رد: تجارب الأعضاء الناجحة في تصليح الـBOOT لبوكس Medusa و Octoplus
انشاء ملف SRF لـ TAB CONDOR ( TGW-801G )
انشاء ملف SRF لـ TAB CONDOR ( TGW-801G )
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G1e
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A4838473165050829F39C9013F3
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G1e
Product revision : 0.8
Product serial number : (hex) 29F39C90
Manufacturing date : 01/2016
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFEF8A4040D3
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/H8G1e_06_12_2021_12_46_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: misc2 (00001C00, 00004000) 8 MB
P03: ftm (00005C00, 00004000) 8 MB
P04: nvram (00009C00, 00002800) 5 MB
P05: protect1 (0000C400, 00005000) 10 MB
P06: protect2 (00011400, 00005000) 10 MB
P07: lk (00016400, 00001000) 2048 KB
P08: lkbak (00017400, 00001000) 2048 KB
P09: laf (00018400, 0000E000) 28 MB
P10: para (00026400, 00000400) 512 KB
P11: boot (00026800, 00008000) 16 MB
P12: recovery (0002E800, 00008000) 16 MB
P13: recoverybak (00036800, 00008000) 16 MB
P14: logo (0003E800, 00004000) 8 MB
P15: lo_bak_go (00042800, 00004000) 8 MB
P16: expdb (00046800, 00005000) 10 MB
P17: seccfg (0004B800, 00000400) 512 KB
P18: oemkeystore (0004BC00, 00001000) 2048 KB
P19: secro (0004CC00, 00003000) 6 MB
P20: keystore (0004FC00, 00004000) 8 MB
P21: tee1 (00053C00, 00002800) 5 MB
P22: tee2 (00056400, 00002800) 5 MB
P23: eksst (00058C00, 00000400) 512 KB
P24: encrypt (00059000, 00000400) 512 KB
P25: persist_lg (00059400, 00004000) 8 MB
P26: mpt (0005D400, 0000B000) 22 MB
P27: persistent (00068400, 00001000) 2048 KB
P28: lgfota (00069400, 00005000) 10 MB
P29: cust (0006E400, 00019000) 50 MB
P30: rct (00087400, 00000800) 1024 KB
P31: factory (00087C00, 0000E000) 28 MB
P32: persist (00095C00, 00018000) 48 MB
P33: efuse (000ADC00, 00000400) 512 KB
P34: frp (000AE000, 00000800) 1024 KB
P35: nvdata (000AE800, 00011800) 35 MB
P36: system (000C0000, 00568000) 2768 MB
P37: cache (00628000, 00098000) 304 MB
P38: OP (006C0000, 000B0000) 352 MB
P39: userdata (00770000, 00717C00) 3632 MB
P40: flashinfo (00E87C00, 00008000) 16 MB
Backuping nvdata partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/H8G1e_nvdata_0xae800_0x11800_06_12_2021_12_46_19.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:14
SW: 2.2.2; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 786432
Number of sectors : 5668864
Device Manufacturer : lge
Device Platform : mt6735
Build ID : MRA58K
Display Build ID : MRA58K
Release ID : 6.0
Device Model : LG-K350
Device Name : mm1v_global_com
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : mm1v_global_com-user 6.0 MRA58K 190441940eb42 release-keys
---------------------------------------------------------------
Repairing from file "C:/Users/LENOVO/Desktop/RM-604/LG_k8_K350.srf".
Write data verification is enabled.
Switched to boot area partition 1.
Writing BOOT1 partition... Done.
Switched to boot area partition 2.
Writing BOOT2 partition... Done.
Switched to user area.
Writing GPT partition... Done.
Writing proinfo partition... Done.
Writing misc2 partition... Done.
Writing ftm partition... Done.
Writing nvram partition... Done.
Writing protect1 partition... Done.
Writing protect2 partition... Done.
Writing lk partition... Done.
Writing lkbak partition... Done.
Writing laf partition... Done.
Writing para partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing recoverybak partition... Done.
Writing logo partition... Done.
Writing lo_bak_go partition... Done.
Writing expdb partition... Done.
Writing seccfg partition... Done.
Writing oemkeystore partition... Done.
Writing secro partition... Done.
Writing keystore partition... Done.
Writing tee1 partition... Done.
Writing tee2 partition... Done.
Writing eksst partition... Done.
Writing encrypt partition... Done.
Writing persist_lg partition... Done.
Writing mpt partition... Done.
Writing persistent partition... Done.
Writing lgfota partition... Done.
Writing cust partition... Done.
Writing rct partition... Done.
Writing factory partition... Done.
Writing persist partition... Done.
Writing efuse partition... Done.
Writing frp partition... Done.
Writing nvdata partition... Done.
Smart Repair is successfully complete.
SW: 2.2.2; FW: 1.24.
Disconnected.
[LEFT]Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC RH64AB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010052483634414205FE2896C57625
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RH64AB
Full name one from : KMRH60014A-B614
Product revision : 0.5
Product serial number : (hex) FE2896C5
Manufacturing date : 07/2019
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RH64AB_13_12_2021_17_28_27.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: fsc (0003F828, 00000002) 1024 b
P09: ssd (0003F830, 00000010) 8 KB
P10: sbl1 (0003F840, 00000400) 512 KB
P11: rpm (0003FC40, 00000400) 512 KB
P12: tz (00040040, 00001000) 2048 KB
P13: devcfg (00041040, 00000200) 256 KB
P14: sbl1bak (00041240, 00000400) 512 KB
P15: rpmbak (00041640, 00000400) 512 KB
P16: tzbak (00041A40, 00001000) 2048 KB
P17: devcfgbak (00042A40, 00000200) 256 KB
P18: dsp (00042C40, 00008000) 16 MB
P19: DDR (0004C000, 00000040) 32 KB
P20: fsg (0004C040, 00000C00) 1536 KB
P21: sec (0004CC40, 00000020) 16 KB
P22: aboot (0004CC60, 00000800) 1024 KB
P23: abootbak (0004D460, 00000800) 1024 KB
P24: modem (0004DC60, 00040000) 128 MB
P25: dtbo (0008DC60, 00004000) 8 MB
P26: vbmeta (00091C60, 00000080) 64 KB
P27: boot (00091CE0, 00020000) 64 MB
P28: recovery (000B1CE0, 00020000) 64 MB
P29: devinfo (000D1CE0, 00000800) 1024 KB
P30: splash (000D4000, 00005800) 11 MB
P31: LOGO (000D9800, 00010000) 32 MB
P32: DRIVER (000E9800, 00010000) 32 MB
P33: cache (000F9800, 00080000) 256 MB
P34: misc (00179800, 00000800) 1024 KB
P35: keystore (0017A000, 00000400) 512 KB
P36: config (0017A400, 00000040) 32 KB
P37: oem (0017A440, 00000800) 1024 KB
P38: limits (0017C000, 00000040) 32 KB
P39: mota (00180000, 00000400) 512 KB
P40: dip (00180400, 00000800) 1024 KB
P41: mdtp (00180C00, 00010000) 32 MB
P42: syscfg (00190C00, 00000400) 512 KB
P43: mcfg (00191000, 00002000) 4 MB
P44: lksecapp (00194000, 00000100) 128 KB
P45: cmnlib (00194100, 00000800) 1024 KB
P46: cmnlib64 (00194900, 00000800) 1024 KB
P47: keymaster (00195100, 00000800) 1024 KB
P48: lksecappbak (00195900, 00000100) 128 KB
P49: cmnlibbak (00195A00, 00000800) 1024 KB
P50: cmnlib64bak (00196200, 00000800) 1024 KB
P51: keymasterbak (00196A00, 00000800) 1024 KB
P52: apdp (00198000, 00000200) 256 KB
P53: msadp (00198200, 00000200) 256 KB
P54: dpo (00198400, 00000010) 8 KB
P55: logdump (00198410, 00020000) 64 MB
P56: vm-kystore (001B8410, 00000800) 1024 KB
P57: vm-data (001B8C10, 00005000) 10 MB
P58: hyp (001C0000, 00004000) 8 MB
P59: vm-system (001C4000, 00020000) 64 MB
P60: vm-linux (001E4000, 00010000) 32 MB
P61: system (001F4000, 007F0000) 4064 MB
P62: vendor (009E4000, 0020FB00) 1055 MB
P63: userdata (00BF4000, 06887FDF) 52.27 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst1_0xa028_0xc00_13_12_2021_17_28_27.b in file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst2_0xac28_0xc00_13_12_2021_17_28_27.b in file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_fsg_0x4c040_0xc00_13_12_2021_17_28_27.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 2048000
Number of sectors : 8323072
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210306.003935 release-keys
---------------------------------------------------------------
Reset operation finished
Reset operation finished
Disconnected.[/LEFT]
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 517472
Number of sectors : 5029888
Build ID : RKQ1.210215.001
Display Build ID : 00WW_2_160_SP06
Release ID : 11
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description 2 : 00WW_2_16F
---------------------------------------------------------------
Partition table has been found on device.
Erasing. Please wait...
Erasing partition userdata... Done.
Erasing is finished.
SW: 2.2.4.7; FW: 1.24.
Welcome to Medusa Pro Software version 2.2.4.7.Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
[COLOR=#ff3300]Please disconnect battery and USB cable.[/COLOR]
[COLOR=#FF3300]
[/COLOR]
[COLOR=#007acc]Model Settings:[/COLOR]
Interface : [COLOR=#008c00]eMMC[/COLOR]
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
[COLOR=#007acc]Connecting...[/COLOR]
Device : [COLOR=#008c00]Samsung eMMC QE63MB[/COLOR]
Page size : [COLOR=#008c00]512 B[/COLOR]
Block size : [COLOR=#008c00]512 B[/COLOR]
Block count : [COLOR=#008c00]30535680[/COLOR]
Size : [COLOR=#008c00]14.56 GB (14910.00 MB)[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]CID Info[/COLOR]
[COLOR=#007ACC]
[/COLOR]
CID : 150100514536334D4206CB379B15A535
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Full name one from : [COLOR=#008c00]KMQE60013M-B318[/COLOR]
Product revision : 0.6
Product serial number : (hex) CB379B15
Manufacturing date : 10/2018
---------------------------------------------------------------
[COLOR=#007acc]CSD Info[/COLOR]
[COLOR=#007ACC]
[/COLOR]
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
[COLOR=#007acc]EXTCSD Info[/COLOR]
[COLOR=#007ACC]
[/COLOR]
Revision 1.8 (for MMC v5.1)
Erase block size : [COLOR=#008c00]512 Kbytes[/COLOR]
Boot1 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
Boot2 size : [COLOR=#008c00]4096 Kbytes[/COLOR]
RPMB size : [COLOR=#008c00]4096 Kbytes[/COLOR]
[COLOR=#008C00]
[/COLOR]
Partition config : [COLOR=#008c00](0x38) 00111000[/COLOR]
Boot partition enable : [COLOR=#008c00]User area[/COLOR]
[COLOR=#007acc](Bus width = 1Bit)[/COLOR]
Boot ACK : [COLOR=#008c00]No boot acknowledge sent (default)[/COLOR]
[COLOR=#008C00]
[/COLOR]
Boot bus conditions : [COLOR=#008c00](0x00) 00000000[/COLOR]
Boot bus width : [COLOR=#008c00]x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)[/COLOR]
Reset boot bus conditions : [COLOR=#008c00]Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)[/COLOR]
Boot mode : [COLOR=#008c00]Use single data rate + backward compatible timings in boot operation (default)[/COLOR]
[COLOR=#008C00]
[/COLOR]
RST_n function : [COLOR=#008c00](0x01) RST_n signal is permanently enabled[/COLOR]
[COLOR=#008C00]
[/COLOR]
Partitioning support : [COLOR=#008c00]Device supports partitioning features[/COLOR]
Enhanced attribute : [COLOR=#008c00]Device can have enhanced technological features in partitions and user data area.[/COLOR]
Max enhanced data size: [COLOR=#008c00]7626752 Kbytes[/COLOR]
Partitions attribute : [COLOR=#008c00]0x0[/COLOR]
Part setting completed: [COLOR=#008c00]0x0[/COLOR]
GP partition 1 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 2 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 3 size : [COLOR=#008c00]0 b[/COLOR]
GP partition 4 size : [COLOR=#008c00]0 b[/COLOR]
Enhanced area size : [COLOR=#008c00](0x0) 0 b[/COLOR]
Enhanced area start : [COLOR=#008c00](0x0) 0 b[/COLOR]
[COLOR=#008C00]
[/COLOR]
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_21_10_2022_15_45_58.bin.
[COLOR=#008c00]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
P00: GPT (00000000, 00005000) 20 KB
P01: oppodycnvbk (00005000, 00A00000) 10 MB
P02: oppostanvbk (00A05000, 00A00000) 10 MB
P03: modemst1 (01405000, 00180000) 1536 KB
P04: modemst2 (01585000, 00180000) 1536 KB
P05: persist (01705000, 02000000) 32 MB
P06: opporeserve1 (03705000, 00800000) 8 MB
P07: opporeserve2 (03F05000, 04000000) 64 MB
P08: reserve_exp1 (07F05000, 00200000) 2048 KB
P09: reserve_exp2 (08105000, 00200000) 2048 KB
P10: fsc (08305000, 00000400) 1024 b
P11: ssd (08306000, 00002000) 8 KB
P12: sbl1 (08308000, 00080000) 512 KB
P13: rpm (08388000, 00080000) 512 KB
P14: tz (08408000, 00200000) 2048 KB
P15: devcfg (08608000, 00040000) 256 KB
P16: sbl1bak (08648000, 00080000) 512 KB
P17: rpmbak (086C8000, 00080000) 512 KB
P18: tzbak (08748000, 00200000) 2048 KB
P19: devcfgbak (08948000, 00040000) 256 KB
P20: dsp (08988000, 01000000) 16 MB
P21: DDR (0A000000, 00008000) 32 KB
P22: fsg (0A008000, 00180000) 1536 KB
P23: sec (0A188000, 00004000) 16 KB
P24: aboot (0A18C000, 00100000) 1024 KB
P25: abootbak (0A28C000, 00100000) 1024 KB
P26: modem (0A38C000, 08000000) 128 MB
P27: dtbo (1238C000, 00800000) 8 MB
P28: vbmeta (12B8C000, 00010000) 64 KB
P29: boot (12B9C000, 04000000) 64 MB
P30: recovery (16B9C000, 04000000) 64 MB
P31: devinfo (1AB9C000, 00100000) 1024 KB
P32: splash (1B000000, 00B00000) 11 MB
P33: LOGO (1BB00000, 02000000) 32 MB
P34: DRIVER (1DB00000, 02000000) 32 MB
P35: cache (1FB00000, 10000000) 256 MB
P36: misc (2FB00000, 00100000) 1024 KB
P37: keystore (2FC00000, 00080000) 512 KB
P38: config (2FC80000, 00008000) 32 KB
P39: oem (2FC88000, 00100000) 1024 KB
P40: limits (30000000, 00008000) 32 KB
P41: mota (30800000, 00080000) 512 KB
P42: dip (30880000, 00100000) 1024 KB
P43: mdtp (30980000, 02000000) 32 MB
P44: syscfg (32980000, 00080000) 512 KB
P45: mcfg (32A00000, 00400000) 4 MB
P46: lksecapp (33000000, 00020000) 128 KB
P47: cmnlib (33020000, 00100000) 1024 KB
P48: cmnlib64 (33120000, 00100000) 1024 KB
P49: keymaster (33220000, 00100000) 1024 KB
P50: lksecappbak (33320000, 00020000) 128 KB
P51: cmnlibbak (33340000, 00100000) 1024 KB
P52: cmnlib64bak (33440000, 00100000) 1024 KB
P53: keymasterbak (33540000, 00100000) 1024 KB
P54: apdp (33800000, 00040000) 256 KB
P55: msadp (33840000, 00040000) 256 KB
P56: dpo (33880000, 00002000) 8 KB
P57: logdump (33882000, 04000000) 64 MB
P58: vm-kystore (37882000, 00100000) 1024 KB
P59: vm-data (37982000, 00A00000) 10 MB
P60: hyp (38800000, 00800000) 8 MB
P61: vm-system (39000000, 04000000) 64 MB
P62: vm-linux (3D000000, 02000000) 32 MB
P63: system (3F000000, D6900000) 3433 MB
P64: vendor (115900000, 41F60000) 1055 MB
P65: userdata (158000000, 24BDFBE00) 9.186 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_modemst1_0xa028_0xc00_21_10_2022_15_45_58.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_modemst2_0xac28_0xc00_21_10_2022_15_45_58.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_fsg_0x50040_0xc00_21_10_2022_15_45_58.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
[COLOR=#007ACC]
[/COLOR]
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2064384
Number of sectors : 7030784
Device Manufacturer : [COLOR=#008c00]OPPO[/COLOR]
Build ID : [COLOR=#008c00]OPM1.171019.026[/COLOR]
Release ID : [COLOR=#008c00]8.1.0[/COLOR]
Architecture ABI : [COLOR=#008c00]arm64-v8a[/COLOR]
Architecture ABI List : [COLOR=#008c00]arm64-v8a,armeabi-v7a,armeabi[/COLOR]
Build Description : [COLOR=#008c00]msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210122.143520 release-keys[/COLOR]
[COLOR=#008C00]
[/COLOR]
---------------------------------------------------------------
[COLOR=#008c00]Reset operation finished[/COLOR]
[COLOR=#008C00]
[/COLOR]
[LEFT]Welcome to Medusa Pro Software version 2.2.4.7.
Started.
Reader #0: Alcorlink USB Smart Card Reader 0
Reader #1: Alcorlink USB Smart Card Reader 1
Reader #2: Alcorlink USB Smart Card Reader 2
Extracting file DAA_AUTH_FILE... Done
Extracting file EFUSE_CONFIG... Done
Extracting file EFUSE_INI... Done
Extracting file MC_MT064GASAO2U21_0109.fw... Done
Extracting file MC_MT128GASAO4U21_0109.fw... Done
Extracting file Projectconfig.xml... Done
Extracting file SK_H9HQ15ACPMBDAR_A043.fw... Done
Extracting file SK_H9HQ15AECMBDAR_A043.fw... Done
Extracting file SS_KM2L9001CM-B518_0700.fw... Done
Extracting file SS_KM5P9001DM-B424_0300.fw... Done
Extracting file all-in-one-signature.bin... Done
Extracting file audio_dsp... Done
Extracting file boot... Done
Extracting file cache... Done
Extracting file cdt_engineering... Done
Extracting file cdt_engineering.sig... Done
Extracting file dtbo... Done
Extracting file gz1... Done
Extracting file gz2... Done
Extracting file hash256_id.txt... Done
Extracting file img_list.txt... Done
Extracting file lk... Done
Extracting file lk2... Done
Extracting file logo... Done
Extracting file md1img... Done
Extracting file odm.sig... Done
Extracting file oplus21690.bin... Done
Extracting file oplusreserve2... Done
Extracting file pi_img... Done
Extracting file preloader... Done
Extracting file recovery... Done
Extracting file scatter... Done
Extracting file scp1... Done
Extracting file scp2... Done
Extracting file spmfw... Done
Extracting file sspm_1... Done
Extracting file sspm_2... Done
Extracting file super.0.194caa4c... Done
Extracting file super.1.1eebe8e4... Done
Extracting file super.2.0a13a857... Done
Extracting file super.2.8bc8a895... Done
Extracting file super.2.fa081ce0... Done
Extracting file super_map.csv... Done
Extracting file tee1... Done
Extracting file tee2... Done
Extracting file userdata... Done
Extracting file userdata.sig... Done
Extracting file vbmeta... Done
Extracting file vbmeta_system... Done
Extracting file vbmeta_vendor... Done
Extracting finished
[/LEFT]
[LEFT][B][SIZE=2]Welcome to Medusa Pro Software version 2.2.4.7.
Started.
Reader #0: Alcorlink USB Smart Card Reader 0
Reader #1: Alcorlink USB Smart Card Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.0V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : 1 MHz
Connecting...
Device : Samsung eMMC RH64AB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010052483634414205FF2D97D5767B
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : RH64AB
Full name one from : KMRH60014A-B614
Product revision : 0.5
Product serial number : (hex) FF2D97D5
Manufacturing date : 07/2019
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/RH64AB_30_12_2022_15_37_06.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: fsc (0003F828, 00000002) 1024 b
P09: ssd (0003F830, 00000010) 8 KB
P10: sbl1 (0003F840, 00000400) 512 KB
P11: rpm (0003FC40, 00000400) 512 KB
P12: tz (00040040, 00001000) 2048 KB
P13: devcfg (00041040, 00000200) 256 KB
P14: sbl1bak (00041240, 00000400) 512 KB
P15: rpmbak (00041640, 00000400) 512 KB
P16: tzbak (00041A40, 00001000) 2048 KB
P17: devcfgbak (00042A40, 00000200) 256 KB
P18: dsp (00042C40, 00008000) 16 MB
P19: DDR (0004C000, 00000040) 32 KB
P20: fsg (0004C040, 00000C00) 1536 KB
P21: sec (0004CC40, 00000020) 16 KB
P22: aboot (0004CC60, 00000800) 1024 KB
P23: abootbak (0004D460, 00000800) 1024 KB
P24: modem (0004DC60, 00040000) 128 MB
P25: dtbo (0008DC60, 00004000) 8 MB
P26: vbmeta (00091C60, 00000080) 64 KB
P27: boot (00091CE0, 00020000) 64 MB
P28: recovery (000B1CE0, 00020000) 64 MB
P29: devinfo (000D1CE0, 00000800) 1024 KB
P30: splash (000D4000, 00005800) 11 MB
P31: LOGO (000D9800, 00010000) 32 MB
P32: DRIVER (000E9800, 00010000) 32 MB
P33: cache (000F9800, 00080000) 256 MB
P34: misc (00179800, 00000800) 1024 KB
P35: keystore (0017A000, 00000400) 512 KB
P36: config (0017A400, 00000040) 32 KB
P37: oem (0017A440, 00000800) 1024 KB
P38: limits (0017C000, 00000040) 32 KB
P39: mota (00180000, 00000400) 512 KB
P40: dip (00180400, 00000800) 1024 KB
P41: mdtp (00180C00, 00010000) 32 MB
P42: syscfg (00190C00, 00000400) 512 KB
P43: mcfg (00191000, 00002000) 4 MB
P44: lksecapp (00194000, 00000100) 128 KB
P45: cmnlib (00194100, 00000800) 1024 KB
P46: cmnlib64 (00194900, 00000800) 1024 KB
P47: keymaster (00195100, 00000800) 1024 KB
P48: lksecappbak (00195900, 00000100) 128 KB
P49: cmnlibbak (00195A00, 00000800) 1024 KB
P50: cmnlib64bak (00196200, 00000800) 1024 KB
P51: keymasterbak (00196A00, 00000800) 1024 KB
P52: apdp (00198000, 00000200) 256 KB
P53: msadp (00198200, 00000200) 256 KB
P54: dpo (00198400, 00000010) 8 KB
P55: logdump (00198410, 00020000) 64 MB
P56: vm-kystore (001B8410, 00000800) 1024 KB
P57: vm-data (001B8C10, 00005000) 10 MB
P58: hyp (001C0000, 00004000) 8 MB
P59: vm-system (001C4000, 00020000) 64 MB
P60: vm-linux (001E4000, 00010000) 32 MB
P61: system (001F4000, 007F0000) 4064 MB
P62: vendor (009E4000, 0020FB00) 1055 MB
P63: userdata (00BF4000, 06887FDF) 52.27 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst1_0xa028_0xc00_30_12_2022_15_37_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_modemst2_0xac28_0xc00_30_12_2022_15_37_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/RH64AB_fsg_0x4c040_0xc00_30_12_2022_15_37_07.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:12
SW: 2.2.4.7; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 2048000
Number of sectors : 8323072
Device Manufacturer : OPPO
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210306.003935 release-keys
---------------------------------------------------------------
[COLOR="#0000FF"]Reset operation finished[/COLOR]
[COLOR="#FF0000"]Disconnected.[/COLOR]
[/SIZE][/B][/LEFT]
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Hynix eMMC hDEaP3
Page size : 512 B
Block size : 512 B
Block count : 244285440
Size : 116.48 GB (119280.00 MB)
---------------------------------------------------------------
CID Info
CID : 90014A684445615033034F0A5EE875C5
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : hDEaP3
Product revision : 0.3
Product serial number : (hex) 4F0A5EE8
Manufacturing date : 07/2018
---------------------------------------------------------------
CSD Info
CSD : D02700328F5903FFFFFFFFEF8E400043
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 40714240 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/hDEaP3_02_04_2023_15_58_14.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00001000) 2048 KB
P04: modemst2 (0000B028, 00001000) 2048 KB
P05: persist (0000C028, 00010000) 32 MB
P06: opporeserve1 (0001C028, 00004000) 8 MB
P07: opporeserve2 (00020028, 00020000) 64 MB
P08: carrier (00040028, 00004000) 8 MB
P09: xbl (00048000, 00001C00) 3584 KB
P10: xblbak (00049C00, 00001C00) 3584 KB
P11: tz (0004B800, 00002000) 4 MB
P12: tzbak (0004D800, 00002000) 4 MB
P13: rpm (0004F800, 00000400) 512 KB
P14: rpmbak (0004FC00, 00000400) 512 KB
P15: hyp (00050000, 00000400) 512 KB
P16: hypbak (00050400, 00000400) 512 KB
P17: pmic (00050800, 00000400) 512 KB
P18: pmicbak (00050C00, 00000400) 512 KB
P19: fsg (00051000, 00001000) 2048 KB
P20: boot (00054000, 00020000) 64 MB
P21: bootbak (00074000, 00020000) 64 MB
P22: recovery (00094000, 00020000) 64 MB
P23: keymaster (000B4000, 00000800) 1024 KB
P24: keymasterbak (000B4800, 00000800) 1024 KB
P25: cmnlib (000B5000, 00000800) 1024 KB
P26: cmnlib64 (000B5800, 00000800) 1024 KB
P27: cmnlibbak (000B6000, 00000800) 1024 KB
P28: cmnlib64bak (000B6800, 00000800) 1024 KB
P29: mdtpsecapp (000B7000, 00002000) 4 MB
P30: mdtpsecappbak (000B9000, 00002000) 4 MB
P31: mdtp (000BB000, 00010000) 32 MB
P32: mdtpbak (000CB000, 00010000) 32 MB
P33: dsp (000DB000, 00008000) 16 MB
P34: dspbak (000E3000, 00008000) 16 MB
P35: abl (000EB000, 00000800) 1024 KB
P36: ablbak (000EB800, 00000800) 1024 KB
P37: dip (000EC000, 00000800) 1024 KB
P38: devinfo (000EC800, 00000008) 4 KB
P39: apdp (000EC808, 00000200) 256 KB
P40: msadp (000ECA08, 00000200) 256 KB
P41: dpo (000ECC08, 00000002) 1024 b
P42: splash (000ECC10, 00010520) 32.64 MB
P43: limits (000FD130, 00000008) 4 KB
P44: toolsfv (000FD138, 00000800) 1024 KB
P45: logfs (00100000, 00004000) 8 MB
P46: ddr (00104000, 00000800) 1024 KB
P47: sec (00104800, 00000020) 16 KB
P48: bluetooth (00104820, 00000800) 1024 KB
P49: bluetoothbak (00105020, 00000800) 1024 KB
P50: fsc (00108000, 00000002) 1024 b
P51: ssd (00108008, 00000010) 8 KB
P52: misc (00108018, 00000800) 1024 KB
P53: keystore (00108818, 00000400) 512 KB
P54: devcfg (00108C18, 00000800) 1024 KB
P55: devcfgbak (00109418, 00000800) 1024 KB
P56: frp (00109C18, 00000400) 512 KB
P57: logdump (0010A018, 00020000) 64 MB
P58: sti (0012A018, 00001000) 2048 KB
P59: LOGO (0012B018, 00008000) 16 MB
P60: DRIVER (00133018, 00010000) 32 MB
P61: vbmeta (00144000, 00000080) 64 KB
P62: vbmetabak (00144080, 00000080) 64 KB
P63: modem (00144100, 00040000) 128 MB
P64: cache (00188000, 00080000) 256 MB
P65: system (00208000, 00864000) 4.195 GB
P66: vendor (00A6C000, 00300000) 1536 MB
P67: odm (00D6C000, 00080000) 256 MB
P68: storsec (00DEC000, 00000100) 128 KB
P69: userdata (00DF0000, 0DB07FDF) 109.5 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hDEaP3_modemst1_0xa028_0x1000_02_04_2023_15_58_14.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hDEaP3_modemst2_0xb028_0x1000_02_04_2023_15_58_14.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/hDEaP3_fsg_0x51000_0x1000_02_04_2023_15_58_14.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 1f000000 bytes
Device sector size : 512 bytes
Partition offset : 2129920
Number of sectors : 8798208
Build ID : QKQ1.191224.003
Release ID : 10
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
---------------------------------------------------------------
Reset operation finished
Reset operation finished
Disconnected.
[LEFT]Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Foresee eMMC SLD32G
Page size : 512 B
Block size : 512 B
Block count : 60620800
Size : 28.91 GB (29600.00 MB)
---------------------------------------------------------------
CID Info
CID : 880103534C4433324755D0D19A9039C9
Manufacturer ID : 0X88
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X03
Product name : SLD32G
Product revision : 5.5
Product serial number : (hex) D0D19A90
Manufacturing date : 03/2022
---------------------------------------------------------------
CSD Info
CSD : D0FFFF329F5903FFFFFFFFE79640001D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 80 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 10100736 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SLD32G_15_07_2023_23_28_43.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: prodnv (00000800, 00005000) 10 MB
P02: elabel (00005800, 00005000) 10 MB
P03: miscdata (0000A800, 00000800) 1024 KB
P04: misc (0000B000, 00000800) 1024 KB
P05: trustos_a (0000B800, 00003000) 6 MB
P06: trustos_b (0000E800, 00003000) 6 MB
P07: sml_a (00011800, 00000800) 1024 KB
P08: sml_b (00012000, 00000800) 1024 KB
P09: uboot_a (00012800, 00000800) 1024 KB
P10: uboot_b (00013000, 00000800) 1024 KB
P11: uboot_log (00013800, 00002000) 4 MB
P12: logo (00015800, 00003000) 6 MB
P13: fbootlogo (00018800, 00003000) 6 MB
P14: l_fixnv1_a (0001B800, 00001000) 2048 KB
P15: l_fixnv2_a (0001C800, 00001000) 2048 KB
P16: l_fixnv1_b (0001D800, 00001000) 2048 KB
P17: l_fixnv2_b (0001E800, 00001000) 2048 KB
P18: l_runtimenv1 (0001F800, 00001000) 2048 KB
P19: l_runtimenv2 (00020800, 00001000) 2048 KB
P20: gpsgl_a (00021800, 00000800) 1024 KB
P21: gpsgl_b (00022000, 00000800) 1024 KB
P22: gpsbd_a (00022800, 00000800) 1024 KB
P23: gpsbd_b (00023000, 00000800) 1024 KB
P24: wcnmodem_a (00023800, 00005000) 10 MB
P25: wcnmodem_b (00028800, 00005000) 10 MB
P26: persist (0002D800, 00001000) 2048 KB
P27: l_modem_a (0002E800, 0000C800) 25 MB
P28: l_modem_b (0003B000, 0000C800) 25 MB
P29: l_deltanv_a (00047800, 00000800) 1024 KB
P30: l_deltanv_b (00048000, 00000800) 1024 KB
P31: l_gdsp_a (00048800, 00005000) 10 MB
P32: l_gdsp_b (0004D800, 00005000) 10 MB
P33: l_ldsp_a (00052800, 0000A000) 20 MB
P34: l_ldsp_b (0005C800, 0000A000) 20 MB
P35: pm_sys_a (00066800, 00000800) 1024 KB
P36: pm_sys_b (00067000, 00000800) 1024 KB
P37: teecfg_a (00067800, 00000800) 1024 KB
P38: teecfg_b (00068000, 00000800) 1024 KB
P39: hypervsior_a (00068800, 00001000) 2048 KB
P40: hypervsior_b (00069800, 00001000) 2048 KB
P41: boot_a (0006A800, 00020000) 64 MB
P42: boot_b (0008A800, 00020000) 64 MB
P43: vendor_boot_a (000AA800, 00032000) 100 MB
P44: vendor_boot_b (000DC800, 00032000) 100 MB
P45: dtb_a (0010E800, 00004000) 8 MB
P46: dtb_b (00112800, 00004000) 8 MB
P47: dtbo_a (00116800, 00004000) 8 MB
P48: dtbo_b (0011A800, 00004000) 8 MB
P49: super (0011E800, 004F6000) 2540 MB
P50: cache (00614800, 00032000) 100 MB
P51: socko_a (00646800, 00025800) 75 MB
P52: socko_b (0066C000, 00025800) 75 MB
P53: odmko_a (00691800, 0000C800) 25 MB
P54: odmko_b (0069E000, 0000C800) 25 MB
P55: vbmeta_a (006AA800, 00000800) 1024 KB
P56: vbmeta_b (006AB000, 00000800) 1024 KB
P57: metadata (006AB800, 00008000) 16 MB
P58: vbmeta_system_a (006B3800, 00000800) 1024 KB
P59: vbmeta_system_b (006B4000, 00000800) 1024 KB
P60: vbmeta_vendor_a (006B4800, 00000800) 1024 KB
P61: vbmeta_vendor_b (006B5000, 00000800) 1024 KB
P62: vbmeta_custom1_a (006B5800, 00000800) 1024 KB
P63: vbmeta_custom1_b (006B6000, 00000800) 1024 KB
P64: vbmeta_system_ext_a (006B6800, 00000800) 1024 KB
P65: vbmeta_system_ext_b (006B7000, 00000800) 1024 KB
P66: vbmeta_product_a (006B7800, 00000800) 1024 KB
P67: vbmeta_product_b (006B8000, 00000800) 1024 KB
P68: vbmeta_odm_a (006B8800, 00000800) 1024 KB
P69: vbmeta_odm_b (006B9000, 00000800) 1024 KB
P70: sysdumpdb (006B9800, 00005000) 10 MB
P71: avbmeta_rs_a (006BE800, 00000800) 1024 KB
P72: avbmeta_rs_b (006BF000, 00000800) 1024 KB
P73: common_rs1_a (006BF800, 00001000) 2048 KB
P74: common_rs1_b (006C0800, 00001000) 2048 KB
P75: userdata (006C1800, 0330E7DF) 25.53 GB
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 3a000000 bytes
Device sector size : 512 bytes
Partition offset : 1173504
Number of sectors : 5201920
Build ID : RP1A.201005.001
Release ID : 11
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : Cosmo_00WW-user 11 RP1A.201005.001 V1.870_B01 release-keys
---------------------------------------------------------------
[COLOR="#0000FF"]Partition table has been found on device.
Erasing. Please wait...
Erasing partition [COLOR="#DAA520"]persist[/COLOR]... Done.
Erasing partition [COLOR="#DAA520"]userdata[/COLOR]... Done.
Erasing is finished.[/COLOR]
SW: 2.2.4.7; FW: 1.24.
Disconnected.
[/LEFT]
[LEFT]Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC DX68MB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100445836384D4200CB5CD29929B9
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DX68MB
Full name one from : KMDX60018M-B425
Product revision : 0.0
Product serial number : (hex) CB5CD299
Manufacturing date : 02/2022
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DX68MB_26_07_2023_00_56_29.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: prodnv (00000800, 00005000) 10 MB
P02: miscdata (00005800, 00000800) 1024 KB
P03: l_fixnv1 (00006000, 00001000) 2048 KB
P04: l_fixnv2 (00007000, 00001000) 2048 KB
P05: l_deltanv (00008000, 00000800) 1024 KB
P06: l_runtimenv1 (00008800, 00001000) 2048 KB
P07: l_runtimenv2 (00009800, 00001000) 2048 KB
P08: misc (0000A800, 00000800) 1024 KB
P09: param (0000B000, 00005000) 10 MB
P10: vendor_efs (00010000, 00008000) 16 MB
P11: sec_efs (00018000, 00008000) 16 MB
P12: persist (00020000, 00004000) 8 MB
P13: steady (00024000, 00002000) 4 MB
P14: persistent (00026000, 00000800) 1024 KB
P15: pad (00026800, 00001800) 3072 KB
P16: trustos (00028000, 00003000) 6 MB
P17: trustos_bak (0002B000, 00003000) 6 MB
P18: sml (0002E000, 00000800) 1024 KB
P19: sml_bak (0002E800, 00000800) 1024 KB
P20: pm_sys (0002F000, 00001000) 2048 KB
P21: teecfg (00030000, 00000800) 1024 KB
P22: teecfg_bak (00030800, 00000800) 1024 KB
P23: tzar (00031000, 00002000) 4 MB
P24: uboot (00033000, 00002800) 5 MB
P25: uboot_bak (00035800, 00000800) 1024 KB
P26: vbmeta (00036000, 00000800) 1024 KB
P27: vbmeta_bak (00036800, 00000800) 1024 KB
P28: btd (00037000, 00001000) 2048 KB
P29: uboot_log (00038000, 00008000) 16 MB
P30: logo (00040000, 00003000) 6 MB
P31: fbootlogo (00043000, 00002000) 4 MB
P32: bota (00045000, 00008800) 17 MB
P33: debug (0004D800, 00005000) 10 MB
P34: gnssmodem (00052800, 00000800) 1024 KB
P35: wcnmodem (00053000, 00005000) 10 MB
P36: l_gdsp (00058000, 00005000) 10 MB
P37: l_ldsp (0005D000, 0000A000) 20 MB
P38: l_modem (00067000, 0000F000) 30 MB
P39: boot (00076000, 00020000) 64 MB
P40: recovery (00096000, 00020000) 64 MB
P41: dtbo (000B6000, 00004000) 8 MB
P42: socko (000BA000, 00025800) 75 MB
P43: odmko (000DF800, 0000C000) 24 MB
P44: metadata (000EB800, 00008000) 16 MB
P45: vbmeta_system (000F3800, 00000800) 1024 KB
P46: vbmeta_vendor (000F4000, 00000800) 1024 KB
P47: pad2 (000F4800, 00003800) 7 MB
P48: super (000F8000, 00C99000) 6.299 GB
P49: prism (00D91000, 00094000) 296 MB
P50: optics (00E25000, 0000C000) 24 MB
P51: cache (00E31000, 00064000) 200 MB
P52: omr (00E95000, 0000A000) 20 MB
P53: sysdumpdb (00E9F000, 00005000) 10 MB
P54: l_agdsp (00EA4000, 00003000) 6 MB
P55: userdata (00EA7000, 02B95000) 21.79 GB
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 1015808
Number of sectors : 13209600
Build ID : RP1A.200720.012
Display Build ID : RP1A.200720.012.A035FXXU1AVG8
Release ID : 11
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : a03nnxx-user 11 RP1A.200720.012 A035FXXU1AVG8 release-keys
---------------------------------------------------------------
Smart report info:
Hash code:
C2F185D313DF60EC3B06A4AE00527F31A461EA0020167FC7C763B4A5A62E1249
Error mode : Normal
Super block size : 0x03180000 Bytes
Super page size : 0x00008000 Bytes
Optimal write size : 0x00010000 Bytes
Number of banks : 2
Bank0 init bad block : 2
Bank0 runtime bad block : 0
Bank0 remain reserved block : 11
Bank1 init bad block : 3
Bank1 runtime bad block : 0
Bank1 remain reserved block : 10
Bank2 init bad block : 0
Bank2 runtime bad block : 0
Bank2 remain reserved block : 0
Bank3 init bad block : 0
Bank3 runtime bad block : 0
Bank3 remain reserved block : 0
Max erase count : 1609
Min erase count : 2
Avg erase count : 74
Read reclaim count : 0
Optimal trim size : 0x00001000 Bytes
Max erase count (SLC) : 1609
Min erase count (SLC) : 1380
Avg erase count (SLC) : 1587
Max erase count (MLC) : 114
Min erase count (MLC) : 2
Avg erase count (MLC) : 46
DEVICE_LIFE_TIME_EST_TYP_B : 0% - 10% device life time used
DEVICE_LIFE_TIME_EST_TYP_A : 0% - 10% device life time used
PRE_EOL_INFO : Normal
SW: 2.2.4.7; FW: 1.24.
Writing eMMC firmware from file: I:/A035F/KG LOCKED/BOOT/KMDX60018M-B425_VCT0_BY_SADEWO_PCB.BIN...Done.
Finalizing...Done.
[COLOR="#FF8C00"]Write CID error.[/COLOR]
Disconnected.
EMMC writing firmware Done.
SW: 2.2.4.7; FW: 1.24.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
[COLOR="#0000FF"]Voltage : 2.8V[/COLOR]
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 1048576
Size : 512.00 MB
---------------------------------------------------------------
CID Info
CID : 150100303030303030562016061354D1
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20160613
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DB7FE08A40403B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/000000_26_07_2023_00_57_24.bin.
Connect successful.
---------------------------------------------------------------
[COLOR="#0000FF"]SW: 2.2.4.7; FW: 1.24.
Writing eMMC firmware from file: I:/A035F/KG LOCKED/BOOT/KMDX60018M-B425_VCT0_BY_SADEWO_PCB.BIN...Done.
Finalizing...Done.
Write CID succesfully completed.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.4.7; FW: 1.24.
[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]SW: 2.2.4.7; FW: 1.24.
Please select file.
Writing EXT_CSD succesfully complete!
Disconnected.[/COLOR]
---------------------------------------------------------------
Boot config succesfully changed!
Disconnected.
[COLOR="#008000"]RST_n function : (0x01) RST_n signal is permanently enabled[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]SW: 2.2.4.7; FW: 1.24.
Switched to boot area partition 1.
Opening I:/A035F/KG LOCKED/BOOT/BOOT 1 Samsung eMMC DX68MB_26_07_2023_00_19_40.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 2.2.4.7; FW: 1.24.
Switched to boot area partition 2.
Opening I:/A035F/KG LOCKED/BOOT/BOOT 2 Samsung eMMC DX68MB_26_07_2023_00_20_00.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 2.2.4.7; FW: 1.24.[/COLOR]
---------------------------------------------------------------
[COLOR="#0000FF"]The same area.
Opening I:/A035F/A035F U1 LAST SEC/A035FXXU1AVF5 dump/A035FXXU1AVF5 dump.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 2.2.4.7; FW: 1.24.
Disconnected.[/COLOR]
---------------------------------------------------------------
---------------------------------------------------------------
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC DX68M0
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100445836384D30000414CA3B37E5
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DX68M0
Product revision : 0.0
Product serial number : (hex) 414CA3B
Manufacturing date : 03/2020
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x08) 00001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DX68M0_26_07_2023_01_16_54.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000800) 1024 KB
P01: prodnv (00000800, 00005000) 10 MB
P02: miscdata (00005800, 00000800) 1024 KB
P03: l_fixnv1 (00006000, 00001000) 2048 KB
P04: l_fixnv2 (00007000, 00001000) 2048 KB
P05: l_deltanv (00008000, 00000800) 1024 KB
P06: l_runtimenv1 (00008800, 00001000) 2048 KB
P07: l_runtimenv2 (00009800, 00001000) 2048 KB
P08: misc (0000A800, 00000800) 1024 KB
P09: param (0000B000, 00005000) 10 MB
P10: vendor_efs (00010000, 00008000) 16 MB
P11: sec_efs (00018000, 00008000) 16 MB
P12: persist (00020000, 00004000) 8 MB
P13: steady (00024000, 00002000) 4 MB
P14: persistent (00026000, 00000800) 1024 KB
P15: pad (00026800, 00001800) 3072 KB
P16: trustos (00028000, 00003000) 6 MB
P17: trustos_bak (0002B000, 00003000) 6 MB
P18: sml (0002E000, 00000800) 1024 KB
P19: sml_bak (0002E800, 00000800) 1024 KB
P20: pm_sys (0002F000, 00001000) 2048 KB
P21: teecfg (00030000, 00000800) 1024 KB
P22: teecfg_bak (00030800, 00000800) 1024 KB
P23: tzar (00031000, 00002000) 4 MB
P24: uboot (00033000, 00002800) 5 MB
P25: uboot_bak (00035800, 00000800) 1024 KB
P26: vbmeta (00036000, 00000800) 1024 KB
P27: vbmeta_bak (00036800, 00000800) 1024 KB
P28: btd (00037000, 00001000) 2048 KB
P29: uboot_log (00038000, 00008000) 16 MB
P30: logo (00040000, 00003000) 6 MB
P31: fbootlogo (00043000, 00002000) 4 MB
P32: bota (00045000, 00008800) 17 MB
P33: debug (0004D800, 00005000) 10 MB
P34: gnssmodem (00052800, 00000800) 1024 KB
P35: wcnmodem (00053000, 00005000) 10 MB
P36: l_gdsp (00058000, 00005000) 10 MB
P37: l_ldsp (0005D000, 0000A000) 20 MB
P38: l_modem (00067000, 0000F000) 30 MB
P39: boot (00076000, 00020000) 64 MB
P40: recovery (00096000, 00020000) 64 MB
P41: dtbo (000B6000, 00004000) 8 MB
P42: socko (000BA000, 00025800) 75 MB
P43: odmko (000DF800, 0000C000) 24 MB
P44: metadata (000EB800, 00008000) 16 MB
P45: vbmeta_system (000F3800, 00000800) 1024 KB
P46: vbmeta_vendor (000F4000, 00000800) 1024 KB
P47: pad2 (000F4800, 00003800) 7 MB
P48: super (000F8000, 00C99000) 6.299 GB
P49: prism (00D91000, 00094000) 296 MB
P50: optics (00E25000, 0000C000) 24 MB
P51: cache (00E31000, 00064000) 200 MB
P52: omr (00E95000, 0000A000) 20 MB
P53: sysdumpdb (00E9F000, 00005000) 10 MB
P54: l_agdsp (00EA4000, 00003000) 6 MB
P55: userdata (00EA7000, 02B95000) 21.79 GB
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 1015808
Number of sectors : 13209600
---------------------------------------------------------------
Disconnected.
[/LEFT]
[COLOR=#007acc]Model Settings:[/COLOR] Interface : [COLOR=#008c00]USB[/COLOR]
Core : [COLOR=#008c00]Qualcomm MSM8998 UFS[/COLOR]
Loader : [COLOR=#008c00]QLoader_v5_Nokia[/COLOR]
[COLOR=#008c00]
[/COLOR]
[COLOR=#007acc]Connecting...[/COLOR]
[COLOR=#007acc]Please, connect your phone to PC via EDL Mode.[/COLOR]
CpuID : [COLOR=#008c00]0x0005E0E1[/COLOR]
HW_ID : [COLOR=#008c00]0x5E0E100000000[/COLOR]
CpuHASH : [COLOR=#008c00]0x7FE240DDEA200F42252F0F026C801A4737DFF20C416F1292A501BDCEF8792863[/COLOR]
Finished calculating
Sending loader...[COLOR=#008c00]OK.[/COLOR]
[COLOR=#008c00]Loader successfully initialized.[/COLOR]
[COLOR=#008c00]
[/COLOR]
INFO: Device Total Logical Blocks: 0x1db9000
INFO: Device Block Size in Bytes: 0x1000
INFO: Device Total Physical Partitions: 0x0
INFO: Device Manufacturer ID: 0x1ce
INFO: Device Serial Number: 0x4d53554e
INFO: {"storage_info": {"total_blocks":31166464, "block_size":4096, "page_size":4096, "num_physical":6, "manufacturer_id":462, "serial_num":1297306958, "fw_version":"300","mem_type":"UFS","prod_name":"KLUDG8V1EE-B0C1"}}
UFS fInitialized: 0x1
UFS Current LUN Number: = 0xd0
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS Raw Device Capacity: = 0xee60000
UFS Min Block Size: 0x8
UFS Erase Block Size: 0x2000
UFS Allocation Unit Size: 0x1
UFS RPMB ReadWrite Size: = 0x40
UFS Number of Allocation Uint for This LU: 0x0
UFS Logical Block Size: 0x0
UFS Provisioning Type: 0x0
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS dEnhanced1MaxNAllocU: 0x7730
UFS wEnhanced1CapAdjFac: 0x300
UFS dEnhanced2MaxNAllocU: = 0x0
UFS wEnhanced2CapAdjFac: 0x0
UFS dEnhanced3MaxNAllocU: 0x0
UFS wEnhanced3CapAdjFac: 0x0
UFS dEnhanced4MaxNAllocU: 0x0
UFS wEnhanced4CapAdjFac: 0x0
UFS LUN Enable Bitmask: 0x3f
UFS Logical Block Count: 0x0
UFS bConfigDescrLock: 0x0
UFS iManufacturerName String Index: 0x0
UFS iProductName String Index: 0x1
UFS iSerialNumber String Index: 0x2
UFS iOemID String Index: 0x3
UFS Inquiry Command Output: SAMSUNG KLUDG8V1EE-B0C1 0300
ACK
Device : [COLOR=#008c00]SAMSUNG KLUDG8V1EE-B0C1 0300 [/COLOR]
Core : [COLOR=#008c00]Qualcomm MSM8998 UFS[/COLOR]
Page size : [COLOR=#008c00]4096 B[/COLOR]
Block size : [COLOR=#008c00]4096 B[/COLOR]
Block count : [COLOR=#008c00]31240192[/COLOR]
Size : [COLOR=#008c00]119.17 GB (122032.00 MB)[/COLOR]
[COLOR=#008c00]Connect successful.[/COLOR]
---------------------------------------------------------------
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
[COLOR=#007acc]
[/COLOR]
Physical partition number: 0
Block count : [COLOR=#008c00]31166464 (0x1DB9000)[/COLOR]
Size : [COLOR=#008c00]118.89 GB (121744.00 MB)[/COLOR]
P00: GPT (00000000, 00006000) 24 KB
P01: hidden_a (00006000, 02800000) 40 MB
P02: cda_a (02806000, 00800000) 8 MB
P03: systeminfo_a (03006000, 00040000) 256 KB
P04: dsp_a (03046000, 01000000) 16 MB
P05: modem_a (04046000, 06E00000) 110 MB
P06: boot_a (0AE46000, 04000000) 64 MB
P07: system_a (0EE46000, E0000000) 3584 MB
P08: hidden_b (EEE46000, 02800000) 40 MB
P09: cda_b (F1646000, 00800000) 8 MB
P10: systeminfo_b (F1E46000, 00040000) 256 KB
P11: dsp_b (F1E86000, 01000000) 16 MB
P12: modem_b (F2E86000, 06E00000) 110 MB
P13: boot_b (F9C86000, 04000000) 64 MB
P14: system_b (FDC86000, E0000000) 3584 MB
P15: ssd (1DDC86000, 00002000) 8 KB
P16: persist (1DDC88000, 02000000) 32 MB
P17: misc (1DFC88000, 00100000) 1024 KB
P18: keystore (1DFD88000, 00080000) 512 KB
P19: frp (1DFE08000, 00080000) 512 KB
P20: box (1DFE88000, 00800000) 8 MB
P21: hwcfg (1E0688000, 00100000) 1024 KB
P22: sutinfo (1E0788000, 00001000) 4 KB
P23: logdump (1E0789000, 04000000) 64 MB
P24: splash2 (1E4789000, 02400000) 36 MB
P25: elabel (1E6B89000, 01000000) 16 MB
P26: userdata (1E7B89000, 1BD1456000) 111.3 GB
Physical partition number: 1
Block count : [COLOR=#008c00]1024 (0x400)[/COLOR]
Size : [COLOR=#008c00]4.00 MB[/COLOR]
P00: GPT (00000000, 00006000) 24 KB
P01: xbl_a (00006000, 003D9000) 3940 KB
Physical partition number: 2
Block count : [COLOR=#008c00]1024 (0x400)[/COLOR]
Size : [COLOR=#008c00]4.00 MB[/COLOR]
P00: GPT (00000000, 00006000) 24 KB
P01: xbl_b (00006000, 003D9000) 3940 KB
Physical partition number: 3
Block count : [COLOR=#008c00]12288 (0x3000)[/COLOR]
Size : [COLOR=#008c00]48.00 MB[/COLOR]
P00: GPT (00000000, 00006000) 24 KB
P01: cdt (00006000, 00001000) 4 KB
P02: ddr (00007000, 02FD8000) 47.84 MB
Physical partition number: 4
Block count : [COLOR=#008c00]51200 (0xC800)[/COLOR]
Size : [COLOR=#008c00]200.00 MB[/COLOR]
P00: GPT (00000000, 00006000) 24 KB
P01: rpm_a (00006000, 00080000) 512 KB
P02: tz_a (00086000, 00200000) 2048 KB
P03: hyp_a (00286000, 00080000) 512 KB
P04: pmic_a (00306000, 00080000) 512 KB
P05: bluetooth_a (00386000, 00100000) 1024 KB
P06: mdtpsecapp_a (00486000, 00400000) 4 MB
P07: mdtp_a (00886000, 02000000) 32 MB
P08: abl_a (02886000, 00100000) 1024 KB
P09: keymaster_a (02986000, 00080000) 512 KB
P10: cmnlib_a (02A06000, 00080000) 512 KB
P11: cmnlib64_a (02A86000, 00080000) 512 KB
P12: devcfg_a (02B06000, 00020000) 128 KB
P13: splash_a (02B26000, 02400000) 36 MB
P14: rpm_b (04F26000, 00080000) 512 KB
P15: tz_b (04FA6000, 00200000) 2048 KB
P16: hyp_b (051A6000, 00080000) 512 KB
P17: pmic_b (05226000, 00080000) 512 KB
P18: bluetooth_b (052A6000, 00100000) 1024 KB
P19: mdtpsecapp_b (053A6000, 00400000) 4 MB
P20: mdtp_b (057A6000, 02000000) 32 MB
P21: abl_b (077A6000, 00100000) 1024 KB
P22: keymaster_b (078A6000, 00080000) 512 KB
P23: cmnlib_b (07926000, 00080000) 512 KB
P24: cmnlib64_b (079A6000, 00080000) 512 KB
P25: devcfg_b (07A26000, 00020000) 128 KB
P26: splash_b (07A46000, 02400000) 36 MB
P27: sec (09E46000, 00004000) 16 KB
P28: devinfo (09E4A000, 00001000) 4 KB
P29: dip (09E4B000, 00100000) 1024 KB
P30: apdp (09F4B000, 00040000) 256 KB
P31: msadp (09F8B000, 00040000) 256 KB
P32: dpo (09FCB000, 00001000) 4 KB
P33: limits (09FCC000, 00001000) 4 KB
P34: toolsfv (09FCD000, 00100000) 1024 KB
P35: logfs (0A0CD000, 00800000) 8 MB
P36: sti (0A8CD000, 00200000) 2048 KB
P37: storsec (0AACD000, 01D12000) 29.07 MB
Physical partition number: 5
Block count : [COLOR=#008c00]8192 (0x2000)[/COLOR]
Size : [COLOR=#008c00]32.00 MB[/COLOR]
P00: GPT (00000000, 00200000) 2048 KB
P01: modemst1 (00200000, 00200000) 2048 KB
P02: modemst2 (00400000, 00200000) 2048 KB
P03: pad5 (00600000, 001FF000) 2044 KB
P04: deviceinfo (007FF000, 00100000) 1024 KB
P05: securefs (008FF000, 00800000) 8 MB
P06: rf_nv (010FF000, 00200000) 2048 KB
P07: nvcust (012FF000, 00200000) 2048 KB
P08: nvdef_a (014FF000, 00400000) 4 MB
P09: nvdef_b (018FF000, 00400000) 4 MB
P10: fsg (01CFF000, 00200000) 2048 KB
P11: fsc (01EFF000, 000E0000) 896 KB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8V1EE-B0C1 0300 _modemst1_0x200_0x200_30_07_2023_20_23_31.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8V1EE-B0C1 0300 _modemst2_0x400_0x200_30_07_2023_20_23_31.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SAMSUNG KLUDG8V1EE-B0C1 0300 _fsg_0x1cff_0x200_30_07_2023_20_23_31.bin file...
Reading. Please wait... [COLOR=#008c00]Done.[/COLOR]
Elapsed time 00:00:00
[COLOR=#007acc]SW: 2.2.4.7; FW: 1.24.[/COLOR]
[COLOR=#007acc]
[/COLOR]
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : cb000000 bytes
Device sector size : 512 bytes
Partition offset : 60998
Number of sectors : 917504
Device Manufacturer : [COLOR=#008c00]Unknown[/COLOR]
Device Platform : [COLOR=#008c00]msm8998[/COLOR]
Build ID : [COLOR=#008c00]OPR1.170623.026[/COLOR]
Display Build ID : [COLOR=#008c00]00WW_4_88K[/COLOR]
Release ID : [COLOR=#008c00]8.1.0[/COLOR]
Device Model : [COLOR=#008c00]NB1[/COLOR]
Device Name : [COLOR=#008c00]NB1_00WW_FIH[/COLOR]
Architecture ABI : [COLOR=#008c00]arm64-v8a[/COLOR]
Architecture ABI List : [COLOR=#008c00]arm64-v8a,armeabi-v7a,armeabi[/COLOR]
Build Description : [COLOR=#008c00]NB1_00WW_FIH-user 8.1.0 OPR1.170623.026 00WW_4_88K release-keys[/COLOR]
[COLOR=#008c00]
[/COLOR]
---------------------------------------------------------------
Added partition GPT to constructor file.
Added partition hidden_a to constructor file.
Added partition cda_a to constructor file.
Added partition systeminfo_a to constructor file.
Added partition dsp_a to constructor file.
Added partition modem_a to constructor file.
Added partition boot_a to constructor file.
Added partition system_a to constructor file.
Added partition hidden_b to constructor file.
Added partition cda_b to constructor file.
Added partition systeminfo_b to constructor file.
Added partition dsp_b to constructor file.
Added partition modem_b to constructor file.
Added partition boot_b to constructor file.
Added partition system_b to constructor file.
Added partition ssd to constructor file.
Added partition persist to constructor file.
Added partition misc to constructor file.
Added partition keystore to constructor file.
Added partition frp to constructor file.
Added partition box to constructor file.
Added partition hwcfg to constructor file.
Added partition sutinfo to constructor file.
Added partition logdump to constructor file.
Added partition splash2 to constructor file.
Added partition elabel to constructor file.
Added partition GPT to constructor file.
Added partition xbl_a to constructor file.
Added partition GPT to constructor file.
Added partition xbl_b to constructor file.
Added partition GPT to constructor file.
Added partition cdt to constructor file.
Added partition ddr to constructor file.
Added partition GPT to constructor file.
Added partition rpm_a to constructor file.
Added partition tz_a to constructor file.
Added partition hyp_a to constructor file.
Added partition pmic_a to constructor file.
Added partition bluetooth_a to constructor file.
Added partition mdtpsecapp_a to constructor file.
Added partition mdtp_a to constructor file.
Added partition abl_a to constructor file.
Added partition keymaster_a to constructor file.
Added partition cmnlib_a to constructor file.
Added partition cmnlib64_a to constructor file.
Added partition devcfg_a to constructor file.
Added partition splash_a to constructor file.
Added partition rpm_b to constructor file.
Added partition tz_b to constructor file.
Added partition hyp_b to constructor file.
Added partition pmic_b to constructor file.
Added partition bluetooth_b to constructor file.
Added partition mdtpsecapp_b to constructor file.
Added partition mdtp_b to constructor file.
Added partition abl_b to constructor file.
Added partition keymaster_b to constructor file.
Added partition cmnlib_b to constructor file.
Added partition cmnlib64_b to constructor file.
Added partition devcfg_b to constructor file.
Added partition splash_b to constructor file.
Added partition sec to constructor file.
Added partition devinfo to constructor file.
Added partition dip to constructor file.
Added partition apdp to constructor file.
Added partition msadp to constructor file.
Added partition dpo to constructor file.
Added partition limits to constructor file.
Added partition toolsfv to constructor file.
Added partition logfs to constructor file.
Added partition sti to constructor file.
Added partition storsec to constructor file.
Added partition GPT to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition pad5 to constructor file.
Added partition deviceinfo to constructor file.
Added partition securefs to constructor file.
Added partition rf_nv to constructor file.
Added partition nvcust to constructor file.
Added partition nvdef_a to constructor file.
Added partition nvdef_b to constructor file.
Added partition fsg to constructor file.
Added partition fsc to constructor file.
[COLOR=#008c00]SRF "F:/MOBILE PHONE/NOKIA/TA-1004/Nokia_TA-1004_TP_BY_DZGSM TEAM.srf" has been installed successfully
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC GX6BMB
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100475836424D4200DE09D24C97FB
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : GX6BMB
Product revision : 0.0
Product serial number : (hex) DE09D24C
Manufacturing date : 09/2020
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 15261696 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/GX6BMB_07_08_2023_23_12_44.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00002028) 4.02 MB
P01: sbl1 (00002028, 00000400) 512 KB
P02: rpm (00002428, 00000400) 512 KB
P03: tz (00002828, 00001000) 2048 KB
P04: devcfg (00003828, 00000200) 256 KB
P05: dsp (00003A28, 00008000) 16 MB
P06: mdtp (0000BA28, 00010000) 32 MB
P07: sbl1bak (0001BA28, 00000400) 512 KB
P08: rpmbak (0001BE28, 00000400) 512 KB
P09: tzbak (0001C228, 00001000) 2048 KB
P10: devcfgbak (0001D228, 00002DD8) 5.73 MB
P11: lksecapp (00020000, 00000100) 128 KB
P12: cmnlib (00020100, 00000800) 1024 KB
P13: cmnlib64 (00020900, 00000800) 1024 KB
P14: keymaster (00021100, 00000800) 1024 KB
P15: aboot (00021900, 00001000) 2048 KB
P16: vbmeta (00022900, 00000080) 64 KB
P17: reserved (00022980, 00001680) 2880 KB
P18: vk (00024000, 00001000) 2048 KB
P19: em (00025000, 00002000) 4 MB
P20: bksecapp (00027000, 00000400) 512 KB
P21: btd (00027400, 00000C00) 1536 KB
P22: lksecappbak (00028000, 00000100) 128 KB
P23: cmnlibbak (00028100, 00000800) 1024 KB
P24: cmnlib64bak (00028900, 00000800) 1024 KB
P25: keymasterbak (00029100, 00000800) 1024 KB
P26: abootbak (00029900, 00001000) 2048 KB
P27: dtbo (0002A900, 00004000) 8 MB
P28: vbmetabak (0002E900, 00000080) 64 KB
P29: apnhlos (0002E980, 00035680) 106.8 MB
P30: fsc (00064000, 00001A00) 3328 KB
P31: ssd (00065A00, 00000200) 256 KB
P32: mota (00065C00, 00000400) 512 KB
P33: dip (00066000, 00002000) 4 MB
P34: ddr (00068000, 00000400) 512 KB
P35: sec (00068400, 00000200) 256 KB
P36: fsg (00068600, 00005000) 10 MB
P37: limits (0006D600, 00000040) 32 KB
P38: devinfo (0006D640, 000029C0) 5.219 MB
P39: pad (00070000, 00000200) 256 KB
P40: modemst1 (00070200, 00002000) 4 MB
P41: modemst2 (00072200, 00002000) 4 MB
P42: sec_efs (00074200, 00008000) 16 MB
P43: efs (0007C200, 00008000) 16 MB
P44: splash (00084200, 00005800) 11 MB
P45: apdp (00089A00, 00000200) 256 KB
P46: msadp (00089C00, 00000200) 256 KB
P47: param (00089E00, 00006000) 12 MB
P48: persist (0008FE00, 00010000) 32 MB
P49: misc (0009FE00, 00000800) 1024 KB
P50: syscfg (000A0600, 00000400) 512 KB
P51: mcfg (000A0A00, 00002000) 4 MB
P52: dpo (000A2A00, 00000010) 8 KB
P53: logdump (000A2A10, 00020000) 64 MB
P54: keystore (000C2A10, 00000400) 512 KB
P55: config (000C2E10, 00000040) 32 KB
P56: oem (000C2E50, 00080000) 256 MB
P57: boot (00142E50, 00020000) 64 MB
P58: recovery (00162E50, 00020000) 64 MB
P59: debug (00182E50, 000051B0) 10.21 MB
P60: steady (00188000, 00002000) 4 MB
P61: persistent (0018A000, 00000400) 512 KB
P62: bota (0018A400, 00011C00) 35.5 MB
P63: system (0019C000, 00780000) 3840 MB
P64: vendor (0091C000, 001E8000) 976 MB
P65: product (00B04000, 000A4000) 328 MB
P66: cache (00BA8000, 0006A000) 212 MB
P67: omr (00C12000, 0001B800) 55 MB
P68: modem (00C2D800, 0002E800) 93 MB
P69: userdata (00C5C000, 02DE1FD8) 22.94 GB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GX6BMB_fsg_0x68600_0x5000_07_08_2023_23_12_44.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:04
SW: 2.2.4.7; FW: 1.24.
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GX6BMB_modemst1_0x70200_0x2000_07_08_2023_23_12_44.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GX6BMB_modemst2_0x72200_0x2000_07_08_2023_23_12_44.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/GX6BMB_efs_0x7c200_0x8000_07_08_2023_23_12_44.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:07
SW: 2.2.4.7; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 1687552
Number of sectors : 7864320
Build ID : RP1A.200720.012
Display Build ID : RP1A.200720.012.A207FXXU3CUL1
Release ID : 11
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : a20sxx-user 11 RP1A.200720.012 A207FXXU3CUL1 release-keys
---------------------------------------------------------------
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0xc2e10_0x40_07_08_2023_23_15_11.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.4.7; FW: 1.24.
Partition table has been found on device.
Erasing. Please wait...
Erasing partition persistent... Done.
Erasing is finished.
SW: 2.2.4.7; FW: 1.24.
Disconnected.
Welcome to Medusa Pro Software version 2.2.4.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: Generic EMV Smartcard Reader 0
Reader #3: Generic EMV Smartcard Reader 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
ERROR[001]: Can not connect. No target device present.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 2.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC QE63MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100514536334D4203F1B1CE1EA501
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QE63MB
Full name one from : KMQE60013M-B318
Product revision : 0.3
Product serial number : (hex) F1B1CE1E
Manufacturing date : 10/2018
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7626752 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/QE63MB_12_12_2023_20_42_40.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
P00: GPT (00000000, 00000028) 20 KB
P01: oppodycnvbk (00000028, 00005000) 10 MB
P02: oppostanvbk (00005028, 00005000) 10 MB
P03: modemst1 (0000A028, 00000C00) 1536 KB
P04: modemst2 (0000AC28, 00000C00) 1536 KB
P05: persist (0000B828, 00010000) 32 MB
P06: opporeserve1 (0001B828, 00004000) 8 MB
P07: opporeserve2 (0001F828, 00020000) 64 MB
P08: fsc (0003F828, 00000002) 1024 b
P09: ssd (0003F830, 00000010) 8 KB
P10: sbl1 (0003F840, 00000400) 512 KB
P11: rpm (0003FC40, 00000400) 512 KB
P12: tz (00040040, 00001000) 2048 KB
P13: devcfg (00041040, 00000200) 256 KB
P14: sbl1bak (00041240, 00000400) 512 KB
P15: rpmbak (00041640, 00000400) 512 KB
P16: tzbak (00041A40, 00001000) 2048 KB
P17: devcfgbak (00042A40, 00000200) 256 KB
P18: dsp (00042C40, 00008000) 16 MB
P19: DDR (0004C000, 00000040) 32 KB
P20: fsg (0004C040, 00002000) 4 MB
P21: sec (0004E040, 00000020) 16 KB
P22: aboot (0004E060, 00000800) 1024 KB
P23: abootbak (0004E860, 00000800) 1024 KB
P24: modem (0004F060, 00040000) 128 MB
P25: dtbo (0008F060, 00004000) 8 MB
P26: vbmeta (00093060, 00000080) 64 KB
P27: boot (000930E0, 00020000) 64 MB
P28: recovery (000B30E0, 00020000) 64 MB
P29: devinfo (000D30E0, 00000800) 1024 KB
P30: splash (000D4000, 00005800) 11 MB
P31: LOGO (000D9800, 00010000) 32 MB
P32: DRIVER (000E9800, 00010000) 32 MB
P33: cache (000F9800, 00080000) 256 MB
P34: misc (00179800, 00000800) 1024 KB
P35: keystore (0017A000, 00000400) 512 KB
P36: config (0017A400, 00000040) 32 KB
P37: log (0017A440, 00020000) 64 MB
P38: oem (0019A440, 00000800) 1024 KB
P39: limits (0019C000, 00000040) 32 KB
P40: mota (001A0000, 00000400) 512 KB
P41: dip (001A0400, 00000800) 1024 KB
P42: mdtp (001A0C00, 00010000) 32 MB
P43: syscfg (001B0C00, 00000400) 512 KB
P44: mcfg (001B1000, 00002000) 4 MB
P45: lksecapp (001B4000, 00000100) 128 KB
P46: cmnlib (001B4100, 00000800) 1024 KB
P47: cmnlib64 (001B4900, 00000800) 1024 KB
P48: keymaster (001B5100, 00000800) 1024 KB
P49: lksecappbak (001B5900, 00000100) 128 KB
P50: cmnlibbak (001B5A00, 00000800) 1024 KB
P51: cmnlib64bak (001B6200, 00000800) 1024 KB
P52: keymasterbak (001B6A00, 00000800) 1024 KB
P53: apdp (001B8000, 00000200) 256 KB
P54: msadp (001B8200, 00000200) 256 KB
P55: dpo (001B8400, 00000010) 8 KB
P56: logdump (001B8410, 00020000) 64 MB
P57: vm-kystore (001D8410, 00000800) 1024 KB
P58: vm-data (001D8C10, 00005000) 10 MB
P59: hyp (001E0000, 00004000) 8 MB
P60: vm-system (001E4000, 00020000) 64 MB
P61: vm-linux (00204000, 00010000) 32 MB
P62: system (00214000, 006B4800) 3433 MB
P63: vendor (008C8800, 0020FB00) 1055 MB
P64: userdata (00ADC000, 01242FDF) 9.131 GB
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_modemst1_0xa028_0xc00_12_12_2023_20_42_40.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_modemst2_0xac28_0xc00_12_12_2023_20_42_40.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.4.7; FW: 1.24.
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/QE63MB_fsg_0x4c040_0x2000_12_12_2023_20_42_40.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 2.2.4.7; FW: 1.24.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : a3e00000 bytes
Device sector size : 512 bytes
Partition offset : 2179072
Number of sectors : 7030784
Device Manufacturer : OPPO
Build ID : OPM1.171019.026
Release ID : 8.1.0
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20201227.212730 release-keys
---------------------------------------------------------------
Reset operation finished
Disconnected.
Model Settings:
Interface : USB
Loading custom loader F:/MOBILE PHONE/HUAWEI/TRT-L21A Y7 Prime 2017/prog_emmc_firehose.mbn file...
Core : Custom Loader
Loader : prog_emmc_firehose.mbn
Connecting...
Please, connect your phone to PC via EDL Mode.
CpuID : 0x0006B0E1
HW_ID : 0x6B0E100150062
CpuHASH : 0x6BC369511DA9CADB3A7AF61574F89DB385003D6241BDD1FF573DBA61BF6AE119
Finished calculating
Sending loader...OK.
Loader successfully initialized.
Device : CoreID_0006B0E1
Core : Custom Loader
Page size : 512 B
Block size : 512 B
Block count : 61071360
Size : 29.12 GB (29820.00 MB)
Connect successful.
---------------------------------------------------------------
SW: 2.2.5; FW: 0.00.
P00: GPT (00000000, 00004400) 17 KB
P01: sbl1 (00004400, 00080000) 512 KB
P02: rpm (00084400, 00080000) 512 KB
P03: tz (00104400, 00200000) 2048 KB
P04: devcfg (00304400, 00040000) 256 KB
P05: sbl1bak (00344400, 00080000) 512 KB
P06: rpmbak (003C4400, 00080000) 512 KB
P07: tzbak (00444400, 00200000) 2048 KB
P08: devcfgbak (00644400, 00040000) 256 KB
P09: dsp (00684400, 01000000) 16 MB
P10: pad0 (01684400, 0097BC00) 9.483 MB
P11: aboot (02000000, 00800000) 8 MB
P12: cmnlib (02800000, 00040000) 256 KB
P13: cmnlib64 (02840000, 00040000) 256 KB
P14: keymaster (02880000, 00040000) 256 KB
P15: abootbak (028C0000, 00800000) 8 MB
P16: cmnlibbak (030C0000, 00040000) 256 KB
P17: cmnlib64bak (03100000, 00040000) 256 KB
P18: keymasterbak (03140000, 00040000) 256 KB
P19: fsg (03180000, 00400000) 4 MB
P20: DDR (03580000, 00008000) 32 KB
P21: sec (03588000, 00004000) 16 KB
P22: devinfo (0358C000, 00100000) 1024 KB
P23: limits (0368C000, 00008000) 32 KB
P24: oeminfo (04000000, 04000000) 64 MB
P25: misc (08000000, 00400000) 4 MB
P26: modemst1 (08400000, 00400000) 4 MB
P27: modemst2 (08800000, 00400000) 4 MB
P28: fsc (08C00000, 00000400) 1024 b
P29: ssd (08C00400, 00002000) 8 KB
P30: nff (08C02400, 00800000) 8 MB
P31: splash2 (09402400, 00800000) 8 MB
P32: pad1 (09C02400, 003FDC00) 4087 KB
P33: modem (0A000000, 0A000000) 160 MB
P34: erecovery (14000000, 05000000) 80 MB
P35: boot (19000000, 05000000) 80 MB
P36: recovery (1E000000, 05000000) 80 MB
P37: cache (24000000, 10000000) 256 MB
P38: persist (34000000, 04000000) 64 MB
P39: log (38000000, 04000000) 64 MB
P40: keystore (3C000000, 00080000) 512 KB
P41: config (3C080000, 00080000) 512 KB
P42: mota (3C100000, 00080000) 512 KB
P43: dip (3C180000, 00100000) 1024 KB
P44: mdtp (3C280000, 02000000) 32 MB
P45: syscfg (3E280000, 00080000) 512 KB
P46: mcfg (3E300000, 00400000) 4 MB
P47: lksecapp (3E700000, 00020000) 128 KB
P48: lksecappbak (3E720000, 00020000) 128 KB
P49: apdp (3E740000, 00040000) 256 KB
P50: msadp (3E780000, 00040000) 256 KB
P51: dpo (3E7C0000, 00002000) 8 KB
P52: rrecord (3E7C2000, 01000000) 16 MB
P53: patch (3F7C2000, 02000000) 32 MB
P54: bootfail_info (417C2000, 00200000) 2048 KB
P55: pad2 (419C2000, 0063E000) 6.242 MB
P56: logdump (42000000, 04000000) 64 MB
P57: version (46000000, 02000000) 32 MB
P58: vendor (48000000, 26000000) 608 MB
P59: product (6E000000, 0C000000) 192 MB
P60: cust (7A000000, 0C000000) 192 MB
P61: system (86000000, 99000000) 2448 MB
P62: userdata (120000000, 627BFBE00) 24.62 GB
Backuping fsg partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_fsg_0x18c00_0x2000_22_12_2023_23_06_45.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5; FW: 0.00.
Backuping oeminfo partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_oeminfo_0x20000_0x20000_22_12_2023_23_06_45.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:10
SW: 2.2.5; FW: 0.00.
Backuping modemst1 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst1_0x42000_0x2000_22_12_2023_23_06_45.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5; FW: 0.00.
Backuping modemst2 partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/_modemst2_0x44000_0x2000_22_12_2023_23_06_45.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5; FW: 0.00.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 47c00000 bytes
Device sector size : 512 bytes
Partition offset : 4390912
Number of sectors : 5013504
Device Manufacturer : unknown
Device Platform :
Build ID : NRD90M
Display Build ID : System 5.1.0.78(0ZL6)
Release ID : 7.0
Device Model : generic_a53_32
Device Name : generic_a53_32
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : generic_a53_32-user 7.0 NRD90M eng.jenkin.20180706.143308 test-keys
---------------------------------------------------------------
Added partition GPT to constructor file.
Added partition sbl1 to constructor file.
Added partition rpm to constructor file.
Added partition tz to constructor file.
Added partition devcfg to constructor file.
Added partition sbl1bak to constructor file.
Added partition rpmbak to constructor file.
Added partition tzbak to constructor file.
Added partition devcfgbak to constructor file.
Added partition dsp to constructor file.
Added partition pad0 to constructor file.
Added partition aboot to constructor file.
Added partition cmnlib to constructor file.
Added partition cmnlib64 to constructor file.
Added partition keymaster to constructor file.
Added partition abootbak to constructor file.
Added partition cmnlibbak to constructor file.
Added partition cmnlib64bak to constructor file.
Added partition keymasterbak to constructor file.
Added partition fsg to constructor file.
Added partition DDR to constructor file.
Added partition sec to constructor file.
Added partition devinfo to constructor file.
Added partition limits to constructor file.
Added partition oeminfo to constructor file.
Added partition misc to constructor file.
Added partition modemst1 to constructor file.
Added partition modemst2 to constructor file.
Added partition fsc to constructor file.
Added partition ssd to constructor file.
Added partition nff to constructor file.
Added partition splash2 to constructor file.
Added partition pad1 to constructor file.
Added partition modem to constructor file.
Added partition erecovery to constructor file.
Added partition boot to constructor file.
Added partition recovery to constructor file.
Added partition cache to constructor file.
Added partition persist to constructor file.
Added partition log to constructor file.
Added partition keystore to constructor file.
Added partition config to constructor file.
Added partition mota to constructor file.
Added partition dip to constructor file.
Added partition mdtp to constructor file.
Added partition syscfg to constructor file.
Added partition mcfg to constructor file.
Added partition lksecapp to constructor file.
Added partition lksecappbak to constructor file.
Added partition apdp to constructor file.
Added partition msadp to constructor file.
Added partition dpo to constructor file.
Added partition rrecord to constructor file.
Added partition patch to constructor file.
Added partition bootfail_info to constructor file.
Added partition pad2 to constructor file.
Added partition logdump to constructor file.
Added partition version to constructor file.
Added partition vendor to constructor file.
Added partition product to constructor file.
Added partition cust to constructor file.
Added partition system to constructor file.
SRF "F:/MOBILE PHONE/HUAWEI/TRT-TL10⬠Y7 Prime 2017/Huawei_TRT-TL10 Y7 Prime 2017.srf" has been installed successfully.
Welcome to Medusa Pro Software version 2.2.5.
Activation type:
Used the activation PRO
Started.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC DC6DMB
Page size : 512 B
Block size : 512 B
Block count : 122142720
Size : 58.24 GB (59640.00 MB)
---------------------------------------------------------------
CID Info
CID : 150100444336444D4200F2ECCCC63965
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : DC6DMB
Product revision : 0.0
Product serial number : (hex) F2ECCCC6
Manufacturing date : 03/2022
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.8 (for MMC v5.1)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 16384 Kbytes
Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 4Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : (0x01) 00000001
Boot bus width : x4 (sdr/ddr) bus width in boot operation mode
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 30531584 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/DC6DMB_20_01_2024_23_10_20.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.5; FW: 1.26.
P00: GPT (00000000, 00002000) 4 MB
P01: efs (00002000, 0000A000) 20 MB
P02: sec_efs (0000C000, 0000A000) 20 MB
P03: reserved (00016000, 00002000) 4 MB
P04: cpefs (00018000, 00004000) 8 MB
P05: steady (0001C000, 00002000) 4 MB
P06: param (0001E000, 00004000) 8 MB
P07: bota (00022000, 00012000) 36 MB
P08: ldfw (00034000, 00004000) 8 MB
P09: tzsw (00038000, 00000C00) 1536 KB
P10: tzar (00038C00, 00003400) 6.5 MB
P11: keystorage (0003C000, 00000400) 512 KB
P12: nad_refer (0003C400, 00000800) 1024 KB
P13: up_param (0003CC00, 00004000) 8 MB
P14: misc (00040C00, 00001000) 2048 KB
P15: uh (00041C00, 00001000) 2048 KB
P16: uhcfg (00042C00, 00002000) 4 MB
P17: blcmd (00044C00, 00000400) 512 KB
P18: boot (00045000, 00016000) 44 MB
P19: recovery (0005B000, 0001A800) 53 MB
P20: dtb (00075800, 00004000) 8 MB
P21: dtbo (00079800, 00004000) 8 MB
P22: radio (0007D800, 00019000) 50 MB
P23: persistent (00096800, 00000400) 512 KB
P24: vbmeta (00096C00, 00000400) 512 KB
P25: vbmeta_system (00097000, 00000400) 512 KB
P26: keyrefuge (00097400, 00008000) 16 MB
P27: keydata (0009F400, 00008000) 16 MB
P28: metadata (000A7400, 00010000) 32 MB
P29: fmp_selftest (000B7400, 00000008) 4 KB
P30: reserved2 (000B7408, 00000BF8) 1532 KB
P31: super (000B8000, 00B36000) 5.605 GB
P32: prism (00BEE000, 00140000) 640 MB
P33: optics (00D2E000, 0000A000) 20 MB
P34: cache (00D38000, 00064000) 200 MB
P35: omr (00D9C000, 00019000) 50 MB
P36: cp_debug (00DB5000, 00002800) 5 MB
P37: spu (00DB7800, 00019000) 50 MB
P38: userdata (00DD0800, 066A8000) 51.33 GB
Backuping efs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/DC6DMB_efs_0x2000_0xa000_20_01_2024_23_10_20.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:07
SW: 2.2.5; FW: 1.26.
Backuping cpefs partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/DC6DMB_cpefs_0x18000_0x4000_20_01_2024_23_10_20.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:03
SW: 2.2.5; FW: 1.26.
---------------------------------------------------------------
Searching Android build info...
Ok
Disk/Image size : 8f800000 bytes
Device sector size : 512 bytes
Partition offset : 753664
Number of sectors : 11755520
Build ID : TP1A.220624.014
Display Build ID : TP1A.220624.014.M127FXXU6DWI3
Release ID : 13
Architecture ABI : arm64-v8a
Architecture ABI List : arm64-v8a,armeabi-v7a,armeabi
Build Description : m12nsxx-user 13 TP1A.220624.014 M127FXXU6DWI3 release-keys
---------------------------------------------------------------
RPMB: Counter of the successful data write requests = 2542.
Backuping FRP data...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/FRP_0x96800_0x400_20_01_2024_23_11_36.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.5; FW: 1.26.
Removing FRP. Please wait... Done.
Perform a Factory data reset from the phone menu.
SW: 2.2.5; FW: 1.26.
Disconnected.