D-TECH D5L MT6739 تغيير الذاكرة eMMC

.:: Sebti _ Gsm ::.

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,672
مستوى التفاعل
2,946
النقاط
113
الإقامة
Ghardaïa
السلام عليكم و رحمة الله تعالى و بركاته
تحية عطرة للمشرفين ولإدارة المنتدى وأعضائها وزوار المنتدى الكرام

تم بعون الله تغيير ذاكرة eMMC BGA-221 هاتف D-TECH D5L
المشكل الاساسي للهاتف: يتوفق على اللوغو الاول. عند وضعه في الشاحن لا يظهر نسبة الشحن (يظهر علامة الشحن فقط)
لا يقبل تمرير الـ Firmware على CM2MT2
كود: 
Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 1543221416
Product Model  : D5-L
Product Brand  : D-TECH
Product Name   : D5-L
Product Device : D5-L
Product Manfct : D-TECH
Product Info   : k39tv1_bsp
Product Board  : k39tv1_bsp
Board Platform : mt6739
Firmware ID: MT6739_D-TECH_D5-L_OSv8.1.0_O11019_k39tv1_bsp
Verify firmware [MT6739_D-TECH_D5-L_OSv8.1.0_O11019_k39tv1_bsp]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020
Upload file to server?
No
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM (Android) (COM38)
MODE [0]: PRELOADER PORT; PORT: 38
Waiting for BOOT ACK...
BROM: Init...
Ok
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000000 Mode: PLAIN
  VER: 0xFF BL: 0x03 [PRELOADER PORT]
  SOCID: 94F10279365A51D5115C24333AEBBC14065F71996E43F5E2B42F1E1AA9BE1E16
AGENT: AUTO: 0_base: base_v2316
  [ecb438fd] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA_v3.bin
  [b2f64140] C:\Users\Sebti ~ Gsm\Desktop\New folder (3)\D-TECH__D5-L__8.1.0\MT6739__D-TECH__D5-L__8.1.0__O11019__k39tv1_bsp\preloader_k39tv1_bsp.bin
Looking for suitable BootChain in DA...
Switch to v2216
Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA...
Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: PRELOADER
  EXT_RAM initialized
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed
Load HW info...
RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]
EMMC CID: 13014E51334A3936521005A5F076445D
EMMC crc Ok
  Ven: Micron OEM: 334 ID: 51334A393652 [Q3J96R] PRV: 0x10
  SNN: 94761078 [0x05A5F076]
  MM/YY: 4/2017
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3AB400000 [ 14.68 Gb ]

CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
  RNID: F13017A7DAD8698002D514C787A50D1B
USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]
HW verification...
Ok
Analyze PMT...
Ok
PMT: PGPT [0x64] Records: 34

Loaders Ok
Pre-Flash backup...
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6739__F13017A7DAD8698002D514C787A50D1B

Verify PMT...
Ok
Verify SEC DL...
Pre-Erase...
Erase: 0x0000000000000000 0x0000000002E88000
Error: 0xC0010002 ABORT
  Offset 0x0000 of 0x2E88000
Erase Break/Skip

RePartition...
RePartition Break/Skip

Flash write...
Write: PRELOADER [ 114.04 Kb ]
Error: 0xC0010001 ERROR
  Offset 0x0000 of 0x40000
Flashing fail
It seems as something is wrong with device.
- Check battery voltage and charge it
- Check is device hardware Ok
- Try again
Reset port...
Trying to reboot...
Reconnect Power/Cable now
بعد نزع الذاكرة تبين انها تالفة على Medusa Pro
PHP: 
Welcome to Medusa Pro Software version 2.2.5.1.
Activation type:
Used the activation PRO
Started.
Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Micron eMMC Q3J96R
Page size    : 512 B
Block size   : 512 B
Block count  : 30777344
Size         : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 13014E51334A3936521005A5F076445D
Manufacturer ID       : 0X13
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4E
Product name          : Q3J96R
Product revision      : 1.0
Product serial number : (hex) 5A5F076
Manufacturing date    : 04/2017
---------------------------------------------------------------
CSD Info

CSD                   : D07F01328F5913FFFFFFFFEF8640004F
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/Q3J96R_08_02_2024_14_31_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.5.1; FW: 1.26.
P00: GPT              (00000000, 00000040)    32 KB
P01: boot_para        (00000040, 00000800)    1024 KB
P02: recovery         (00000840, 0000C000)    24 MB
P03: para             (0000C840, 00000400)    512 KB
P04: expdb            (0000CC40, 0000A000)    20 MB
P05: frp              (00016C40, 00000800)    1024 KB
P06: nvcfg            (00017440, 00004000)    8 MB
P07: nvdata           (0001B440, 00010000)    32 MB
P08: metadata         (0002B440, 00010000)    32 MB
P09: protect1         (0003B440, 00004000)    8 MB
P10: protect2         (0003F440, 00004BC0)    9.469 MB
P11: seccfg           (00044000, 00004000)    8 MB
P12: sec1             (00048000, 00001000)    2048 KB
P13: proinfo          (00049000, 00001800)    3072 KB
P14: md1img           (0004A800, 00020000)    64 MB
P15: md1dsp           (0006A800, 00008000)    16 MB
P16: spmfw            (00072800, 00000800)    1024 KB
P17: mcupmfw          (00073000, 00000800)    1024 KB
P18: gz1              (00073800, 00008000)    16 MB
P19: gz2              (0007B800, 00008000)    16 MB
P20: nvram            (00083800, 00002800)    5 MB
P21: lk               (00086000, 00000800)    1024 KB
P22: lk2              (00086800, 00000800)    1024 KB
P23: loader_ext1      (00087000, 00000080)    64 KB
P24: loader_ext2      (00087080, 00000080)    64 KB
P25: boot             (00087100, 0000C000)    24 MB
P26: logo             (00093100, 00004000)    8 MB
P27: odmdtbo          (00097100, 00008000)    16 MB
P28: tee1             (0009F100, 00002800)    5 MB
P29: tee2             (000A1900, 00006700)    12.88 MB
P30: vendor           (000A8000, 00114000)    552 MB
P31: system           (001BC000, 00500000)    2560 MB
P32: cache            (006BC000, 000D8000)    432 MB
P33: userdata         (00794000, 015BDFDF)    10.87 GB
P34: flashinfo        (01D51FDF, 00008000)    16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/Q3J96R_nvdata_0x1b440_0x10000_08_02_2024_14_31_14.bin file...
Reading. Please wait...
ERROR[011]: Read error.
Attempting to read...
Disconnected.

يتبع...​
 
.:: Sebti _ Gsm ::.

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,672
مستوى التفاعل
2,946
النقاط
113
الإقامة
Ghardaïa
حسب ملف PRELOADER للهاتف تم التعرف على الذاكرة المتوافق معه

Medusa Pro
PHP: 
Found 3 eMMC supported CID:

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : QE63MB
eMMC CID         : 150100514536334D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : HAG4a2
eMMC CID         : 90014A484147346132

eMMC Vendor ID   : 13 (Micron eMMC)
eMMC Model ID    : 4E01
eMMC Name        : Q3J96R
eMMC CID         : 13014E51334A393652

الذاكرة المتوفرة Samsung eMMC QE63MB من هاتف Condor P6_PRO LTE _ PGN-528
على Medusa Pro نعمل Full Erasing ثم كتابة Firmware عبر Factory repair
odN2i2b.jpg
46kIoUc.jpeg


يتبع...​
 
.:: Sebti _ Gsm ::.

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,672
مستوى التفاعل
2,946
النقاط
113
الإقامة
Ghardaïa
بيانات العملية
PHP: 
Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC QE63MB
Page size    : 512 B
Block size   : 512 B
Block count  : 30535680
Size         : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
---------------------------------------------------------------
Searching Android build info...
Ok

Disk/Image size     : a3e00000 bytes
Device sector size    : 512 bytes
Partition offset      : 360448
Number of sectors     : 7602176
Device Manufacturer   : SPA Condor Electronics
Device Platform       : mt6737t
Build ID              : NRD90M
Display Build ID      : PGN528
Release ID            : 7.0
Device Model          : PGN528
Device Name           : PGN528
Architecture ABI      : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description     : full_gnsz6737t_66_n-user 7.0 NRD90M 1533873701 release-keys

---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 0.
Erasing. Please wait... Done.
SW: 2.2.5.1; FW: 1.26.
Erasing. Please wait...
Switched to boot area partition 1.
Done.
SW: 2.2.5.1; FW: 1.26.
Erasing. Please wait...
Switched to boot area partition 2.
Done.
SW: 2.2.5.1; FW: 1.26.
---------------------------------------------------------------
Selected scatter file: C:/Users/Sebti ~ Gsm/Desktop/New folder (3)/D-TECH__D5-L__8.1.0/MT6739__D-TECH__D5-L__8.1.0__O11019__k39tv1_bsp/MT6739_Android_scatter.txt.
Scatter file type 2.
Opened input file: C:/Users/Sebti ~ Gsm/Desktop/New folder (3)/D-TECH__D5-L__8.1.0/MT6739__D-TECH__D5-L__8.1.0__O11019__k39tv1_bsp/preloader_k39tv1_bsp.bin

Found 3 eMMC supported CID:

eMMC Vendor ID   : 15 (Samsung eMMC)
eMMC Model ID    : 0001
eMMC Name        : QE63MB
eMMC CID         : 150100514536334D42

eMMC Vendor ID   : 90 (Hynix eMMC)
eMMC Model ID    : 4A01
eMMC Name        : HAG4a2
eMMC CID         : 90014A484147346132

eMMC Vendor ID   : 13 (Micron eMMC)
eMMC Model ID    : 4E01
eMMC Name        : Q3J96R
eMMC CID         : 13014E51334A393652

Writing. Please wait...

Switched to user area.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.

Switched to boot area partition 1.
Writing partition preloader...  
Write data verification is enabled.
Done.

Switched to user area.
Writing partition recovery...    Done.
Writing partition proinfo...    Done.
Writing partition md1img...    Done.
Writing partition md1dsp...    Done.
Writing partition spmfw...    Done.
Writing partition mcupmfw...    Done.
Writing partition nvram...    Done.
Writing partition lk...    Done.
Writing partition lk2...    Done.
Writing partition loader_ext1...    Done.
Writing partition loader_ext2...    Done.
Writing partition boot...    Done.
Writing partition logo...    Done.
Writing partition odmdtbo...    Done.
Writing partition tee1...    Done.
Writing partition tee2...    Done.
Writing checksums...Done.
Writing finished.
SW: 2.2.5.1; FW: 1.26.
Disconnected.


---------------------------------------------------------------
Model Settings:
Interface : eMMC
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Samsung eMMC QE63MB
Page size    : 512 B
Block size   : 512 B
Block count  : 30535680
Size         : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 150100514536334D4203D5749A64251D
Manufacturer ID       : 0X15
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X00
Product name          : QE63MB
Full name one from    : KMQE60013M-B318
Product revision      : 0.3
Product serial number : (hex) D5749A64
Manufacturing date    : 02/2018
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFF6DBFFEF8E40400D
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.8 (for MMC v5.1)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_08_02_2024_16_16_43.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.5.1; FW: 1.26.
P00: GPT              (00000000, 00000040)    32 KB
P01: boot_para        (00000040, 00000800)    1024 KB
P02: recovery         (00000840, 0000C000)    24 MB
P03: para             (0000C840, 00000400)    512 KB
P04: expdb            (0000CC40, 0000A000)    20 MB
P05: frp              (00016C40, 00000800)    1024 KB
P06: nvcfg            (00017440, 00004000)    8 MB
P07: nvdata           (0001B440, 00010000)    32 MB
P08: metadata         (0002B440, 00010000)    32 MB
P09: protect1         (0003B440, 00004000)    8 MB
P10: protect2         (0003F440, 00004BC0)    9.469 MB
P11: seccfg           (00044000, 00004000)    8 MB
P12: sec1             (00048000, 00001000)    2048 KB
P13: proinfo          (00049000, 00001800)    3072 KB
P14: md1img           (0004A800, 00020000)    64 MB
P15: md1dsp           (0006A800, 00008000)    16 MB
P16: spmfw            (00072800, 00000800)    1024 KB
P17: mcupmfw          (00073000, 00000800)    1024 KB
P18: gz1              (00073800, 00008000)    16 MB
P19: gz2              (0007B800, 00008000)    16 MB
P20: nvram            (00083800, 00002800)    5 MB
P21: lk               (00086000, 00000800)    1024 KB
P22: lk2              (00086800, 00000800)    1024 KB
P23: loader_ext1      (00087000, 00000080)    64 KB
P24: loader_ext2      (00087080, 00000080)    64 KB
P25: boot             (00087100, 0000C000)    24 MB
P26: logo             (00093100, 00004000)    8 MB
P27: odmdtbo          (00097100, 00008000)    16 MB
P28: tee1             (0009F100, 00002800)    5 MB
P29: tee2             (000A1900, 00006700)    12.88 MB
P30: vendor           (000A8000, 00114000)    552 MB
P31: system           (001BC000, 00500000)    2560 MB
P32: cache            (006BC000, 000D8000)    432 MB
P33: userdata         (00794000, 01582FDF)    10.76 GB
P34: flashinfo        (01D16FDF, 00008000)    16 MB

---------------------------------------------------------------
Searching Android build info...
Not found
---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 0.

يتبع...​
 
.:: Sebti _ Gsm ::.

.:: Sebti _ Gsm ::.

:: مراقب قسم بوكسات الجيتاق JTAG ::
إنضم
30 ديسمبر 2015
المشاركات
1,672
مستوى التفاعل
2,946
النقاط
113
الإقامة
Ghardaïa
بعد برمجة الذاكرة ثم تركيبها على بطاقة الام. نمرر Firmware على CM2MT2
كود: 
Operation: Write Flash [ v2.51b1 (beta) ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[+] Pre-Erase
[+] Check compatibility
[+] Backup
[-] FLASH ERASE

Files: 19
[FL]: C:\Users\Sebti ~ Gsm\Desktop\New folder (3)\D-TECH__D5-L__8.1.0\MT6739__D-TECH__D5-L__8.1.0__O11019__k39tv1_bsp\
  preloader_k39tv1_bsp.bin [ 114.04 Kb ] b2f64140
  recovery.img [ 11.69 Mb ]
  md1rom.img [ 20.03 Mb ]
  md1dsp.img [ 6.09 Mb ] 3d6fb81a
  spmfw.img [ 24.19 Kb ] aff1de55
  mcupmfw.img [ 3.36 Kb ] 154618d0
  lk.bin [ 485.69 Kb ] 7d2285b5
  lk.bin [ 485.69 Kb ] 7d2285b5
  loader_ext.img [ 45.64 Kb ] b185b8dc
  loader_ext.img [ 45.64 Kb ] b185b8dc
  boot.img [ 7.75 Mb ] 258c7743
  logo.bin [ 1.23 Mb ] 607890d3
  odmdtbo.img [ 34.53 Kb ] fbcf53ae
  tz.img [ 943.72 Kb ] d79aad45
  tz.img [ 943.72 Kb ] d79aad45
  vendor.img [ 196.31 Mb ]
  system.img [ 1.39 Gb ]
  cache.img [ 8.63 Mb ]
  userdata.img [ 50.99 Mb ]
Total size: 0x6C0B7E40 [ 1.69 Gb ]
Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 1543221416
Product Model  : D5-L
Product Brand  : D-TECH
Product Name   : D5-L
Product Device : D5-L
Product Manfct : D-TECH
Product Info   : k39tv1_bsp
Product Board  : k39tv1_bsp
Board Platform : mt6739
Firmware ID: MT6739_D-TECH_D5-L_OSv8.1.0_O11019_k39tv1_bsp
Verify firmware [MT6739_D-TECH_D5-L_OSv8.1.0_O11019_k39tv1_bsp]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020
Upload file to server? No

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM38)
MODE [0]: PRELOADER PORT; PORT: 38
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
BROM: Sec Level: 0x00000000 Mode: PLAIN
  VER: 0xFF BL: 0x03 [PRELOADER PORT]
  SOCID: 94F10279365A51D5115C24333AEBBC14065F71996E43F5E2B42F1E1AA9BE1E16
AGENT: AUTO: 0_base: base_v2316
  [ecb438fd] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA_v3.bin
  [b2f64140] C:\Users\Sebti ~ Gsm\Desktop\New folder (3)\D-TECH__D5-L__8.1.0\MT6739__D-TECH__D5-L__8.1.0__O11019__k39tv1_bsp\preloader_k39tv1_bsp.bin
Looking for suitable BootChain in DA...
Switch to v2216
Found MT6739
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
  MODE: PRELOADER
  EXT_RAM initialized
DA: Boot to 2nd DA...
  2nd stage confirmed
DA: SYNC passed

Load HW info...
RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x80000000 [ 2.00 Gb ]

EMMC CID: 150100514536334D4203D5749A64251D EMMC crc Ok
  Ven: Samsung OEM: 256 ID: 514536334D42 [QE63MB] PRV: 0x03
  SNN: 3581188708 [0xD5749A64]
  MM/YY: 2/2018
  BOOT1: 0x00400000 [ 4.00 Mb ]
  BOOT2: 0x00400000 [ 4.00 Mb ]
  RPMB: 0x00400000 [ 4.00 Mb ]
  USER: 0x3A3E00000 [ 14.56 Gb ]

CHIP: MT6739 SBID: 0x8A00 HWVR: 0xCB00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0699
  CODE: Zion
  TYPE: MODERN  [RAPHAEL]
  RNID: F13017A7DAD8698002D514C787A50D1B

USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

HW verification... Ok

Analyze PMT... Ok
PMT: PGPT [0x64] Records: 34

Verify config values...
Ok
Loaders Ok
Pre-Flash backup...
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6739__F13017A7DAD8698002D514C787A50D1B

Verify PMT... Ok
Verify SEC DL...
Pre-Erase...
Erase: 0x0000000000000000 0x0000000002E88000
Erase: 0x0000000003688000 0x0000000004000000
Erase: 0x0000000008800000 0x0000000000A00000
Erase: 0x0000000009500000 0x0000000007200000
Erase: 0x0000000010C00000 0x0000000000200000
Erase: 0x0000000010E20000 0x00000001A19E0000

RePartition... Ok
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 34

Flash write...
Write: PRELOADER [ 114.04 Kb ]
Update bootloader backup copy [preloader_backup]... Ok
Write: RECOVERY [ 11.69 Mb ] Ok
Write: MD1IMG [ 20.03 Mb ] Ok
Write: MD1DSP [ 6.09 Mb ] Ok
Write: SPMFW [ 24.19 Kb ] Ok
Write: MCUPMFW [ 3.36 Kb ] Ok
Write: LK [ 485.69 Kb ] Ok
Write: LK2 [ 485.69 Kb ] Ok
Write: LOADER_EXT1 [ 45.64 Kb ] Ok
Write: LOADER_EXT2 [ 45.64 Kb ] Ok
Write: BOOT [ 7.75 Mb ] Ok
Write: LOGO [ 1.23 Mb ] Ok
Write: ODMDTBO [ 34.53 Kb ] Ok
Write: TEE1 [ 943.72 Kb ] Ok
Write: TEE2 [ 943.72 Kb ] Ok
Write: VENDOR [ 196.31 Mb ] Ok
Write: SYSTEM [ 1.39 Gb ] Ok
Write: CACHE [ 8.63 Mb ] Ok
Write: USERDATA [ 50.99 Mb ] Ok
RePartition... Ok

Reset port...
Done: 00:01:12
Reconnect Power/Cable now



Restore backup Original
*************************************************************************
USB: HIGH-SPEED
Boot done MODERN  [RAPHAEL]

Analyze PMT... Ok
PMT: PGPT [0x64] Records: 34
Search for MT6739__F13017A7DAD8698002D514C787A50D1B
Backup for connected device Found
Restore it? No
Original backup Rejected
Backup from other unit may DAMAGE your device!
Continue with foreign backup? Yes

C:\InfinityBox\CM2MT2\Backup\MT6739__F13017A7DAD8698002D514C787A50D1B.7z
tag: d-tech-d5-l-k39tv1-bsp
sw: mt6739_d-tech_d5-l_osv8.1.0_o11019_k39tv1_bsp
flash: emmc
cid: 13014E51334A39365210
cpu: hw_code: 0699 hw_sc: 8A00 hw_ver: CB00 sw_ver: 0000 evo: 0000 hw: 6739
Backup selected: C:\InfinityBox\CM2MT2\Backup\MT6739__F13017A7DAD8698002D514C787A50D1B.7z
Restore...
Selected [nvcfg;nvdata;nvram;proinfo;protect1;]
Skip: lk
Restore: nvcfg Ok
Restore: nvdata Ok
Restore: nvram Ok
Skip: pgpt
Skip: preloader
Restore: proinfo Ok
Restore: protect1 Ok
Reset port...
Done: 00:01:48
Reconnect Power/Cable now

بالتوفيـــــــق للجميـــــــع

5vkXjC2.png
 
يجب تسجيل الدخول أو التسجيل كي تتمكن من الرد هنا.
أعلى