فلاشات فلاشة هاتف wiko sunny2 6.0 16102017 ( spd cpu )

[دراجي سوفت]

السلام عليكم و رحمة الله تعالى و بركاته

تم بحمد الله حذف حساب جوجل و سحب الفلاشة على دونجل cm2 واجهة SPD ( تم التحويل الى صيغة PAC ) + سحب الفلاشة على بوكس miracle

CM2 DONGLE

انفو الهاتف​

[LEFT][SIZE=4][COLOR=#0000FF]Operation : Check/Read Info [ v1.27 ][/COLOR][/SIZE]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 86 ]
Boot Ver : [SIZE=4][COLOR=#0000FF]SC7731 C[/COLOR][/SIZE]rev eMMC Loader v2.0     
FLASH : eMMC Flash , Structure : Ok!
[SIZE=4][COLOR=#0000FF]Reading extended info[/COLOR][/SIZE] ... 

Model Name  : V2510
Model Brand : [SIZE=4][COLOR=#0000FF]WIKO[/COLOR][/SIZE]
Model Device: V2510
AndrVersion : [SIZE=4][COLOR=#0000FF]6.0[/COLOR][/SIZE]
BaseBand CPU: [SIZE=4][COLOR=#0000FF]V2510[/COLOR][/SIZE]
CompileDate : 10/16/2017 1:41:16 AM
Project Ver : MRA58K release-keys
Model Ext   : [SIZE=4][COLOR=#0000FF]SUNNY2[/COLOR][/SIZE]

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:30[/LEFT]

بيانات حذف الحساب​

[LEFT][SIZE=4][COLOR=#0000FF]Operation : Format File System / Reset Settings [ v1.27 ][/COLOR][/SIZE]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 86 ]
Boot Ver : [SIZE=4][COLOR=#0000FF]SC7731 C[/COLOR][/SIZE]rev eMMC Loader v2.0     
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000012A1F7000
State : 0x0001
Mount : /cache
Size  : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
[SIZE=4][COLOR=#0000FF]Reset Ok[/COLOR][/SIZE]!
[/LEFT]

بيانات سحب الفلاشة​

[LEFT][SIZE=4][COLOR=#0000FF]Operation : Read FullFlash [ v1.27 ][/COLOR][/SIZE]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable
 ====  Wait for phone...
Phone found! [ 86 ]
Port Opened
Boot Ver : SC7731 Crev eMMC Loader v2.0     
[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_trunck_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

[SIZE=4][COLOR=#0000FF]AndroidInfo created[/COLOR][/SIZE]
Firmware Size : [SIZE=4][COLOR=#0000FF]2428 MiB[/COLOR][/SIZE]
Saved to : D:\WIKO SUNNY2 6.0 10162017 (CM2 DONGLE)\V2510_V2510_6.0_MRA58K_release-keys_SUNNY2\
Done!

Elapsed: 00:09:53[/LEFT]

فيديو يوضح عملية السحب
[video=youtube_share;Vxui1tH0uXs]https://youtu.be/Vxui1tH0uXs[/video]

فلاشة خاصة بدونجل CM2 فقط​

فلاشة بصيغة PAC​

--------------------------------------------------------------------------

MIRACLE BOX

انفو الهاتف
​

[LEFT]  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM86
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize [SIZE=4][COLOR=#0000FF]boot32[/COLOR][/SIZE]...
  Being analyzed DATA...
  id:MRA58K release-keys
  version:[SIZE=4][COLOR=#0000FF]6.0[/COLOR][/SIZE]
  hardware:[SIZE=4][COLOR=#0000FF]V2510_V1.0.0[/COLOR][/SIZE]
  model:[SIZE=4][COLOR=#0000FF]SUNNY2[/COLOR][/SIZE]
  brand:WIKO
  manufacturer:[SIZE=4][COLOR=#0000FF]WIKO[/COLOR][/SIZE]
  Done.[/LEFT]

بيانات سحب الفلاشة​

[LEFT]  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM86
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot32...
  [SIZE=4][COLOR=#0000FF]reading,Wait[/COLOR][/SIZE]...
  prodnv...
  wfixnv1...
  splloader...
  wmodem...
  wdsp...
  wcnmodem...
  logo...
  fbootlogo...
  boot...
  recovery...
  persist...
  system...
  cache...
  Read Completed.
>>File save to: D:\WIKO SUNNY2 6.0 10162017 (MIRACLE BOX CRACK)\[SIZE=4][COLOR=#0000FF]SCxx_200830133031.mira[/COLOR][/SIZE][/LEFT]

بالتوفيق للجميع
​

 

[doux-dur]

رد: فلاشة هاتف wiko sunny2 6.0 16102017 ( spd cpu )

بارك الله فيك

 

[nissan4]

رد: فلاشة هاتف wiko sunny2 6.0 16102017 ( spd cpu )

بارك الله فيك جاري التجريب

 

[karim87]

رد: فلاشة هاتف wiko sunny2 6.0 16102017 ( spd cpu )

بارك الله فيك

 

[malike9999]

رد: فلاشة هاتف wiko sunny2 6.0 16102017 ( spd cpu )

بارك الله فيك