- إنضم
- 19 ماي 2016
- المشاركات
- 1,858
- مستوى التفاعل
- 1,642
- النقاط
- 113
اقدم لكم فلاشة WOLDER MITAB 3G FREEDOM مسحوبة بدونجل NCK
Brand: Wolder
Model: miTab_Freedom
Manufacturer: Wolder
Version: 4.4.2
التاب
انفو التاب
كود:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 23:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ce520000 [7.224 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: KOT49H
Display ID: wolder_miTab_Freedom
Version: 4.4.2
Build Date: Wed Nov 26 10:17:59 CST 2014
Model: miTab_Freedom
Region: ES
Mediatek Version Release: ALPS.KK1.MP1.V2.11
Brand: Wolder
Device: miTab_Freedom
Manufacturer: Wolder
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Wait untill phone will start charging.
[0]All done.انفو السحب
كود:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 23:00:00:00:00:00:00:00
EMMC CID: 8801034E4361726420 : 00000000000000
EMMC UA SIZE: 0x1ce100000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1ce520000 [7.224 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: KOT49H
Display ID: wolder_miTab_Freedom
Version: 4.4.2
Build Date: Wed Nov 26 10:17:59 CST 2014
Model: miTab_Freedom
Region: ES
Mediatek Version Release: ALPS.KK1.MP1.V2.11
Brand: Wolder
Device: miTab_Freedom
Manufacturer: Wolder
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EBR2
Partition: EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: FAT
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x1500000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 357447060369644
IMEI[2] from NVRAM: 357447060369651
Start processing PROTECT_F
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x2700000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x5180000 - LEN: 0x40000000
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6582_EMMC_KOT49H__4_4_2_miTab_Freedom_Wolder_2020_01_14_00_49)
Wait untill phone will start charging.
[0]All done.
الفلاشة
https://mega.nz/#!jbxU3ABT!gwDLVSXKQfD37HsAqroHxPPMQ3Ce3yw_pr8PvJjrSpU
NVRAM
https://mega.nz/#!nTpE2YLT!md0hti2NCoLfbOMJ4CwV2jNRt78ABLi6JH99PYJUwaQ
>>ملاحضة: التبويت بالضغط على زر خفض الصوت + وصل الكابل
التعديل الأخير:
