حصريا دعم ربير بوت OPPO A5
ملاحظة مهمة : هناك خطا شائع عند توصيل EMMC لتتم قراءة صحيحة
يتم الاستغناء على 2.8V ...والاعتمادفقط على 1.8V وتوصيل USB
كود:Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 2.8V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Hynix eMMC HAG4a2 Core : Page size : 512 B Block size : 512 B Block count : 30777344 Size : 14.68 GB (15028.00 MB) --------------------------------------------------------------- CID Info CID : 90014A484147346132A5C0D7B2E1C535 Manufacturer ID : 0X90 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4A Product name : HAG4a2 Product revision : 10.5 Product serial number : (hex) C0D7B2E1 Manufacturing date : 12/2018 --------------------------------------------------------------- CSD Info CSD : D02701328F5903FFFFFFFFE78A400017 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.8 (for MMC v5.1) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x38) 00111000 Boot partition enable : User area (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7692288 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_24_10_2020_12_41_47.bin. Connect successful.
ملف SRF +Emmc pinout
كود:Partition table has been found on device. Switched to boot area partition 1. Added partition BOOT1 to constructor file. Switched to boot area partition 2. Added partition BOOT2 to constructor file. Switched to user area. Added partition GPT to constructor file. Added partition oppodycnvbk to constructor file. Added partition oppostanvbk to constructor file. Added partition modemst1 to constructor file. Added partition modemst2 to constructor file. Added partition persist to constructor file. Added partition opporeserve1 to constructor file. Added partition opporeserve2 to constructor file. Added partition fsc to constructor file. Added partition ssd to constructor file. Added partition sbl1 to constructor file. Added partition rpm to constructor file. Added partition tz to constructor file. Added partition devcfg to constructor file. Added partition sbl1bak to constructor file. Added partition rpmbak to constructor file. Added partition tzbak to constructor file. Added partition devcfgbak to constructor file. Added partition dsp to constructor file. Added partition DDR to constructor file. Added partition fsg to constructor file. Added partition sec to constructor file. Added partition aboot to constructor file. Added partition abootbak to constructor file. Added partition modem to constructor file. Added partition dtbo to constructor file. Added partition vbmeta to constructor file. Added partition boot to constructor file. Added partition recovery to constructor file. Added partition devinfo to constructor file. Added partition splash to constructor file. Added partition LOGO to constructor file. Added partition DRIVER to constructor file. Added partition cache to constructor file. Added partition misc to constructor file. Added partition keystore to constructor file. Added partition config to constructor file. Added partition log to constructor file. Added partition oem to constructor file. Added partition limits to constructor file. Added partition mota to constructor file. Added partition dip to constructor file. Added partition mdtp to constructor file. Added partition syscfg to constructor file. Added partition mcfg to constructor file. Added partition lksecapp to constructor file. Added partition cmnlib to constructor file. Added partition cmnlib64 to constructor file. Added partition keymaster to constructor file. Added partition lksecappbak to constructor file. Added partition cmnlibbak to constructor file. Added partition cmnlib64bak to constructor file. Added partition keymasterbak to constructor file. Added partition apdp to constructor file. Added partition msadp to constructor file. Added partition dpo to constructor file. Added partition logdump to constructor file. Added partition vm-kystore to constructor file. Added partition vm-data to constructor file. Added partition hyp to constructor file. Added partition vm-system to constructor file. Added partition vm-linux to constructor file. SRF "C:/Users/m/Desktop/Oppo_A5 BY DAHMANI MED.srf" has been installed successfully
كود:---------------------------------------------------------------Repairing from file "C:/Users/m/Desktop/Oppo_A5 BY DAHMANI MED.srf". Write data verification is enabled. Switched to boot area partition 1. Writing BOOT1 partition... Done. Switched to boot area partition 2. Writing BOOT2 partition... Done. Switched to user area. Writing GPT partition... Done. Writing oppodycnvbk partition... Done. Writing oppostanvbk partition... Done. Writing modemst1 partition... Done. Writing modemst2 partition... Done. Writing persist partition... Done. Writing opporeserve1 partition... Done. Writing opporeserve2 partition... Done. Writing fsc partition... Done. Writing ssd partition... Done. Writing sbl1 partition... Done. Writing rpm partition... Done. Writing tz partition... Done. Writing devcfg partition... Done. Writing sbl1bak partition... Done. Writing rpmbak partition... Done. Writing tzbak partition... Done. Writing devcfgbak partition... Done. Writing dsp partition... Done. Writing DDR partition... Done. Writing fsg partition... Done. Writing sec partition... Done. Writing aboot partition... Done. Writing abootbak partition... Done. Writing modem partition... Done. Writing dtbo partition... Done. Writing vbmeta partition... Done. Writing boot partition... Done. Writing recovery partition... Done. Writing devinfo partition... Done. Writing splash partition... Done. Writing LOGO partition... Done. Writing DRIVER partition... Done. Writing cache partition... Done. Writing misc partition... Done. Writing keystore partition... Done. Writing config partition... Done. Writing log partition... Done. Writing oem partition... Done. Writing limits partition... Done. Writing mota partition... Done. Writing dip partition... Done. Writing mdtp partition... Done. Writing syscfg partition... Done. Writing mcfg partition... Done. Writing lksecapp partition... Done. Writing cmnlib partition... Done. Writing cmnlib64 partition... Done. Writing keymaster partition... Done. Writing lksecappbak partition... Done. Writing cmnlibbak partition... Done. Writing cmnlib64bak partition... Done. Writing keymasterbak partition... Done. Writing apdp partition... Done. Writing msadp partition... Done. Writing dpo partition... Done. Writing logdump partition... Done. Writing vm-kystore partition... Done. Writing vm-data partition... Done. Writing hyp partition... Done. Writing vm-system partition... Done. Writing vm-linux partition... Done. Smart Repair is successfully complete. SW: 2.1.4; FW: 1.24. [COLOR="#008000"]Disconnected. [/COLOR][/B]
قراءة دامب READ DUMP
كود:CID Info CID : 90014A484147346132A5C0D7B2E1C535 Manufacturer ID : 0X90 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X4A Product name : HAG4a2 Product revision : 10.5 Product serial number : (hex) C0D7B2E1 Manufacturing date : 12/2018 --------------------------------------------------------------- CSD Info CSD : D02701328F5903FFFFFFFFE78A400017 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.8 (for MMC v5.1) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x38) 00111000 Boot partition enable : User area (Bus width = 1Bit) Boot ACK : No boot acknowledge sent (default) Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 7692288 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/HAG4a2_24_10_2020_13_17_56.bin. Connect successful. --------------------------------------------------------------- SW: 2.1.4; FW: 1.24. P00: GPT (00000000, 00000028) 20 KB P01: oppodycnvbk (00000028, 00005000) 10 MB P02: oppostanvbk (00005028, 00005000) 10 MB P03: modemst1 (0000A028, 00000C00) 1536 KB P04: modemst2 (0000AC28, 00000C00) 1536 KB P05: persist (0000B828, 00010000) 32 MB P06: opporeserve1 (0001B828, 00004000) 8 MB P07: opporeserve2 (0001F828, 00020000) 64 MB P08: fsc (0003F828, 00000002) 1024 b P09: ssd (0003F830, 00000010) 8 KB P10: sbl1 (0003F840, 00000400) 512 KB P11: rpm (0003FC40, 00000400) 512 KB P12: tz (00040040, 00001000) 2048 KB P13: devcfg (00041040, 00000200) 256 KB P14: sbl1bak (00041240, 00000400) 512 KB P15: rpmbak (00041640, 00000400) 512 KB P16: tzbak (00041A40, 00001000) 2048 KB P17: devcfgbak (00042A40, 00000200) 256 KB P18: dsp (00042C40, 00008000) 16 MB P19: DDR (0004C000, 00000040) 32 KB P20: fsg (0004C040, 00002000) 4 MB P21: sec (0004E040, 00000020) 16 KB P22: aboot (0004E060, 00000800) 1024 KB P23: abootbak (0004E860, 00000800) 1024 KB P24: modem (0004F060, 00040000) 128 MB P25: dtbo (0008F060, 00004000) 8 MB P26: vbmeta (00093060, 00000080) 64 KB P27: boot (000930E0, 00020000) 64 MB P28: recovery (000B30E0, 00020000) 64 MB P29: devinfo (000D30E0, 00000800) 1024 KB P30: splash (000D4000, 00005800) 11 MB P31: LOGO (000D9800, 00010000) 32 MB P32: DRIVER (000E9800, 00010000) 32 MB P33: cache (000F9800, 00080000) 256 MB P34: misc (00179800, 00000800) 1024 KB P35: keystore (0017A000, 00000400) 512 KB P36: config (0017A400, 00000040) 32 KB P37: log (0017A440, 00020000) 64 MB P38: oem (0019A440, 00000800) 1024 KB P39: limits (0019C000, 00000040) 32 KB P40: mota (001A0000, 00000400) 512 KB P41: dip (001A0400, 00000800) 1024 KB P42: mdtp (001A0C00, 00010000) 32 MB P43: syscfg (001B0C00, 00000400) 512 KB P44: mcfg (001B1000, 00002000) 4 MB P45: lksecapp (001B4000, 00000100) 128 KB P46: cmnlib (001B4100, 00000800) 1024 KB P47: cmnlib64 (001B4900, 00000800) 1024 KB P48: keymaster (001B5100, 00000800) 1024 KB P49: lksecappbak (001B5900, 00000100) 128 KB P50: cmnlibbak (001B5A00, 00000800) 1024 KB P51: cmnlib64bak (001B6200, 00000800) 1024 KB P52: keymasterbak (001B6A00, 00000800) 1024 KB P53: apdp (001B8000, 00000200) 256 KB P54: msadp (001B8200, 00000200) 256 KB P55: dpo (001B8400, 00000010) 8 KB P56: logdump (001B8410, 00020000) 64 MB P57: vm-kystore (001D8410, 00000800) 1024 KB P58: vm-data (001D8C10, 00005000) 10 MB P59: hyp (001E0000, 00004000) 8 MB P60: vm-system (001E4000, 00020000) 64 MB P61: vm-linux (00204000, 00010000) 32 MB P62: system (00214000, 006B4800) 3433 MB P63: vendor (008C8800, 0020FB00) 1055 MB P64: userdata (00ADC000, 0127DFDF) 9.246 GB Backuping modemst1 partition... Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst1_0xa028_0xc00_24_10_2020_13_17_56.bin file... Reading. Please wait... Done. Elapsed time 00:00:00 SW: 2.1.4; FW: 1.24. Backuping modemst2 partition... Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_modemst2_0xac28_0xc00_24_10_2020_13_17_56.bin file... Reading. Please wait... Done. Elapsed time 00:00:00 SW: 2.1.4; FW: 1.24. Backuping fsg partition... Opening C:/Program Files/Medusa Pro Software/Backups/HAG4a2_fsg_0x4c040_0x2000_24_10_2020_13_17_56.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 SW: 2.1.4; FW: 1.24. ---------------------------------------------------------------Searching Android build info... Ok Disk/Image size : ab400000 bytes Device sector size : 512 bytes Partition offset : 2179072 Number of sectors : 7030784 Build ID : OPM1.171019.026 Release ID : 8.1.0 Architecture ABI : arm64-v8a Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi Build Description : S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys ---------------------------------------------------------------Please select file. Switched to boot area partition 1. Opening C:/Users/m/Desktop/OPPO A5/Hynix eMMC HAG4a2_24_10_2020_13_18_58.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 SW: 2.1.4; FW: 1.24. Switched to boot area partition 2. Opening C:/Users/m/Desktop/OPPO A5/Hynix eMMC HAG4a2_24_10_2020_13_19_13.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 SW: 2.1.4; FW: 1.24. EXT_CSD saved to file C:/Users/m/Desktop/OPPO A5/EXT_CSD_24_10_2020_13_19_22.bin. Switched to user area. Opening E:/Hynix eMMC HAG4a2_24_10_2020_13_19_39.bin file... Reading. Please wait...
الملفات ستكون على سيرفر OCTOPLUS /MEDUSA PRO
والله ولي التوفيق