العمليات الناجحة على Infinity CM2SPD

[فيصل16]

Condor Plume L4 Pro (SP653) Flash Firmware


​

Card found : 00000000 , v0151
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Open : SP653_V10_20190911.pac
VER : BP_R2.0.1
LEN : 4.06 GiB
CPU : s9863a1h10
VER : SP653_V10_20190911.pac

Reading package ...
Read package finished!

Patch Level    : PPR1.180610.011
Display ID     : SP653_V10_20190911
Ver. Incmt     : 108
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 10.09.2019
Product Model  : Plume L4 Pro
Product Brand  : Condor
Product Name   : Plume_L4_Pro
Product Device : Plume_L4_Pro
Product Manfct : SPA Condor Electronics
Product Info   : Plume_L4_Pro
Product Board  : sp9863a_1h10
Board Platform : sp9863a

Operation : Flash Firmware [ v2.14 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : SP653_V10_20190911.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update PMT Ok!

Prepare target ...
Prepare Ok!

ERASE : L_RUNTIMENV1
CODE  : prodnv.img
FSIMG  : system.img
CODE  : boot.img
CODE  : sml-sign.bin
CODE  : LOGO.bmp
FSIMG  : vendor.img
UBOOT : u-boot-spl-16k-sign.bin
CODE  : gnssbdmodem.bin
CODE  : sharkl3_pubcp_DM_DSP.bin
CODE  : sharkl3_pubcp_deltanv.bin
FSIMG  : cache.img
CODE  : LOGO.bmp
UBOOT : u-boot-sign.bin
CODE  : sharkl3_pubcp_LTEA_DSP.bin
CODE  : gnssmodem.bin
CODE  : vbmeta-sign.img
ERASE : UBOOT_LOG
CODE  : dtbo.img
CODE  : sharkl3_cm4.bin
CODE  : PM_sharkl3_cm4.bin
FSIMG  : persist.img
FSIMG  : userdata.img
CODE  : recovery.img
ERASE : MISC
CODE  : tos-sign.bin
CODE  : dtb.img
CODE  : SC9600_sharkl3_pubcp_modem.dat
FSIMG  : product.img
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:08:06

 

[albargadi]

فورمات وتخطي حساب جيمايل لجهاز maxfone mf1 باختار القيمة اللي في الصورة مع التبويت بزر خفض الصوت

 

[خـليل]

السلام عليكم

مسح البيانات وحذف حساب google
Infinix hot 40i (x6528)







الله الموفق​

 

[فيصل16]

Infinix Hot 40i (X6528) Format & FRP Reset ​

​

CM2 - SP3 Service Tool v2.33
Probe UAC... Ok
Wait...
S/N: Fayçal v0164
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0

Check for updates [CM2SP3]...
You have latest version [2.33] installed

Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: https://infinity-box.com/buy/
Account: https://infinity-box.com/service/
Get list of devices... Ok
Loaded 0 new of 1720 devices
Build device list... Ok 1641
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Infinix/Hot-40i
Install... Ok
Get loader info... Ok
Finished  [ v2.33 ] 1 min 33 sec
Selected: Infinix Hot-40i Boot [FDL] Factory ufs

Operation: Connect Infinix Hot-40i Boot [FDL] Factory [v2.33]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM97) 1782:4D00
PORT (0000Tx: 0x1F A device attached to the system is not functioning
Canceled
Finished Connect [ v2.33 ] 27 sec
Reconnect device!

Operation: Connect Infinix Hot-40i Boot [FDL] Factory [v2.33]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
C:\InfinityBox\CM2SP3\boot\Infinix\Hot-40i\fdl1-sign.eb511545.ldr
C:\InfinityBox\CM2SP3\boot\Infinix\Hot-40i\fdl2-sign.eb511545.342e1bfe.2023-11.ldr
Boot[1] [+] Custom... Ok
Exec[1]... Ok
Boot ack: Spreadtrum Boot Block version 1.1
Loader ACK... Ok
Set port speed... 2000000
Enable charge... Ok
Boot[2] [+] [+]... Ok
Exec[2]... Ok
Version: 0x10
Random: 0x00
Enable RAW... Ok
Disable transcode... Ok
Loader exec [0] Ok
Dev UID: 54794f0898af202c915ebaf821efcf64b62d99a7e0de10c96a4a6d15bb5a9c53
hwid cache absent

get storage info... UFS

Load partition table...
Partitions: 75
Connected

Partitions: 75
get slots... slot: a
get sw info...
Probe boot...
AndroidInfo: vendor_boot_a;lz4;bootimage/loaded ramsidk size 0x168A9A2/33F7800;boot_a;lz4;bootimage/loaded ramsidk size 0x167883/29C700; Ok 55 sec
  Product Brand: Infinix
  Product Device: Infinix-X6528
  Product Model: Infinix X6528
  Product Name: X6528
  SW: Infinix/X6528-OP/Infinix-X6528:13/TP1A.220624.014/241118V1904:user/release-keys
  Market Name: Infinix HOT 40i
  Patch Level: TP1A.220624.014
  Display ID: X6528-F069TUVWXYBdBeBfBpCrDmDnDpEaEbEc-T-OP-241118V1904
  Product Name: X6528-OP
  Ver. CodeName: REL
  Ver. Release: 13
  Sec. Patch: 2024-11-05
  Build Time: 11/18/2024 2:26:45 AM
  Product Info: X6528
  SW: X6528-user 13 TP1A.220624.014 533 release-keys
  SW Version: 241118V1904
  Product Manfct: INFINIX
  Board Platform: ums9230
  Product Board: Infinix-X6528
Android ver: 13
UserDataFS: 0x03 [f2fs] CacheFS: 0x03 [f2fs]
Device ID: infinix-x6528-x6528-op-infinix-hot-40i
Strategy: [infinix]
Firmware ID: UMS9230_INFINIX_Infinix_X6528_OSv13_X6528-F069TUVWXYBdBeBfBpCrDmDnDpEaEbEc-T-OP-241118V1904_TP1A.220624.014_X6528
Anti-crack feature: Off
Backup 13 items to: C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c\
Read to C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c\
Reading...
Read [1/75] prodnv 64.00 Mb Ok [64.00 Mb] 20 sec
Read [2/75] miscdata 1024.00 Kb Ok [1024.00 Kb] 391 us
Read [8/75] uboot_a 3.00 Mb Ok [3.00 Mb] 969 us
Read [9/75] uboot_b 3.00 Mb Ok [3.00 Mb] 953 us
Read [13/75] l_fixnv1_a 2.00 Mb Ok [2.00 Mb] 297 us
Read [14/75] l_fixnv2_a 2.00 Mb Ok [2.00 Mb] 657 us
Read [15/75] l_fixnv1_b 2.00 Mb Ok [2.00 Mb] 297 us
Read [16/75] l_fixnv2_b 2.00 Mb Ok [2.00 Mb] 641 us
Read [70/75] tkv_a 1024.00 Kb Ok [1024.00 Kb] 328 us
Read [71/75] tkv_b 1024.00 Kb Ok [1024.00 Kb] 344 us
Read [72/75] calinv 2.00 Mb Ok [2.00 Mb] 657 us
File has only ZEROES
Read [74/75] splloader 512.00 Kb Ok [512.00 Kb] 171 us
Read [75/75] splloader_bak 512.00 Kb Ok [512.00 Kb] 172 us
Saved 13 of 13 images. 84.00 Mb of 84.00 Mb
Done 13 files
Compress: C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c\ Ok
Verify C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c.7z Verified [600a5deb]
Probe bootloader...
bootloader engine hwid fail
Bootloader state: Unknown
[MemTool] load 75 items
Finished Connect [ v2.33 ] 2 min

Operation: Reset | Format Infinix Hot-40i Boot [FDL] Factory [v2.33]
WARNING: Reset may delete ALL USER DATA!
Continue? Yes
[+] Wipe
[+] Userdata
[-] nvram
Wait...
Partitions: 75
Backup exist: C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c.7z
Process Wipe...
#1... Ok
Process Userdata...
[1] Format... Ok 0 us
[2] Format... Ok 16 us
[3] Format... Ok 16 us
Completed
Finished Reset | Format [ v2.33 ] 5 sec

Operation: FRP Safe. Keep Userdata Infinix Hot-40i Boot [FDL] Factory [v2.33]
Wait...
Partitions: 75
Backup exist: C:\InfinityBox\CM2SP3\backup\ums9230_54794f0898af202c.7z
Process FRP...
[3] Erasing... Ok 0 us
If FRP still active, make Wipe or Userdata reset
Finished FRP Safe. Keep Userdata [ v2.33 ] 1 sec
Reboot... Disconnect cable if it freez
Bye

 

[فيصل16]

Nokia C2 (TA-1204) Reset Settings + FRP​

​

Card found : Fayçal , v0164
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14

Load IDBase v8331 Ok!


Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

Wipe Ok : UserData
>>>   INFO : FRP reset require FlashMode!

Reconnect Power/Cable!

Done!
Elapsed: 00:00:26

 

[فيصل16]

Infinix Smart 8 (X6525) Erase Userdata & FRP​

​

CM2 - SP3 Service Tool v2.34
Probe UAC... Ok
Wait...
S/N: Fayçal v0164
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Build device list... Ok 1641
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Infinix/Smart-8
Install... Ok
Get loader info... Ok
Finished  [ v2.34 ] 1 min 18 sec
Selected: Infinix Smart-8 Boot [FDL] Factory ufs

Operation: Connect Infinix Smart-8 Boot [FDL] Factory [v2.34]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device not found
Canceled
Finished Connect [ v2.34 ] 26 sec
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Infinix/X6525
Install... Ok
Get loader info... Ok
Get loader info... Ok
Selected: Infinix X6525 Boot [FDL] Factory ufs

Operation: Connect Infinix X6525 Boot [FDL] Factory [v2.34]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM97) 1782:4D00
PORT (0000) Tx: 0x1F A device attached to the system is not functioning
Canceled
Finished Connect [ v2.34 ] 21 sec
Reconnect device!

Operation: Connect Infinix X6525 Boot [FDL] Factory [v2.34]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
C:\InfinityBox\CM2SP3\boot\Infinix\Smart-8\fdl1-sign.feff975d.ldr
C:\InfinityBox\CM2SP3\boot\Infinix\Smart-8\fdl2-sign.feff975d.9efebffc.2023-10.ldr
Boot[1] [+] Custom... Ok
Exec[1]... Ok
Boot ack: Spreadtrum Boot Block version 1.1
Loader ACK... Ok
Set port speed... 2000000
Enable charge... Ok
Boot[2] [+] [+]... Ok
Exec[2]... Ok
Version: 0x10
Random: 0x00
Enable RAW... Ok
Disable transcode... Ok
Loader exec [0] Ok
Dev UID: c1cdcabca60ec8e6f9a39a8f94f49cbe25ab514e2b666bee1ab83375063cb3b3
hwid cache absent

get storage info... UFS

Load partition table...
Partitions: 75
Connected
[MemTool] load 75 items
Finished Connect [ v2.34 ] 22 sec

Operation: FRP Complete. Erase Userdata Infinix X6525 Boot [FDL] Factory [v2.34]
Wait...
Partitions: 75
Backup 13 items to: C:\InfinityBox\CM2SP3\backup\none_c1cdcabca60ec8e6\
Reading...
Read [1/75] prodnv 64.00 Mb Ok [64.00 Mb] 20 sec
Read [2/75] miscdata 1024.00 Kb Ok [1024.00 Kb] 344 us
Read [8/75] uboot_a 3.00 Mb Ok [3.00 Mb] 969 us
Read [9/75] uboot_b 3.00 Mb Ok [3.00 Mb] 984 us
Read [13/75] l_fixnv1_a 2.00 Mb Ok [2.00 Mb] 328 us
Read [14/75] l_fixnv2_a 2.00 Mb Ok [2.00 Mb] 656 us
Read [15/75] l_fixnv1_b 2.00 Mb Ok [2.00 Mb] 296 us
Read [16/75] l_fixnv2_b 2.00 Mb Ok [2.00 Mb] 656 us
Read [69/75] calinv 2.00 Mb Ok [2.00 Mb] 656 us
File has only ZEROES
Read [71/75] tkv_a 1024.00 Kb Ok [1024.00 Kb] 343 us
Read [72/75] tkv_b 1024.00 Kb Ok [1024.00 Kb] 344 us
Read [74/75] splloader 512.00 Kb Ok [512.00 Kb] 172 us
Read [75/75] splloader_bak 512.00 Kb Ok [512.00 Kb] 171 us
Saved 13 of 13 [84.00 Mb] to C:\InfinityBox\CM2SP3\backup\none_c1cdcabca60ec8e6\
Done 13 files
Compress: C:\InfinityBox\CM2SP3\backup\none_c1cdcabca60ec8e6\ Ok
Verify C:\InfinityBox\CM2SP3\backup\none_c1cdcabca60ec8e6.7z Verified [bf2ab9a9]
Process FRP...
[3] Erasing... Ok 16 us
Process Userdata...
[1] Format... Ok 0 us
[2] Format... Ok 0 us
[3] Format... Ok 0 us
Completed
Finished FRP Complete. Erase Userdata [ v2.34 ] 41 sec

 

[ALICHAIMA]

REALME NOT 50 [RMX-3834] FRP RESET
​

 

[فيصل16]

Itel P55 (A666Ln) FRP & Erase Userdata​

​

CM2 - SP3 Service Tool v2.34
Probe UAC... Ok
Wait...
S/N: Fayçal v0164
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0

Check for updates [CM2SP3]...
Installed v2.34
Infinity CM2SP3 v2.35
- ADB On/Off feature updated to get more itel/infinix/tecno models supported
- flashing issue fixed for number of models

Required firmware v0164

Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: https://infinity-box.com/buy/
Account: https://infinity-box.com/service/
Get list of devices... Ok
Loaded 0 new of 1720 devices
Build device list... Ok 1641
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get iTel/P55
Install... Ok
Get loader info... Ok
Finished  [ v2.34 ] 1 min 30 sec
Selected: iTel P55 Boot [FF] FireFly
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory

Operation: Connect iTel P55 Boot [FF] FireFly [v2.34]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 66edbb718bee59e3348955a511584c3c8a33a4c0f39aff547264825ee61cfccd
stored 6 hwid cache items

get storage info...
CMD 0x71 0x8E PHONE_WAIT_INPUT_TIMEOUT
Storage is not initialized or not supported
Select connection mode [Boot [FDL] Factory]
Canceled
Finished Connect [ v2.34 ] 27 sec
Selected: iTel P55 Boot [FDL] Factory
For advanced features use Boot [FF] FireFly

Operation: Connect iTel P55 Boot [FDL] Factory [v2.34]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
C:\InfinityBox\CM2SP3\boot\iTel\P55\fdl1-sign.ded82ab1.ldr
C:\InfinityBox\CM2SP3\boot\iTel\P55\fdl2-sign.ded82ab1.9a07fc4d.2024-07.ldr
Boot[1] [+] Custom... Ok
Exec[1]... Ok
Boot ack: Spreadtrum Boot Block version 1.1
Loader ACK... Ok
Set port speed... 2000000
Enable charge... Ok
Boot[2] [+] [+]... Ok
Exec[2]... Ok
Version: 0x10
Random: 0x00
Enable RAW... Ok
Disable transcode... Ok
Loader exec [0] Ok
Dev UID: 66edbb718bee59e3348955a511584c3c8a33a4c0f39aff547264825ee61cfccd
loaded 4 hwid cache items

get storage info... UFS

Load partition table...
Partitions: 75
Connected
[MemTool] load 75 items
Finished Connect [ v2.34 ] 35 sec

Operation: FRP Complete. Erase Userdata iTel P55 Boot [FDL] Factory [v2.34]
Wait...
Partitions: 75
Backup 13 items to: C:\InfinityBox\CM2SP3\backup\none_66edbb718bee59e3\
Reading...
Read [1/75] prodnv 64.00 Mb Ok [64.00 Mb] 21 sec
Read [2/75] miscdata 1024.00 Kb Ok [1024.00 Kb] 375 us
Read [8/75] uboot_a 3.00 Mb Ok [3.00 Mb] 968 us
Read [9/75] uboot_b 3.00 Mb Ok [3.00 Mb] 1 sec
Read [13/75] l_fixnv1_a 2.00 Mb Ok [2.00 Mb] 297 us
Read [14/75] l_fixnv2_a 2.00 Mb Ok [2.00 Mb] 656 us
Read [15/75] l_fixnv1_b 2.00 Mb Ok [2.00 Mb] 313 us
Read [16/75] l_fixnv2_b 2.00 Mb Ok [2.00 Mb] 656 us
Read [70/75] tkv_a 1024.00 Kb Ok [1024.00 Kb] 344 us
Read [71/75] tkv_b 1024.00 Kb Ok [1024.00 Kb] 344 us
Read [72/75] calinv 2.00 Mb Ok [2.00 Mb] 641 us
File has only ZEROES
Read [74/75] splloader 512.00 Kb Ok [512.00 Kb] 172 us
Read [75/75] splloader_bak 512.00 Kb Ok [512.00 Kb] 188 us
Saved 13 of 13 [84.00 Mb] to C:\InfinityBox\CM2SP3\backup\none_66edbb718bee59e3\
Done 13 files
Compress: C:\InfinityBox\CM2SP3\backup\none_66edbb718bee59e3\ Ok
Verify C:\InfinityBox\CM2SP3\backup\none_66edbb718bee59e3.7z Verified [1c0c008f]
Process FRP...
[3] Erasing... Ok 0 us
Process Userdata...
[1] Format... Ok 0 us
[2] Format... Ok 0 us
[3] Format... Ok 0 us
Completed
Finished FRP Complete. Erase Userdata [ v2.34 ] 42 sec

 

[فيصل16]

Infinix Smart-7-HD (X6516) Erase Userdata & FRP Reset




​

CM2 - SP3 Service Tool v2.36
Probe UAC... Ok
Wait...
S/N: Fayçal v0165
Initalize log engine... Ok
Build directories tree...
Firmware files: C:\Users\fayca\Desktop\
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0
Build device list... Ok 1641
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Infinix/Smart-7-HD
Install... Ok
Get loader info... Ok
Finished  [ v2.36 ] 1 min 37 sec
Selected: Infinix Smart-7-HD Boot [FF] FireFly mmc
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory

Operation: Connect Infinix Smart-7-HD Boot [FF] FireFly [v2.36]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD WCN AT (COM311) 18D1:4EE8
PORT (0000) Tx: 0x79 The semaphore timeout period has expired
Canceled
Finished Connect [ v2.36 ] 40 sec
Reconnect device!

Operation: Connect Infinix Smart-7-HD Boot [FF] FireFly [v2.36]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM302) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 4ed24f9a1ca558292d132b269a5a3b68fd6617e78d03c8f76f364a422a1d14b8
stored 6 hwid cache items

get storage info... MMC
EMMC CID: D62D004D4D43363447510D8BD4938A87 crc Ok
  Vendor: Foresee OEM: 11520 ID: 4D4D43363447 [MMC64G] PRV: 0x51
  Serial: 227267731 0x0D8BD493
  MM/YY: 8/2023
CSD: D04F01328F5903FFFFFFFFEF8A400001
  temp_write_protect: False
  perm_write_protect: False
  wp_group: 0x10 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 04
  ERASE_GROUP_DEF: 0x0400
  BOOT_BUS_WIDTH: 0x00
  PARTITION_CONFIG: 0x08
  RST_N_FUNCTION: 0x01
  PART_S_COMPLETED: False
  BOOT size: 0x400000
  RPMB size: 0x400000 4.00 Mb
  WP_GRP_SIZE: 0x800000 8.00 Mb
  Size: Market 64 Gb Actual 0xE90280000 58.25 Gb
  EOL: Status: Normal: Less than 80% reserved blocks used
  EOL_A: SLC status: 0% - 10% used
  EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_4ed24f9a1ca55829_extcsd_00D6-Foresee_MMC64G_5.1_2025-03-15.bin

Load partition table...
Load primary GPT 0x0000/80000... Ok
Primary GPT Ok
Partitions: 71
Connected
[MemTool] load 71 items
Finished Connect [ v2.36 ] 12 sec

Operation: FRP Complete. Erase Userdata Infinix Smart-7-HD Boot [FF] FireFly [v2.36]
Wait...
Partitions: 71
Process FRP...
[3] Erasing... Ok 719 us
Process Userdata...
[1] Format... Ok 45 sec
[2] Format... Ok 7 sec
[3] Format... Ok 5 sec
Completed
Finished FRP Complete. Erase Userdata [ v2.36 ] 1 min

 

[فيصل16]

ACE Buzz 4 Pro Erase Userdata & FRP Reset




​

 

[فيصل16]

Realme C53 (RMX3760) Erase FRP​

​

CM2 - SP3 Service Tool v2.36
Probe UAC... Ok
Wait...
S/N: Fayçal v0165
Initalize log engine... Ok
Build directories tree...
Backup files: C:\InfinityBox\CM2SP3\backup\
Backup files: 0 dirs: 0

Check for updates [CM2SP3]...
You have latest version [2.36] installed

Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: https://infinity-box.com/buy/
Account: https://infinity-box.com/service/
Get list of devices... Ok
Loaded 0 new of 1726 devices
Build device list... Ok 1729
Ready
Select SoC/Device or [Get boot files]
Select SoC/Device or [Get boot files]
Select SoC or device
Get loader info... update required
Get Realme/C53
Install... Ok
Get loader info... Ok
Finished  [ v2.36 ] 3 min 16 sec
Selected: Realme C53 Boot [FF] FireFly mmc
Boot [FF] FireFly protocol may be SLOW. For flash Read/Write use Boot [FDL] Factory

Operation: Connect Realme C53 Boot [FF] FireFly [v2.36]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device not found
Canceled
Finished Connect [ v2.36 ] 16 sec

Operation: Connect Realme C53 Boot [FF] FireFly [v2.36]
Wait...
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
Device found
PTFN: SPRD U2S Diag (COM9) 1782:4D00
boot: SPRD3
boot iLoader... Ok
start iLoader... Ok
Handshake... Ok
boot xLoader... Ok
start FireFly... Ok
Loader exec [0] Ok
Dev UID: 7938f11fbd3fde10d069e08f55eb4954e2a6d95786d06879fddb80419b441c89
stored 6 hwid cache items

get storage info... MMC
EMMC CID: 9B01005930533235360079F908B01BC3 crc Ok
  Vendor: Hynix OEM: 256 ID: 593053323536 [Y0S256] PRV: 0x00
  Serial: 2046363824 0x79F908B0
  MM/YY: 1/2024
CSD: D02701320F5903FFFFFFFFFF8A404001
  temp_write_protect: False
  perm_write_protect: False
  wp_group: 0x20 en 0x01
read extcsd... Ok
EXTCSD rev1.8 EMMC 5.1 FW: 0401
  ERASE_GROUP_DEF: 0x0400
  BOOT_BUS_WIDTH: 0x00
  PARTITION_CONFIG: 0x08
  RST_N_FUNCTION: 0x01
  PART_S_COMPLETED: False
  BOOT size: 0x400000
  RPMB size: 0x1000000 16.00 Mb
  WP_GRP_SIZE: 0x1000000 16.00 Mb
  Size: Market 256 Gb Actual 0x3A3E000000 232.97 Gb
  EOL: Status: Normal: Less than 80% reserved blocks used
  EOL_A: SLC status: 0% - 10% used
  EOL_B: MLC status: 0% - 10% used
extcsd stored: C:\InfinityBox\CM2SP3\backup\ext_csd\none_7938f11fbd3fde10_extcsd_009B-Hynix_Y0S256_5.1_2025-04-11.bin

Load partition table...
Load primary GPT 0x0000/80000... Ok
Primary GPT Ok
Partitions: 79
Connected
[MemTool] load 79 items

Partitions: 79
get slots... slot: a
get sw info...
Probe boot...
boot: vendor_boot_a;lz4;ramdisk size 0x3C0EA00;boot_a;lz4;ramdisk size 0x3CF000; Ok 26 sec
  Product Brand: realme
  Product Device: RE58C2
  Product Model: ums9230_hulk_Natv
  Product Name: RMX3760
  SW OTA Version: RMX3760export_14.C.73_3730_202502170917
  SW: realme/RMX3760/RE58C2:13/TP1A.220624.014/T.R4T2.1739756167:user/release-keys
  Patch Level: TP1A.220624.014
  Display ID: RMX3760export_14_C.73
  SW Version: 553
  Ver. CodeName: REL
  Ver. Release: 13
  Sec. Patch: 2023-11-05
  Build Time: 2/17/2025 2:13:51 AM
  Product Info: ums9230_hulk
  SW: ums9230_hulk_Natv-user 13 TP1A.220624.014 553 release-keys
  Product Manfct: realme
  Board Platform: ums9230
  Product Board: ums9230_hulk
Android ver: 13
UserDataFS: 0x03 [f2fs] CacheFS: 0x03 [f2fs]
Device ID: realme-ums9230-hulk-natv-re58c2-rmx3760
Strategy: [realme]
Firmware ID: UMS9230_realme_ums9230_hulk_Natv_OSv13_RMX3760export_14_C.73_TP1A.220624.014_ums9230_hulk
[MemTool] load 79 items
Backup 13 items to: C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760\
Reading...
Read [1/79] prodnv 64.00 Mb Ok [64.00 Mb] 57 sec
Read [2/79] miscdata 1024.00 Kb Ok [1024.00 Kb] 1 sec
Read [8/79] uboot_a 3.00 Mb Ok [3.00 Mb] 2 sec
Read [9/79] uboot_b 3.00 Mb Ok [3.00 Mb] 2 sec
Read [13/79] l_fixnv1_a 2.00 Mb Ok [2.00 Mb] 1 sec
Read [14/79] l_fixnv2_a 2.00 Mb Ok [2.00 Mb] 2 sec
Read [15/79] l_fixnv1_b 2.00 Mb Ok [2.00 Mb] 2 sec
Read [16/79] l_fixnv2_b 2.00 Mb Ok [2.00 Mb] 2 sec
Read [53/79] ocdt_a 8.00 Mb Ok [8.00 Mb] 7 sec
Read [54/79] ocdt_b 8.00 Mb Ok [8.00 Mb] 7 sec
Read [73/79] calinv 2.00 Mb Ok [2.00 Mb] 2 sec
File has only ZEROES
Read [78/79] splloader 4.00 Mb Ok [4.00 Mb] 3 sec
Read [79/79] splloader_bak 4.00 Mb Ok [4.00 Mb] 3 sec
Saved 13 of 13 [105.00 Mb] to C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760\
probe rpmb... RPMB counter 0x00000107
RPMB: C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760\rpmb_00000107.bin
RPMB size 0x1000000
Reading... Ok
Done 14 files
Compress: C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760\ Ok
Verify C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760.7z Verified [19a115d8]
Probe bootloader...
Method: known (9) known (1) b=>a
Bootloader state: Locked
Finished Connect [ v2.36 ] 5 min 2 sec

Operation: FRP Safe. Keep Userdata Realme C53 Boot [FF] FireFly [v2.36]
Wait...
Partitions: 79
Backup exist: C:\InfinityBox\CM2SP3\backup\ums9230_7938f11fbd3fde10_realme-ums9230-hulk-natv-re58c2-rmx3760.7z
Process FRP...
[3] Erasing... Ok 125 us
If FRP still active, make Wipe or Userdata reset
Finished FRP Safe. Keep Userdata [ v2.36 ] 1 sec
Reboot... Disconnect cable if it freez
PORT Disconnected 0x03E3
CMD 0x05 0x8E PHONE_WAIT_INPUT_TIMEOUT
Bye