sAleSh
عضو أساسي
جائني اليوم هاتف ARCHOS ACCESS 50 4G من اجل حدف FRP فتمت العملية بنجاح و الحمد لله فاردت ان اغتنم الفرصة لسحب الفلاشة اصدار 7.0 و مشاركتها في منتدانا العزيز
صورة الهاتف
في واجهة CM2 نختار
معلومات الهاتف
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC loader v2.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : SCAC50AS4G
Model Brand : archos
Model Device: ac50as4g
AndrVersion : 7.0
BaseBand CPU: YK668_SP9832A_5M_VOLTE
CompileDate : 23/06/2017 06:10:36
Project Ver : YK668_ARCHOS_SCAC50AS4G_MP_20170718_V07@ARCHOS.20170623.061036.Castela
Model Ext : Archos Access 50 4G
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:35
Reconnect Power/Cable!
وهدا لوغ عمليىة تخطي FRP
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 4 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC loader v2.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
eMMC phone detected! Will use 'Safe Format' mode!
Mount : /data
Size : 0x00000001221F7000
State : 0x0001
Mount : /cache
Size : 0x0000000009600000
State : 0x0001
Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!
Android 5.x/6.x : Reset FRP Lock
Reset Ok!
Done!
كم تلاحظون في اخر اللوغ ان العملية تمت بنجاح مع ان الهاتف اصداره 7.0
لوغ الفلاشة
Card found: S/N : AXXXXXXX , v0136
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC983x] eMMC [Generic Android 7.x]
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : SCAC50AS4G
Model Brand : archos
Model Device: ac50as4g
AndrVersion : 7.0
BaseBand CPU: YK668_SP9832A_5M_VOLTE
Project Ver : YK668_ARCHOS_SCAC50AS4G_MP_20170718_V07@ARCHOS.20170623.061036.Castela
Model Ext : Archos Access 50 4G
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
AndroidInfo created
Firmware Size : 2634 MiB
Saved to : C:\Users\AKATSUKI\Desktop\ARCHOS ACCESS 50 G\YK668_SP9832A_5M_VOLTE_ac50as4g_7.0_YK668_ARCHOS_SCAC50AS4G_MP_20170718_V07@ARCHOS.20170623.061036.Castela_Archos_Access_50_4G\
Done!
رابط الفلاشة
http://www.mediafire.com/file/7x30rerbzae1f6i/Archos_Access_50_4G.rar
كلمة السر :
dzgsm
بالتوفيق للجميع
التعديل الأخير:
