تفليش وتعريب GALAXY SII I9100 بالإصدار 4.1.2 بنجاح على OCTOPUS
الكابل المستعمل: MICRO USB
أولا: تأكد من أن البطارية مشحونة جيدا ثم إدخال الجهاز وضع Downloader كما هو موضح في الصورة
ثانيا: عملية تحويل الـ FIRMWARE (الفلاشة) إلى صيغة .OCT
ثالثا: إختيار الـFIRMWARE (الفلاشة) ثم التفليش
الفلاشة ملف واحد بعد التحويل إلى صيغة OCT
لوغ العملية:
كود:
[COLOR="#000000"]Welcome to Octopus Box Samsung software version 1.8.4
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial ********
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close ********
9. Go to dial ********
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I9100XWLSD_I9100OJVLS6_I9100XXLS8_HOME.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9100 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing PIT section...
PIT section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed[/COLOR].ملف PIT في المرفقات
رابط الفلاشة المستخدمة قبل تحويلها إلى صيغة OCT
التعديل الأخير:
