Octoplus Box JTAG Software v1.7.9 Medusa Box v2.4.5
Octoplus Box JTAG Software v1.7.9
Medusa Box v2.4.5
Added support for the following models:
- LG D280N - added Dead Boot Repair via USB
- LG D280G - added Dead Boot Repair via USB
- LG D285 - added Dead Boot/Device Repair via USB
- LG D285F - added Dead Boot Repair via USB
- LG D285G - added Dead Boot Repair via USB
- LG D315 - added Dead Boot Repair via USB
- LG D315K - added Dead Boot/Device Repair
Added new Core ID (107180E1) for Qualcomm APQ8064
All pinouts and Repair procedures are described in the manual "Help" button in Software
To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Download Octoplus Box JTAG Software v1.7.9
Download Medusa Box v2.4.5
Octoplus Box JTAG Software v1.7.9
Medusa Box v2.4.5
Added support for the following models:
- LG D280N - added Dead Boot Repair via USB
- LG D280G - added Dead Boot Repair via USB
- LG D285 - added Dead Boot/Device Repair via USB
- LG D285F - added Dead Boot Repair via USB
- LG D285G - added Dead Boot Repair via USB
- LG D315 - added Dead Boot Repair via USB
- LG D315K - added Dead Boot/Device Repair
Added new Core ID (107180E1) for Qualcomm APQ8064
All pinouts and Repair procedures are described in the manual "Help" button in Software
To repair mentioned above devices via USB, please follow the next three steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Download Octoplus Box JTAG Software v1.7.9
Download Medusa Box v2.4.5