تجارب الأعضاء الناجحة على واجهة Octoplus Huawei Tool

[DZ-Developer]

رد: تجارب الأعضاء الناجحة على واجهة Octoplus Huawei Tool

[FONT=&quot]Reset FRP[/FONT][FONT=&quot] Huawei P10 Plus [[/FONT][FONT=&quot]VKY-L29[/FONT][FONT=&quot]]
[/FONT]

[COLOR=#000000]Welcome to Octoplus Huawei Software v.‪1.3.3‬[/COLOR]

[COLOR=#000000]To enable 'Manufacture' mode dial[/COLOR]
[COLOR=#000000]- for Qualcomm and Hisilicon based models: *#*#2846579#*#*[/COLOR]
[COLOR=#000000]ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode[/COLOR]
[COLOR=#000000]- for MTK based models: *#*#14789632#*#*[/COLOR]
[COLOR=#000000]ProjectMenu > Background Settings > USB Port Settings > Debug Mode[/COLOR]

[COLOR=#000000]To enable 'Fastboot' mode[/COLOR]
[COLOR=#000000]1. Power off the phone. Remove SD and SIM cards[/COLOR]
[COLOR=#000000]2. Press 'Vol-' and insert USB cable[/COLOR]
[COLOR=#000000]3. Wait until phone enters 'Fastboot' mode[/COLOR]

[COLOR=#000000]To enable 'Upgrade' mode[/COLOR]
[COLOR=#000000]1. Power off the phone. Remove SD and SIM cards[/COLOR]
[COLOR=#000000]2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable[/COLOR]
[COLOR=#000000]3. Wait until phone enters 'Upgrade mode'[/COLOR]
[COLOR=#000000]
Found COM ports:[/COLOR]
[COLOR=#000000]1: COM6 USB Serial Port[/COLOR]
[COLOR=#000000]2: COM1 Communications Port[/COLOR]
[COLOR=#000000]3: COM10 RIM Virtual Serial Port v2[/COLOR]
[COLOR=#000000]4: COM11 RIM Virtual Serial Port v2[/COLOR]
[COLOR=#000000]
Job ID: [/COLOR][COLOR=#551700]0000000001BA3350[/COLOR]
[COLOR=#000000]2022-11-16 00:14:13[/COLOR]
[COLOR=#000000]Starting Reset FRP[/COLOR]
[COLOR=#000000]Selected phone model: ‪[/COLOR][COLOR=#551700]VKY-L29[/COLOR][COLOR=#000000]‬[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]HUAWEI USB COM 1.0[/COLOR][COLOR=#000000] port...[/COLOR]
[COLOR=#000000]Detected [/COLOR][COLOR=#551700]‪HUAWEI USB COM 1.0‬[/COLOR][COLOR=#000000] port[/COLOR]
[COLOR=#000000]Phone connect successfully[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]UCE[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#cc0100]Error: Failed write ‪UCE‬ partition[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]UCE[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#cc0100]Error: Failed write ‪UCE‬ partition[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]UCE[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#000000]Writing ‪[/COLOR][COLOR=#551700]FASTBOOT[/COLOR][COLOR=#000000]‬ partition...[/COLOR]
[COLOR=#000000]Bootloader Update successfully[/COLOR]
[COLOR=#000000]Rebooting to fastboot mode...[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]Fastboot[/COLOR][COLOR=#000000] devices...[/COLOR]
[COLOR=#000000]Found android device: [/COLOR][COLOR=#551700]QYJ7N17328003363[/COLOR]
[COLOR=#000000]Detected [/COLOR][COLOR=#551700]‪Android Sooner Single ADB Interface‬[/COLOR][COLOR=#000000] port[/COLOR]
[COLOR=#000000]Reading basic data...[/COLOR]
[COLOR=#000000]Device Model: [/COLOR][COLOR=#551700]‪VKY-L29‬[/COLOR]
[COLOR=#000000]System: [/COLOR][COLOR=#551700]‪VKY-L29 9.1.0.252(C185E2R1P9)‬[/COLOR]
[COLOR=#000000]Android Version: ‪[/COLOR][COLOR=#551700]9[/COLOR][COLOR=#000000]‬[/COLOR]
[COLOR=#000000]FB Lock State: [/COLOR][COLOR=#551700]‪UNLOCKED‬[/COLOR]
[COLOR=#000000]User Lock State: [/COLOR][COLOR=#551700]‪LOCKED‬[/COLOR]
[COLOR=#000000]Writing FRP partition..[/COLOR]
[COLOR=#000000]Reset FRP done.[/COLOR]
[COLOR=#000000]Performed by ‪1.3.3‬ Software version.[/COLOR]

 

[larouci2]

‪​

JNY-LX1​

Reset ​

Huawei ID​

​

Welcome to Octoplus Huawei Software v.â€ھ1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1

2022-11-17 14:07:50
Starting Reset Huawei ID
Selected phone model: â€ھJNY-LX1‬
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected â€ھHUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Writing â€ھXLOADER‬ partition...
Writing â€ھUCE‬ partition...
Writing â€ھFASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7TSX206R052987
Detected â€ھAndroid Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: â€ھJNY-LX1‬
System: â€ھJNY-L21 12.0.0.242(C432E5R5P2)‬
Android Version: â€ھ10‬
Base Version: â€ھJNY-LGRP2-OVS 102.0.0.242‬
Custom Version: â€ھJNY-L21-CUST 102.0.0.5(C432)‬
Preload Version: â€ھJNY-L21-PRELOAD 102.0.0.2(C432R5)‬
C_Version: â€ھC432‬
D_Version: â€ھD000‬
FB Lock State: â€ھLOCKED‬
User Lock State: â€ھLOCKED‬
Downloading resource...
Connecting to the credit server...
Username: oct_JRfKJx8
Checking balance...
Your balance: 20 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: â€ھUNLOCKED‬
User Lock State: â€ھLOCKED‬
Device Model: â€ھJNY-LX1‬
System: â€ھJNY-L21 12.0.0.242(C432E5R5P2)‬
MEID: â€ھA00000B895FCEA‬
IMEI A: â€ھ86xxxxxxxxxxxxx‬
IMEI B: â€ھ86xxxxxxxxxxxxx‬
Downloading resource...
Writing secure data...
Resetting Huawei ID...
Reset Huawei ID done.
Performed by â€ھ1.3.3‬ Software version.

 

[DZ-Developer]

رد: تجارب الأعضاء الناجحة على واجهة Octoplus Huawei Tool

Honor 8X [JSN-AL00] Downgrade Done

2.0 Version HarmonyOS:

JSN-AL00a 2.0.0.270 (C00E230R1P8)

10 Downgrade to Version Android:

JSN-AL00 10.0.0.174(C00E70R3P4)
===================================================
Base Package: JSN-LGRP1-CHN 10.0.0.174
Cust Package: JSN-AL00-CUST 10.0.0.70(C00)
Preload PKG  : JSN-AL00-PRELOAD 10.0.0.4(C00R3)
===================================================

1- Select JSN-L23 go to Write Firmware select Hisilicon Factory Mode
2- Click Read Backup Firmware
Connect the Phone with TP + Use Cable HarmonyOS

Log operation:

[COLOR=#000000]Job ID: [/COLOR][COLOR=#551700]0000000001985383[/COLOR]
[COLOR=#000000]2022-12-18 12:33:44[/COLOR]
[COLOR=#000000]Starting Backup Firmware[/COLOR]
[COLOR=#000000]Selected phone model: [/COLOR][COLOR=#551700]JSN-L23[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]HUAWEI USB COM 1.0[/COLOR][COLOR=#000000] port...[/COLOR]
[COLOR=#000000]Detected [/COLOR][COLOR=#551700]HUAWEI USB COM 1.0 [/COLOR][COLOR=#000000]port[/COLOR]
[COLOR=#000000]Phone connect successfully[/COLOR]
[COLOR=#000000]Writing bootloader [/COLOR][COLOR=#551700]KIRIN710_V1[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Initializing remote service connection...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]XLOADER [/COLOR][COLOR=#000000]partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]UCE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]FASTBOOT[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Bootloader Update successfully[/COLOR]
[COLOR=#000000]Rebooting to fastboot mode...[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]Fastboot[/COLOR][COLOR=#000000] devices...[/COLOR]
[COLOR=#000000]Found android device: [/COLOR][COLOR=#551700]7XBRX18B08000772[/COLOR]
[COLOR=#000000]Device Model: [/COLOR][COLOR=#551700]JSN-AL00a[/COLOR]
[COLOR=#000000]System: [/COLOR][COLOR=#551700]JSN-AL10 2.0.0.270(C00E230R1P8)[/COLOR]
[COLOR=#000000]Removing firmware protection...[/COLOR]
[COLOR=#000000]Connecting to server...[/COLOR]
[COLOR=#000000]Waiting for a response from the server...[/COLOR]
[COLOR=#000000]FB Lock State: [/COLOR][COLOR=#551700]UNLOCKED[/COLOR]
[COLOR=#000000]User Lock State: [/COLOR][COLOR=#551700]LOCKED[/COLOR]
[COLOR=#000000]Creating a list of partitions...[/COLOR]
[COLOR=#000000]Detected EMMC partition table[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]BOOTFAIL_INFO[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]CACHE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]CERTIFICATION[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]CUST[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]DDR_PARA[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]DFX[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]DTO[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]DTS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ENG_SYSTEM[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ENG_VENDOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ERECOVERY_KERNEL[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ERECOVERY_RAMDISK[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ERECOVERY_VBMETA[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ERECOVERY_VENDOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]FASTBOOT[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]FRP[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]FW_HIFI[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]FW_LPM3[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HDCP[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HHEE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HIBENCH_DATA[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HISEE_ENCOS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HISEE_FS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]HISEE_IMG[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ISP_BOOT[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ISP_FIRMWARE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]KERNEL[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]KPATCH[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MISC[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEM_DRIVER[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEM_FW[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEM_OM[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEM_PATCH_NV[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEM_SECURE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEMNVM_BACKUP[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEMNVM_CUST[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEMNVM_FACTORY[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEMNVM_IMG[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]MODEMNVM_UPDATE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]NVME[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]ODM[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]OEMINFO[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PATCH[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PERSIST[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PREAS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PREAVS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PRELOAD[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PRODUCT[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]PTABLE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RAMDISK[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RECOVERY_RAMDISK[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RECOVERY_VBMETA[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RECOVERY_VENDOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RESERVED1[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RESERVED6[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RESERVED7[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RESERVED8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]RRECORD[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]SECURE_STORAGE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]SENSORHUB[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]SPLASH2[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]SUPER[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]TEEOS[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]TRUSTFIRMWARE[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA_CUST[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA_HW_PRODUCT[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA_ODM[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA_SYSTEM[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VBMETA_VENDOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VECTOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VENDOR[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VERITYKEY[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VERSION[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VRL[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]VRL_BACKUP[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Backuping partition [/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Rebooting device...[/COLOR]
[COLOR=#000000]Backup Firmware done.[/COLOR]
[COLOR=#000000]Performed by 1.3.3 Software version.[/COLOR][COLOR=#000000]
[/COLOR]

3- Write Firmware Android 10 with Hisilicon Factory Mode
Connect the Phone with TP + Use Cable HarmonyOS

Log operation:

[COLOR=#000000]Job ID: [/COLOR][COLOR=#551700]00000000019855E6[/COLOR]
[COLOR=#000000]2022-12-18 13:14:28[/COLOR]
[COLOR=#000000]Starting Write Firmware(Factory mode)[/COLOR]
[COLOR=#000000]Selected phone model: [/COLOR][COLOR=#551700]JSN-L23[/COLOR]
[COLOR=#000000]Selected base ptable file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_base/PTABLE.APP[/COLOR]
[COLOR=#000000]Selected cust ptable file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_cust_JSN-AL00_all_cn/PTABLE.APP[/COLOR]
[COLOR=#000000]Selected preload ptable file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_preload_JSN-AL00_all_cn_R3/PTABLE.APP[/COLOR]
[COLOR=#000000]Selected base update file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_base/UPDATE.APP[/COLOR]
[COLOR=#000000]Selected cust update file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_cust_JSN-AL00_all_cn/UPDATE.APP[/COLOR]
[COLOR=#000000]Selected preload base file: F:/MOBILE PHONE/HUAWEI/JSN-AL00 Honor 8X/JSN-AL00 10.0.0.174(C00E70R3P4)/update_full_preload_JSN-AL00_all_cn_R3/UPDATE.APP[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]PACKAGE_TYPE: [/COLOR][COLOR=#551700]ONLINE_UPDATE[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]HUAWEI USB COM 1.0[/COLOR][COLOR=#000000] port...[/COLOR]
[COLOR=#000000]Detected [/COLOR][COLOR=#551700]HUAWEI USB COM 1.0[/COLOR][COLOR=#000000] port[/COLOR]
[COLOR=#000000]Phone connect successfully[/COLOR]
[COLOR=#000000]Writing bootloader [/COLOR][COLOR=#551700]KIRIN710_V1[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Initializing remote service connection...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]UCE [/COLOR][COLOR=#000000]partition...[/COLOR]
[COLOR=#000000]Writing  [/COLOR][COLOR=#551700]FASTBOOT[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Bootloader Update successfully[/COLOR]
[COLOR=#000000]Rebooting to fastboot mode...[/COLOR]
[COLOR=#000000]Searching [/COLOR][COLOR=#551700]Fastboot[/COLOR][COLOR=#000000] devices...[/COLOR]
[COLOR=#000000]Found android device: [/COLOR][COLOR=#551700]7XBRX18B08000772[/COLOR]
[COLOR=#000000]Device Model: [/COLOR][COLOR=#551700]JSN-AL00a[/COLOR]
[COLOR=#000000]System: [/COLOR][COLOR=#551700]JSN-AL10 2.0.0.270(C00E230R1P8)[/COLOR]
[COLOR=#000000]Removing firmware protection...[/COLOR]
[COLOR=#000000]Connecting to server...[/COLOR]
[COLOR=#000000]Waiting for a response from the server...[/COLOR]
[COLOR=#000000]FB Lock State: [/COLOR][COLOR=#551700]UNLOCKED[/COLOR]
[COLOR=#000000]User Lock State: [/COLOR][COLOR=#551700]LOCKED[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]PTABLE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]PTABLE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]XLOADER[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]FASTBOOT[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]HHEE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]DTS[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]TRUSTFIRMWARE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]FW_LPM3[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]DTO[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]KERNEL[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]TEEOS[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ISP_FIRMWARE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VECTOR[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]SENSORHUB[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]FW_HIFI[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]MODEMNVM_UPDATE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]MODEMNVM_CUST[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]RECOVERY_RAMDISK[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]RECOVERY_VENDOR[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]RECOVERY_VBMETA[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ERECOVERY_KERNEL[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ERECOVERY_RAMDISK[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ERECOVERY_VENDOR[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ERECOVERY_VBMETA[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ENG_VENDOR[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]ENG_SYSTEM[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]CACHE[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]RAMDISK[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]SUPER[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]1[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]2[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]3[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]4[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]5[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]6[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]7[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000] chunk from [/COLOR][COLOR=#551700]8[/COLOR][COLOR=#000000]...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA_SYSTEM[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA_VENDOR[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA_ODM[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA_HW_PRODUCT[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VBMETA_CUST[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]MODEM_FW[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]HISEE_IMG[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]HISEE_FS[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]PATCH[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]VERSION[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Writing [/COLOR][COLOR=#551700]PRELOAD[/COLOR][COLOR=#000000] partition...[/COLOR]
[COLOR=#000000]Write Firmware(Factory mode) done.[/COLOR]
[COLOR=#000000]Performed by 1.3.3 Software version.[/COLOR]

 

[فيصل16]

Huawei P30 Lite (MAR LX1A) Frp Lock Remove With TP

Huawei P30 Lite (MAR LX1A) Frp Lock Remove With TP

​

Job ID: 0000000001BADB2C
2022-11-17 17:12:32
Starting Reset FRP
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: BUEQY20123002349
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪MAR-LX1M‬
System: ‪MAR-L21MEA 12.0.0.225(C185E2R4P1)‬
Android Version: ‪10‬
Base Version: ‪MAR-LGRP2-OVS 102.0.0.225‬
Custom Version: ‪MAR-L21MEA-CUST 102.0.0.2(C185)‬
Preload Version: ‪MAR-L21MEA-PRELOAD 102.0.0.1(C185R4)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪MAR-LX1M‬
System: ‪MAR-L21MEA 12.0.0.225(C185E2R4P1)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.3‬ Software version.

 

[فيصل16]

HUAWEI GR5 2017 DUAL SIM ( BLL-L21 ) FRP Reset Via Fastboot

HUAWEI GR5 2017 DUAL SIM ( BLL-L21 ) FRP Reset Via Fastboot

​

 

[فيصل16]

Honor Play (COR-L29) Reset Huawei ID

Honor Play (COR-L29) Reset Huawei ID

​

Job ID: 0000000001EB8F722023-04-26 08:44:12
Starting Reset Huawei ID
Selected phone model: ‪COR-L29‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: XTX7N18913001543
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪COR-L29‬
System: ‪COR-L29 9.1.0.406(C432E2R1P9)‬
Android Version: ‪9‬
C_Version: ‪C432‬
D_Version: ‪D000‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Resetting Huawei ID...
Rebooting device...
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.

 

[فيصل16]

Huawei Y5 (2019) (AMN-LX9) FRP Reset

Huawei Y5 (2019) (AMN-LX9) FRP Reset

​

ob ID: 0000000001ED62882023-04-29 12:42:55
Starting Reset FRP
Selected phone model: ‪AMN-LX9‬
Please, put your device in Factory mode (use "ON/OFF Factory Mode" option or Hardware Test Point) and insert USB cable
Detected ‪MediaTek USB Port_V1632‬ port
Handshake done
Detecting Chip Version...
HW Chip : MT6761
HW Version : 8A00.CA01.0200.0000
Brom Version: 5
Boot Loader Version: FE
Downloading resource...
Sending Authentication Data...
Downloading resource...
Downloading resource...
Using MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898 download agent...
Found a suitable Download agent
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Downloading resource...
Initializing Memory Flash...
Initialization completed
Sending Loader...
Mobile Status: SYNC
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 15028 Mb
IMEI A: ‪86***********83‬
IMEI B: ‪86***********07‬
Reading Partition Table
Reading FRP Partition
Removing FRP secure data...
Reset FRP done.
Performed by ‪1.3.3‬ Software version.

 

[ProfKefah]

ازالة حساب جوجل لجهاز Huawei y8s jkm-l21x 9.1.0.362‬ بالتيست بوينت

السلام عليكم

Welcome to Octoplus Huawei Software v.‪1.3.4‬


To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode


To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode


To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'


Found COM ports:
1: COM1 Communications Port
2: COM14 USB Serial Port


Job ID: 000000000225BB11
2023-08-09 17:26:04
Starting Reset FRP
Selected phone model: ‪JKM-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: PPF6R20429024868
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JKM-LX1‬
System: ‪JKM-LGRP2-OVS 9.1.0.299‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.362‬
Custom Version: ‪JKM-LX1-CUST 9.1.0.2(C185)‬
Preload Version: ‪JKM-L21X-PRELOAD 9.1.0.2(C185R1)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: PROFKEFAH
Checking balance...
Your balance: 200 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JKM-LX1‬
System: ‪JKM-LGRP2-OVS 9.1.0.299‬




S/N: ‪PPF6R20429024868‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

​

​

 

[فيصل16]

Huawei Y7 Prime (TRT-L21A) Repair IMEI Via Test Point

​

​

Job ID: 00000000018EB8E5
2023-11-27 15:46:46
Starting Repair Info
Selected phone model: ‪TRT-L21A‬
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to server...
Authorization is successful
Device Model: ‪TRT-TL10‬
Firmware: ‪HL1TRTM-TL10‬
Boot: ‪Chipset-msm8940 5.1.0.1(0IS2)_SBL1‬
System: ‪System 5.1.0.78(0F44)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪000000000000000‬
IMEI B: ‪861658046898741‬
Bluetooth MAC: ‪00:00:00:00:00:00‬
WiFi MAC: ‪00:00:00:00:00:00‬
Downloading resource...
New IMEI A: ‪86***********46‬
New IMEI B: ‪86***********55‬
Repairing IMEI A...
Repairing IMEI B...
Resetting your device
Repair Info done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei P9 Lite 2017 (PRA-LA1) FRP Reset Via Test Point





​

Job ID: 00000000018F09F1
2023-12-05 18:03:43
Starting Reset FRP
Selected phone model: ‪PRA-LA1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: PSEDU17216000346
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪PRA-LA1‬
System: ‪NRD90M test-keys‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Writing FRP partition..
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei P Smart (FIG-LX1) Reset FRP Via Test Point​

​

Job ID: 00000000027248FC
2024-01-02 13:58:06
Starting Reset FRP
Selected phone model: ‪FIG-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: XED7N18B02003855
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪FIG-LX1‬
System: ‪FIG-LX1 9.1.0.235(C432E25R1P5)‬
Android Version: ‪9‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Writing FRP partition..
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei Y9 (2019) (JKM-LX2) Reset FRP Via Test Point​

​

Job ID: 00000000018EE19B
2024-05-07 16:36:08
Starting Reset FRP
Selected phone model: ‪JKM-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: 2DR4C18A30007917
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JKM-LX2‬
System: ‪JKM-LGRP2-OVS 9.1.0.282‬
Android Version: ‪9‬
Base Version: ‪JKM-LGRP2-OVS 9.1.0.282‬
C_Version: ‪C636‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 1 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JKM-LX2‬
System: ‪JKM-LGRP2-OVS 9.1.0.282‬
MEID: ‪00000000000000‬
IMEI A: ‪86***********38‬
IMEI B: ‪86***********45‬
S/N: ‪2D**********917‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei Y9s (STK-L21) Reset FRP Via Test Point​

​

Job ID: 00000000018F2FF8
2024-05-28 11:17:11
Starting Reset FRP
Selected phone model: ‪STK-L21‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: 2ABVB20707002239
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪STK-L21‬
System: ‪STK-L21MDV 10.0.0.323(C185E7R3P1)‬
Android Version: ‪10‬
Base Version: ‪STK-LGRP3-OVS 10.0.0.323‬
Custom Version: ‪STK-L21MDV-CUST 10.0.0.7(C185)‬
Preload Version: ‪STK-L21MDV-PRELOAD 10.0.0.1(C185R3)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 1 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪STK-L21‬
System: ‪STK-L21MDV 10.0.0.323(C185E7R3P1)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei Honor 9 Lite (LLD-L31) Reset FRP Via Test Point



​

Job ID: 00000000018FEC7D
2024-06-01 09:58:22
Starting Reset FRP
Selected phone model: ‪LLD-L31‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: FPM4C18810003772
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪LLD-L31‬
System: ‪LLD-L31 9.1.0.189(C432E10R1P4)‬
Android Version: ‪9‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Writing FRP partition..
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei P9 (EVA-L19) Reset FRP Via Test Point​

​

Job ID: 00000000019019D1
2024-07-31 10:48:47
Starting Reset FRP
Selected phone model: ‪EVA-L19‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: XVV7N16B09002391
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪EVA-L19‬
System: ‪EVA-L19C185B405‬
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Writing FRP partition..
Reset FRP done.
Performed by ‪1.3.4‬ Software version.

 

[فيصل16]

Huawei Y7 (2019) (DUB-LX1) Reset FRP Via Test Point​

​

Job ID: 000000000190C1AD
2025-03-30 11:45:35
Starting Reset FRP
Selected phone model: ‪DUB-LX1‬
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Downloading resource...
Searching Qualcomm HS-USB QDLoader 9008 port...
Please, reconnect battery, connect USB cable with attached Test Point on your phone!
Detected ‪Qualcomm HS-USB QDLoader 9008‬ port
Connecting to device...
Hadshaking...
Sending loader Qualcomm Snapdragon 450V.0.mbn...
Loader send successfully
Reconnecting, please wait...
Configuring device...
Reading partition table...
Removing FRP lock...
Reset FRP done.
Performed by ‪1.3.5.4‬ Software version.