بفضل الله تم التوصل الى نقاط ريبير LG K8_K350z" EMMC" دون نزعها
مع العلم ان النفطة cmd يجب حكها قليلا
كود:
[LEFT]Welcome to Medusa Pro Software version 1.7.6.
Started.
Reader #0: FT SCR2000 0
Reader #1: FT SCR2000 1
Reader #2: FT SCR2000 2
Reader #3: FT SCR2000 3
Reader #4: Generic EMV Smartcard Reader 0
Reader #5: Generic EMV Smartcard Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G1e
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473165050802E3F4618309
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G1e
Product revision : 0.8
Product serial number : (hex) 2E3F461
Manufacturing date : 08/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 786432
Number of sectors : 5668864
Device Manufacturer :lge
Device Platform :mt6735
Build ID :MRA58K
Display Build ID :MRA58K
Release ID :6.0
Device Model :LG-K350
Device Name :mm1v_global_com
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Architecture ABI List :armeabi-v7a,armeabi
Build Description :mm1v_global_com-user 6.0 MRA58K 162010015035f release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G1e_31_03_2019_10_15_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: misc2 (00001C00, 00004000) 8 MB
P03: ftm (00005C00, 00004000) 8 MB
P04: nvram (00009C00, 00002800) 5 MB
P05: protect1 (0000C400, 00005000) 10 MB
P06: protect2 (00011400, 00005000) 10 MB
P07: lk (00016400, 00001000) 2048 KB
P08: lkbak (00017400, 00001000) 2048 KB
P09: laf (00018400, 0000E000) 28 MB
P10: para (00026400, 00000400) 512 KB
P11: boot (00026800, 00008000) 16 MB
P12: recovery (0002E800, 00008000) 16 MB
P13: recoverybak (00036800, 00008000) 16 MB
P14: logo (0003E800, 00004000) 8 MB
P15: lo_bak_go (00042800, 00004000) 8 MB
P16: expdb (00046800, 00005000) 10 MB
P17: seccfg (0004B800, 00000400) 512 KB
P18: oemkeystore (0004BC00, 00001000) 2048 KB
P19: secro (0004CC00, 00003000) 6 MB
P20: keystore (0004FC00, 00004000) 8 MB
P21: tee1 (00053C00, 00002800) 5 MB
P22: tee2 (00056400, 00002800) 5 MB
P23: eksst (00058C00, 00000400) 512 KB
P24: encrypt (00059000, 00000400) 512 KB
P25: persist_lg (00059400, 00004000) 8 MB
P26: mpt (0005D400, 0000B000) 22 MB
P27: persistent (00068400, 00001000) 2048 KB
P28: lgfota (00069400, 00005000) 10 MB
P29: cust (0006E400, 00019000) 50 MB
P30: rct (00087400, 00000800) 1024 KB
P31: factory (00087C00, 0000E000) 28 MB
P32: persist (00095C00, 00018000) 48 MB
P33: efuse (000ADC00, 00000400) 512 KB
P34: frp (000AE000, 00000800) 1024 KB
P35: nvdata (000AE800, 00011800) 35 MB
P36: system (000C0000, 00568000) 2768 MB
P37: cache (00628000, 00098000) 304 MB
P38: OP (006C0000, 000B0000) 352 MB
P39: userdata (00770000, 00717C00) 3632 MB
P40: flashinfo (00E87C00, 00008000) 16 MB
Switched to boot area partition 1.
Added partition BOOT1 to constructor file.
Switched to boot area partition 2.
Added partition BOOT2 to constructor file.
Switched to user area.
Added partition GPT to constructor file.
Added partition proinfo to constructor file.
Added partition misc2 to constructor file.
Added partition ftm to constructor file.
Added partition nvram to constructor file.
Added partition protect1 to constructor file.
Added partition protect2 to constructor file.
Added partition lk to constructor file.
Added partition lkbak to constructor file.
Added partition laf to constructor file.
Added partition para to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition recoverybak to constructor file.
Added partition logo to constructor file.
Added partition lo_bak_go to constructor file.
Added partition expdb to constructor file.
Added partition seccfg to constructor file.
Added partition oemkeystore to constructor file.
Added partition secro to constructor file.
Added partition keystore to constructor file.
Added partition tee1 to constructor file.
Added partition tee2 to constructor file.
Added partition eksst to constructor file.
Added partition encrypt to constructor file.
Added partition persist_lg to constructor file.
Added partition mpt to constructor file.
Added partition persistent to constructor file.
Added partition lgfota to constructor file.
Added partition cust to constructor file.
Added partition rct to constructor file.
Added partition factory to constructor file.
Added partition persist to constructor file.
Added partition efuse to constructor file.
Added partition frp to constructor file.
Added partition nvdata to constructor file.
SRF "C:/Users/HOCINE/Desktop/111/LG_k8_K350.srf" has been installed successfully.
[/LEFT]
ملاحظة: هذه اول تجربة لي من هذا النوع. لدى قررت مشاركة الملف معكم
يمنع نقل الموضوع الى بذكر المصدر
باسورد مشاهدة المرفق password.txt
و في الاخير تحياتي لكم