h811 repair boot
Welcome to Medusa Pro Software version 1.3.4.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Reader #3: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Brand : LG
Model : H811
SRF : C:/Program Files/Medusa Pro Software/firmwareFolder/LG_H811_EMMC.srf
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 032G74
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB
---------------------------------------------------------------
CID Info
CID : 110100303332473734007B41C1965215
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 032G74
Product revision : 0.0
Product serial number : (hex) 7B41C196
Manufacturing date : 05/2015
---------------------------------------------------------------
CSD Info
CSD : D02700320F5903FFFFFFFFE78640009B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 00000000
Boot partition enable : Device not boot enabled (default) (Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15269888 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/032G74_07_04_2017_15_21_00.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00008000)
P01: modem (00008000, 0002B000)
P02: pmic (00038000, 00000400)
P03: sbl1 (00038400, 00000800)
P04: tz (00038C00, 00000800)
P05: sdi (00039400, 00000400)
P06: hyp (00039800, 00000400)
P07: rpm (00039C00, 00000400)
P08: aboot (0003A000, 00001000)
P09: sbl1bak (0003B000, 00000800)
P10: pmicbak (0003B800, 00000400)
P11: tzbak (0003BC00, 00000800)
P12: hypbak (0003C400, 00000400)
P13: rpmbak (0003C800, 00000400)
P14: abootbak (0003CC00, 00001000)
P15: sdibak (0003DC00, 00000400)
P16: limits (0003E000, 00000400)
P17: devinfo (0003E400, 00000400)
P18: apdp (0003E800, 00000400)
P19: msadp (0003EC00, 00000400)
P20: dpo (0003F000, 00000400)
P21: spare1 (0003F400, 00000C00)
P22: misc (00040000, 00008000)
P23: persist (00048000, 00010000)
P24: modemst1 (00058000, 00000C00)
P25: modemst2 (00058C00, 00000C00)
P26: fsg (00059800, 00000C00)
P27: fsc (0005A400, 00000400)
P28: ssd (0005A800, 00000400)
P29: keystore (0005AC00, 00000400)
P30: DDR (0005B000, 00001000)
P31: sec (0005C000, 00000400)
P32: encrypt (0005C400, 00000400)
P33: eksst (0005C800, 00000400)
P34: rct (0005CC00, 00000400)
P35: persistent (0005D000, 00001000)
P36: spare2 (0005E000, 00002000)
P37: laf (00060000, 00018000)
P38: boot (00078000, 00014000)
P39: recovery (0008C000, 00014000)
P40: drm (000A0000, 00004000)
P41: sns (000A4000, 00004000)
P42: mpt (000A8000, 00010000)
P43: eri (000B8000, 00004000)
P44: raw_resources (000BC000, 00002000)
P45: raw_resourcesbak (000BE000, 00002000)
P46: operatorlogging (000C0000, 00008000)
P47: carrier (000C8000, 00014000)
P48: felica (000DC000, 00004000)
P49: factory (000E0000, 00017000)
P50: spare3 (000F7000, 00001000)
P51: fota (000F8000, 00005000)
P52: spare4 (000FD000, 00003000)
P53: system (00100000, 0085E000)
P54: cache (0095E000, 00268000)
P55: userdata (00BC6000, 02E72000)
P56: grow (03A38000, 00005FDF)
Opening D:/flash/Phones/a.lg/T-Mobile H811_10N.kdz file...
Write data verification is enabled.
Writing. Please wait...
Writing partition PrimaryGPT... Done.
Writing partition modem... Done.
Writing partition pmic... Done.
Writing partition sbl1... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Writing partition hyp... Done.
Writing partition rpm... Done.
Writing partition aboot... Done.
Writing partition sbl1bak... Done.
Writing partition pmicbak... Done.
Writing partition tzbak... Done.
Writing partition hypbak... Done.
Writing partition rpmbak... Done.
Writing partition abootbak... Done.
Writing partition sdibak... Done.
Writing partition persist... Done.
Writing partition sec... Done.
Writing partition rct... Done.
Writing partition laf... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Writing partition raw_resources... Done.
Writing partition raw_resourcesbak... Done.
Writing partition factory... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition system... Done.
Writing partition BackupGPT... Done.
Writing is finished.
SW: 1.3.4; FW: 1.16.
Disconnected.