حصري firmware doogee x5 + nvram

hossam قال:
60722hlmjo.gif


فلاشة doogee x5على شكل scatter


مسحوبة من هاتف سليم بواسطة InfinityBox CM2MTK


k3l7rzvfyl8y8tsnj.gif



Read Info

كود: 
Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505070FA5ACCBB2E7
Initialize Memory ... 
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505070FA5ACCBB2E7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xCBD90A875DDF24DB512BDA86B36331D7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : DOOGEE
ProdName  : DOOGEE
ProdModel : X5
Device    : DOOGEE
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : DOOGEE-X5-AH-Android5.1-V03-2015.12.09

Done!
Elapsed: 00:00:14
Reconnect Power/Cable!

Read Flash + nvram


كود: 
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505070FA5ACCBB2E7
Initialize Memory ... 
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505070FA5ACCBB2E7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xCBD90A875DDF24DB512BDA86B36331D7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
USBDL : Init HSUSB Ok!

xGPT : Normalize settings Ok!

Brand     : DOOGEE
ProdName  : DOOGEE
ProdModel : X5
Device    : DOOGEE
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : DOOGEE-X5-AH-Android5.1-V03-2015.12.09

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1390 MiB
Scatter saved to : C:\Users\uutrz\Desktop\Nouveau dossier (6)\MT6580__DOOGEE__X5__DOOGEE__5.1__DOOGEE-X5-AH-Android5.1-V03-2015.12.09\

All done!

Done!
Elapsed: 00:07:38
Reconnect Power/Cable!


Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505070FA5ACCBB2E7
Initialize Memory ... 
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505070FA5ACCBB2E7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xCBD90A875DDF24DB512BDA86B36331D7
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
[Info] : BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P4_1_wg_n

NVM Read Ok, MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P4_1_wg_n_eMMC.spnv

Done!
Elapsed: 00:00:30
Reconnect Power/Cable!


index.jpg


أنقر للتوسيع...
الرابط لا يعمل
 
نرجو من المشرف ان يمسح هذه المشاركة
 
شكرا أخي ممكن تحدت الرابط لانه لا يعمل
 
ممكن ترفع الفلاشة علي رابط آخر لانه اصبح غير متاح
 
الملف لم يعد متاح،هل يمكنك ان تعطيني الملف من جديد
 
ممكن تقوم باعادة رفع الفلاشة الرابط لا يعمل
 
رد: حصري firmware doogee x5 + nvram

Le fichier que vous essayez de télécharger n’est plus proposé.
Cela pourrait être dû aux raisons suivantes :
Le fichier a été retiré en raison du non-respect des CGU/PUA.
L’URL est invalide. Le lien auquel vous tentez d’accéder n’existe pas.
Le fichier a été supprimé par l’utilisateur.
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
عودة
أعلى