A235FXXS5DXB4
Int. Build : SM-A235F_CIS_SER_QKEY0
Reset FRP... Done
Operation Finished.