![](https://www3.0zz0.com/2019/12/31/20/107881588.jpg)
اقدم لكم اعضاء و زوار المنتدى فلاشة ZTE BLADE V6 مسحوبة بدونجل NCK
الهاتف:
![](https://www14.0zz0.com/2019/12/31/20/220369357.png)
انفو الهاتف:
كود:
Action : Boot Info. Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: LRX22G
Display ID: DIS_ES_QB18D_P635A20V1.0.1
Version: 5.0.2
Build Date: Wed Nov 25 18:14:44 CST 2015
Model: ZTE Blade V6
Brand: ZTE
Device: P635A20
Manufacturer: ZTE
Region: ES
Mediatek Version Release: DIS_ES_QB18D_P635A20V1.0.1B01
This phone have FRP partition.
IMEI[1]: 860000000000000
IMEI[2]: 867000000000000
Wait untill phone will start charging.
[0]All done.
انفو عملية السحب:
![](https://www2.0zz0.com/2019/12/31/20/342812590.png)
كود:
Action : Read Firmware. Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
BBCHIP: 321 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A484147326505 : 00000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: LRX22G
Display ID: DIS_ES_QB18D_P635A20V1.0.1
Version: 5.0.2
Build Date: Wed Nov 25 18:14:44 CST 2015
Model: ZTE Blade V6
Brand: ZTE
Device: P635A20
Manufacturer: ZTE
Region: ES
Mediatek Version Release: DIS_ES_QB18D_P635A20V1.0.1B01
IMEI[1]: 867000000000001
IMEI[2]: 867000000000000
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: lk
Partition: para
Partition: boot
Partition: recovery
Partition: logo
Partition: expdb
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: frp
Partition: nvdata
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 867409027313431
IMEI[2] from NVRAM: 867409027355440
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x5200000 - LEN: 0x600000
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0x6a00000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x6b00000 - LEN: 0x2000000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0x80000000
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6735_EMMC_LRX22G__5_0_2_ZTE Blade V6_ZTE_2019_12_31_16_19)
Wait untill phone will start charging.
[0]All done.
الفلاشة:
![](https://www10.0zz0.com/2019/12/31/20/319932597.gif)
https://mega.nz/#!Nt1ETayb!iEzX2ZyE9yHPrI2aAlST6_aVRD9DbG-hgM3cuRtxTjs
![](https://www10.0zz0.com/2019/12/31/20/319932597.gif)
NVRAM
![](https://www10.0zz0.com/2019/12/31/20/319932597.gif)
https://mega.nz/#!E8lSzSSZ!2b3CaZgyv3nAbl6O2rDbFp_6JAIrUBOQuXmOxplDieA
![](https://www10.0zz0.com/2019/12/31/20/319932597.gif)
![](https://www7.0zz0.com/2019/12/31/20/570658559.jpg)
![](https://www7.0zz0.com/2019/12/31/20/860018902.png)