mounirblidaa
عضو أساسي
كود:
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 9 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 54AF12C3E4D75F82BEDAFA1FA1F2E2F1
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C800 6000 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ...
Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : UL281_T528_TECNO_TD_PCB01_gprs_MT6260_S00.T528-UL281A1-AF-TD-191214V9.bin
FileVersion : T528-UL281A1-AF-TD-191214V9
[ScatCFG] : MT6260 / T528-UL281A1-AF-TD-191214V9 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\UL281_T528_TECNO_TD_PCB01_gprs_MT6260_S00\
Done!https://mega.nz/file/w0NV2ISY#PIWlHTuPW9NFMn0rFCDYlmp2Dz5Ng2mAK-wF5oFVIo4
