WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.
DCTxBB5 v2.3.0.0
-----------------
1. BB5 RAPU ****d Products USB Flashing / UI support added:
RM-754 (801T)
2. DCT4 INFINEON ****d Products USB Flashing / UI support added:
RM-694,RM-761,RM-799,RM-800 (X2-02,200,201,201.1)
LG_GSM v2.3.0.0
-----------------
1. Infineon Egold Boot Fixed (was broken in v 2.2.0.3)
2. Infineon E500,KM553,KM555,KM555e,KM555g,KM555R added (FL,CUL)
3. Infineon GT370,GU230GO,S367 added (FL,CUL,DUL,IM)
4. Infineon T370,T375,T385,T385b,T395,T500GO,T505GO,T565,
T565b,T575 added (FL,DUL)
5. MTK: A290 added (FL,3xIM)
6. MTK: USB Support for UI Functions (Select COM on Phone)
7. WiFi MAC Address Write Added for Infineon and MTK platforms.
SAMs v2.2.0.3
--------------
SWIFT
T456-FIDO,T456-ROGERS added (UNL,SECT,IM,FL)
SWIFT-AEROFONE
[Patch MSL] fixed for DUOS Products.
E1086W,E1153i,E1182-CHN,E1195L,E1200,E1200M,E1200M-CHN,
E1200T,E1202,E1205,E1205L,E1205M-CHN,E1205T,E1207,E1207T-IND,
E1207-MEA,E1220T,E1230T,E1232B,E1232D added (PUNL,PIM,FL)
C3520,C3780,C3782,E2250,E2252 added (UNL,SECT,IM,FL)
E2220,E2222L (UNL,SECT,IM)
SWIFT-3G
C3630,C5190,C5530,E3217B,E3217L,S5270K,S5270L,S568 0
added (UNL,SECT,FL)
C5010,E3210,E3213,S5610 Direct Unlock Fixed.
IMEI Repair Added for Almost All Models:
C3630,E2310,E2313,S3710,S5270,S5610,..
INFINEON
C3310,C3310R,C3312,C3312R,C3313K,C3330,C3332,C3350 ,C3350M,
E2230L,E2350B,E2600,E2600M,S3800,S3802,S3802W,S522 0,S5220R,
S5222,S5222R,S5229,S5292,S5296 added (CUNL,PUNL,PIM,FL,UFL)
E1151 Missing boot fixed.
E1151 IMEI Rebuild and Direct Unlock added (AT Mode)
Note: Need make Boot Mode Info before use of AT Mode.
QUALCOMM
M210S,T356 Added.
BROADCOM
S5380B,S5380D,S5380F,S5380G,S5780D,S7250,S7250D added (UFL)
السلام علكيم :
إليكم تحديث جديد لبوكس ساراس ufsx + hwk WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.
DCTxBB5 v2.3.0.1
-----------------
1. Updated UFS Drivers Support.
LG_GSM v2.3.0.1
-----------------
1. Infineon Bug fixed (present in V 2.3.0.0)
2. Added access to UFST [PWR-R/T] Port (UART Rx,Tx)
SAMs v2.3.0.1
--------------
SWIFT-AEROFONE
C3262,S3332,S3570,S3572 added (UNL,SECT,IM,FL)
SWIFT-3G
A157 IMEI Rebuild fixed.
INFINEON
Infineon Bug fixed (present in V 2.3.0.0)
S3800W added (CUNL,PUNL,PIM,FL,UFL)
COMMON
Fixed "UFSx Devices not Found" on USB 3.0 Host Controller.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall old HWK Setup Suite and HWK Support Suite and use the new UFSx Support Suite.
SAMs V 2.3.0.3
--------------
SWIFT-AEROFONE
E1500 added (PUNL,PIM,FL)
S3330,S5270Y added (UNL,SECT,IM,FL)
ANDROID
More Products and Features added.
UFST only, see separate ********.
COMMON
Fixed bugs (Long time of DHLT & Keys Calc, USB HDD issue, ...)
Customers who are experiencing the panel hanging on "check box" or "update box", should try to use the older driver and see if the problem is gone.
How to install older driver.
1. Make sure your UFSx device is not connected to your PC.
2. Right click "My Computer" and "select Manage"
3. Click "Universal Serial Bus controllers"
4. Right click "UFSx Device, (c) SarasSoft" and select "Uninstall"
5. Right click your computer **** at the top of the list and select "Scan for hardware changes"
6. When the Hardware Wizard opens, Select "No, not this time" and then Click "Next"
7. Select "Install from a list or specific ******** (Advanced)" and then Click "Next"
8. Make sure "Search for the driver in these ********s" is selected, "Search removable media ..." is deselected and "Include this ******** in the search:" is selected
9. Click "Browse" and either:-
for x86 ******s - C:\Program Files\SarasSoft\UFS\UFS_USB_Driver\OLD
for x64 ******s - C:\Program Files (x86)\SarasSoft\UFS\UFS_USB_Driver\OLD
10.Click "Next", click "Continue anyway" to any messages and then "Finish"
You have now installed the old driver, when you run UFS_Panel, you should see these driver versions:-
Versions: Ufs2xx.dll 3.1.19, Ufs2xx.sys 2.6.0
if you see
Versions: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30
then you are still using the latest drivers and you should try the above process again.
رد: آخر اصدارات البوكس هنا UFSx+HWK Release 10/03/2014
Release 05//07/2014
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall (old HWK Setup Suite and HWK Support Suite) or existing (UFSx Support Suite) and use the new UFSx Support Suite.
SAMs V 2.3.0.4
-----------------
INFINEON
SM-B312E added (CUNL,PUNL,PIM,FL,UFL) ANDROID
More Products and Features added. UFS Turbo & UFST only, see separate Document.
COMMON
Added File Archive Path Selection.
Customers who are experiencing the panel hanging on "check box" or "update box", should try to use the older driver and see if the problem is gone.
How to install older driver.
------------------------------
1. Make sure your UFSx device is connected to your PC.
2. Right click "My Computer" and "select Manage"
3. Click "Universal Serial Bus controllers"
4. Right click "UFSx Device, (c) SarasSoft" and select "Uninstall"
5. Right click your computer name at the top of the list and select "Scan for hardware changes"
6. When the Hardware Wizard opens, Select "No, not this time" and then Click "Next"
7. Select "Install from a list or specific location (Advanced)" and then Click "Next"
8. Make sure "Search for the driver in these locations" is selected, "Search removable media ..." is deselected and "Include this location in the search:" is selected
9. Click "Browse" and select either:-
for x86 Windows - C:\Program Files\SarasSoft\UFS\UFS_USB_Driver\OLD
for x64 Windows - C:\Program Files (x86)\SarasSoft\UFS\UFS_USB_Driver\OLD
10.Click "Next", click "Continue anyway" to any messages and then "Finish"
You have now installed the old driver, when you run UFS_Panel, you should see these driver versions:-
Versions: Ufs2xx.dll 3.1.19, Ufs2xx.sys 2.6.0
if you see
Versions: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30
then you are still using the latest drivers and you should try the above process again.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
You need to uninstall (old HWK Setup Suite and HWK Support Suite) or existing (UFSx Support Suite) and use the new UFSx Support Suite.
SAMs V 2.3.0.4 build32
-------------------------- ANDROID
More Products and Features added. UFST only, see separate Document.
LG_GSM V 2.3.0.4 build 32
------------------------------ 1. Common: Added File Archive Path Selection.
2. Fixed some common bugs.
Customers who are experiencing the panel hanging on "check box" or "update box", should try to use the older driver and see if the problem is gone.
How to install older driver.
------------------------------ 1. Make sure your UFSx device is connected to your PC.
2. Right click "My Computer" and "select Manage"
3. Click "Universal Serial Bus controllers"
4. Right click "UFSx Device, (c) SarasSoft" and select "Uninstall"
5. Right click your computer name at the top of the list and select "Scan for hardware changes"
6. When the Hardware Wizard opens, Select "No, not this time" and then Click "Next"
7. Select "Install from a list or specific location (Advanced)" and then Click "Next"
8. Make sure "Search for the driver in these locations" is selected, "Search removable media ..." is deselected and "Include this location in the search:" is selected
9. Click "Browse" and select either:-
for x86 Windows - C:\Program Files\SarasSoft\UFS\UFS_USB_Driver\OLD
for x64 Windows - C:\Program Files (x86)\SarasSoft\UFS\UFS_USB_Driver\OLD
10.Click "Next", click "Continue anyway" to any messages and then "Finish"
You have now installed the old driver, when you run UFS_Panel, you should see these driver versions:-
Versions: Ufs2xx.dll 3.1.19, Ufs2xx.sys 2.6.0
if you see
Versions: Ufs2xx.dll 3.2.7, Ufs2xx.sys 2.8.30
then you are still using the latest drivers and you should try the above process again.
Samsung V 2.3.0.5 build 65
--------------------------
ANDROID for UFST and UFS Turbo Only
New Products added (Total, more than 1140 models)
Full Support added for:
G360AZ, G531F, G531H, G531M, G531Y, T239, T239M, T561M, T561Y, T562
Partial Support for:
404SC, G920R6, G920R7, G925R6, G925R7, J5008, J500F, J7008
For Android Model Details see Samsung_Android_Info document.
هذا الموقع يستخدم ملفات تعريف الارتباط (الكوكيز ) للمساعدة في تخصيص المحتوى وتخصيص تجربتك والحفاظ على تسجيل دخولك إذا قمت بالتسجيل.
من خلال الاستمرار في استخدام هذا الموقع، فإنك توافق على استخدامنا لملفات تعريف الارتباط.