تم بعون الله. استعادة البيانات من ذاكرة هاتف Condor A8 "الصور...الرسائل...الارقام"
البطاقة الام لا تصلح. بسبب الماء "ايسي الباور... اييسي الشحن... لاتراب الشاشة .....لاتصلح"
بعد نزع الذاكرة eMMC من البطاقة الام... تبين انه سليم
نسحب الـ Full dump لان البيانات مشفرة Encrypted Data
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 4 bits
Bus speed : 20 MHz
Connecting...
Device : Samsung eMMC RX1BMB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100525831424D420714CACC19C365
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RX1BMB
Product revision : 0.7
Product serial number : (hex) 14CACC19
Manufacturing date : 12/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file F:/Medusa Pro Software/EXT_CSD Backups/RX1BMB_19_01_2021_14_05_17.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: lk (0000E400, 00000400) 512 KB
P06: para (0000E800, 00000400) 512 KB
P07: boot (0000EC00, 00008000) 16 MB
P08: recovery (00016C00, 00008000) 16 MB
P09: logo (0001EC00, 00004000) 8 MB
P10: expdb (00022C00, 00005000) 10 MB
P11: seccfg (00027C00, 00000400) 512 KB
P12: oemkeystore (00028000, 00001000) 2048 KB
P13: secro (00029000, 00003000) 6 MB
P14: keystore (0002C000, 00004000) 8 MB
P15: tee1 (00030000, 00002800) 5 MB
P16: tee2 (00032800, 00002800) 5 MB
P17: frp (00035000, 00000800) 1024 KB
P18: nvdata (00035800, 00010000) 32 MB
P19: metadata (00045800, 00012800) 37 MB
P20: system (00058000, 00780000) 3840 MB
P21: cache (007D8000, 000C8000) 400 MB
P22: userdata (008A0000, 03195C00) 24.79 GB
P23: flashinfo (03A35C00, 00008000) 16 MB
Backuping nvdata partition...
Opening F:/Medusa Pro Software/Backups/RX1BMB_nvdata_0x35800_0x10000_19_01_2021_14_05_17.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.1.8; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 360448
Number of sectors : 7864320
Device Manufacturer : condor
Device Platform : mt6753
Build ID : MRA58K
Display Build ID : PGN611
Release ID : 6.0
Device Model : PGN611
Device Name : PGN611
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : full_gionee6753_65u_m0-user 6.0 MRA58K 1470909746 release-keys
---------------------------------------------------------------
Opening F:/Medusa Pro Software/Nouveau dossier/Condor A8/[COLOR="#0000FF"]Samsung eMMC RX1BMB_19_01_2021_14_05_28.bin[/COLOR] file...
[COLOR="#008000"]Reading[/COLOR]. [COLOR="#FF0000"]Please wait...[/COLOR] [COLOR="#008000"]Done[/COLOR].
Elapsed time 01:33:39
SW: 2.1.8; FW: 1.24.
Canceling process...[/SIZE][/B][/LEFT]
بعدها نحضر هاتف اخر Condor A8 سليم
نمرر الـ Full dump للهاتف من خلال الـ USB فقط
كود:
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Generic EMV Smartcard Reader 0
Please, power phone OFF (press and hold "Vol+" or "Vol-" button) and connect USB cable.
Connecting...
Detecting Chip Version...
HW Chip : MT6753
HW Version : 8A00.CA00.0000.0000
Brom Version: FF
Boot Loader Version: 01
Sending Download Agent...
DA successfully sent
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: 15010052.5831424D.420714D6.CC491285
eMMC Flash: Samsung: RX1BMB
DA ver : 4.2.93
Initializing Memory Flash...
Initialization completed
Sending Loader...
Loader successfully sent
Reading Flash Info...
EMMC rpmb size : 4 Mb
EMMC boot1 size : 4 Mb
EMMC boot2 size : 4 Mb
EMMC gp1 size : 0 Mb
EMMC gp2 size : 0 Mb
EMMC gp3 size : 0 Mb
EMMC gp4 size : 0 Mb
EMMC user area size : 29820 Mb
Internal RAM size : 128 Kb
External RAM size : 3072 Mb
Device :
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: lk (0000E400, 00000400) 512 KB
P06: para (0000E800, 00000400) 512 KB
P07: boot (0000EC00, 00008000) 16 MB
P08: recovery (00016C00, 00008000) 16 MB
P09: logo (0001EC00, 00004000) 8 MB
P10: expdb (00022C00, 00005000) 10 MB
P11: seccfg (00027C00, 00000400) 512 KB
P12: oemkeystore (00028000, 00001000) 2048 KB
P13: secro (00029000, 00003000) 6 MB
P14: keystore (0002C000, 00004000) 8 MB
P15: tee1 (00030000, 00002800) 5 MB
P16: tee2 (00032800, 00002800) 5 MB
P17: frp (00035000, 00000800) 1024 KB
P18: nvdata (00035800, 00010000) 32 MB
P19: metadata (00045800, 00012800) 37 MB
P20: system (00058000, 00780000) 3840 MB
P21: cache (007D8000, 000C8000) 400 MB
P22: userdata (008A0000, 03195C00) 24.79 GB
P23: flashinfo (03A35C00, 00008000) 16 MB
Backuping nvdata partition...
Opening F:/Medusa Pro Software/Backups/_nvdata_0x35800_0x10000_19_01_2021_15_49_31.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:05
SW: 2.1.8; FW: 1.24.
The same area.
Opening F:/Medusa Pro Software/Nouveau dossier/Condor A8/[COLOR="#0000FF"]Samsung eMMC RX1BMB_19_01_2021_14_05_28.bin[/COLOR] file...
Write data verification is enabled.
[COLOR="#008000"]Writing[/COLOR]. [COLOR="#FF0000"]Please wait...[/COLOR] [COLOR="#008000"]Done[/COLOR].
SW: 2.1.8; FW: 1.24.[/SIZE][/B][/LEFT]
بعدها نشغل الهاتف... نجده مقفل... نستعمل برنامج R3 MTK
الموضوع لصديقي .:: Mohamed Gsm ::. جزاه الله خيرا
فك قفل شاشة Condor A8 PGN611 بدون فقدان ملفات الهاتف على R3 MTK
هذا الموضوع للفائدة فقط. أرجو أن لا يستخدمه أحد لأغراض خبيثة
تم بعون الله