تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص
- بادئ الموضوع فيصل16
- تاريخ البدء
- إنضم
- 25 فيفري 2013
- المشاركات
- 1,161
- مستوى التفاعل
- 1,657
- النقاط
- 113
رد: تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص على InfinityBox BEST
https://www.dzgsm.com/vb/threads/72224-nokia-3310-ta-1030/
https://www.dzgsm.com/vb/threads/72224-nokia-3310-ta-1030/
عمل ظبط مصنعي لجهاز Nokia C1 TA-1165
والجهاز مطفا حدد ftm واعمل reset setting
والجهاز مطفا حدد ftm واعمل reset setting
كود:
Infinity-Box BEST Nokia [HMD] Module [NK2] v1.20
Operation : Reset Settings ( Format FS ) [ v1.20 ]
Extra : FTM mode
1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!
Wait for device ...
Device not found !
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Reset Settings ( Format FS ) [ v1.20 ]
Extra : FTM mode
1. Power off device, remove battery
2. Not hold any key on device!
3. Insert battery in device!
Wait for device ...
Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!
Boot Done!
Erase BLK #0
Format Ok!
Done!
Elapsed: 00:00:42
Reconnect Power/Cable!
mounirblidaa
عضو أساسي
رد: تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص
< rm-1035 contact service <flashing
< rm-1035 contact service <flashing
MEDMED1993
عضو أساسي
- إنضم
- 4 نوفمبر 2014
- المشاركات
- 336
- مستوى التفاعل
- 281
- النقاط
- 63
رد: تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص
logicom le posh 170
[/url][/IMG]
[/url][/IMG]
logicom le posh 170
التعديل الأخير:
رد: تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص
NOKIA C1-01 RM-607WRITE FIRMWARE DONE
NOKIA C1-01 RM-607WRITE FIRMWARE DONE
كود:
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm607__04.40.mcusw
PPM : rm607__04.40.ppm_m_a
CNT : rm607__04.40.image_m_a_0596698
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---
Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF
Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_2.3_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!
Check keys...
Check done. Image can be flashed
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI : 359745040564905
PCcode : 0596698
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\359745040564905_2nd_XG213_CRT.rpl
Settings : EDM [0x8] , Block Mode , Fast CRC , Verify
===Flashing [MCU]===
File : rm607__04.40.mcusw
Image : rm607__04.40.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:00:49
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash done, time : 00:00:27
CRC check passed , 0xD471
===Flashing [PPM]===
File : rm607__04.40.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:07
Write , Start : 0x41C00000 , Len : 0x003263B0
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0x55CD
===Flashing [CNT]===
File : rm607__04.40.image_m_a_0596698
Image : package_m_a_0596698.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:01:06
Write , Start : 0x42200000 , Len : 0x00B60000
Flashing , wait ...
Region flash done, time : 00:00:13
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0x5615
Flashing done!
Total flash time : 00:02:56
Reboot phone now...رد: تجارب الاعضاء فى تفليش و قراءة الكود و مختلف الخصائص
nokia 6303 ci
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm638__10.80.mcusw
PPM : rm638__10.80.ppm_meaa
CNT : rm638__10.80.image_meaa_0594634_010
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000010000022600000001020C192102054100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 20600218D3D01049997B1E89D3AF072FCA65092C
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358276043175425
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\358276043175425_CRT.rpl
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm638__10.80.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 126 blocks
TIME : Write time : 00:00:36
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm638__10.80.ppm_meaa
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.ppm_meaa
Total writen 23 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm638__10.80.image_meaa_0594634_010
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm638__10.80.image_meaa_0594634_010
Total writen 106 blocks
TIME : Write time : 00:00:35
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:01:21
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 6303i classic
Software Info: V 10.80 21-01-11 RM-638 (c) Nokia
IMEI: 358276043175425
PPM version : V 10.80 21-01-11 RM-638 (c) Nokia MEA
Product code: 0594515
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 34 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:02:01
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:02
Phone disconected!
Connect phone on selected interface...
nokia 6303 ci
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm638__10.80.mcusw
PPM : rm638__10.80.ppm_meaa
CNT : rm638__10.80.image_meaa_0594634_010
Flashing phone now...
[Gen] Rules accepted for : RAPUxx Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BootRom] : 1st boot Ok!
ASIC ID: 000000010000022600000001020C192102054100
CPU ID : RAP3Gv4 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C35
EM1 ID: 00000C30
PUBLIC ID: 20600218D3D01049997B1E89D3AF072FCA65092C
ASIC MODE ID: 00
ROOT KEY HASH: 7B045400E1752022F9EB80B0DEA9C65D
ROM ID: 67E82268F29CEA60
Use RAP3Gv40_2nd.fg , Rev : 3.0 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use RAP3Gv40_XSR17_alg.fg , Rev : 3.0 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 108AF4DB7EC8B1B36E9D6A60F7EB2996DC7B2B5D
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 358276043175425
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\358276043175425_CRT.rpl
=== SW Version Check ===
- > REFLASHING
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm638__10.80.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 126 blocks
TIME : Write time : 00:00:36
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm638__10.80.ppm_meaa
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm638__10.80.ppm_meaa
Total writen 23 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm638__10.80.image_meaa_0594634_010
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm638__10.80.image_meaa_0594634_010
Total writen 106 blocks
TIME : Write time : 00:00:35
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:01:21
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 6303i classic
Software Info: V 10.80 21-01-11 RM-638 (c) Nokia
IMEI: 358276043175425
PPM version : V 10.80 21-01-11 RM-638 (c) Nokia MEA
Product code: 0594515
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 34 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:02:01
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:02
Phone disconected!
Connect phone on selected interface...